[OGo-MacOSX] Instructions for MacOSX install... with some problems

Fri, 21 Apr 2006 12:29:15 +0200

Hello,

Sorry for cross posting... I simply "replied" to the other post!

Here is the post which should have been in this list:

====
Ok,

It is not perfect, but here is what I managed to do. Basically, it  
compiles, installs.... however, when I run the server I get errors  
and can't connect to it (neither in direct mode, nor through the  
Apache adaptor).

The errors I get in the terminal are:

($:/GNUstep/Tools)-> /GNUstep/Tools/ogo-webui-1.1 -WOPort 20000 - 
WOHttpAllowHost localhost
2006-04-21 12:23:36.978 ogo-webui-1.1[12360] ERROR(NGBundleManager):  
did not find bundle 'LSAddress' (type=cmd) required by bundle / 
GNUstep/Library/OpenGroupware.org-1.1/Commands/LSAccount.cmd.
2006-04-21 12:23:37.011 ogo-webui-1.1[12360] account::change- 
password: using password field: 'userPassword'
2006-04-21 12:23:37.016 ogo-webui-1.1[12360] ERROR(NGBundleManager):  
did not find bundle 'LSSearch' (type=cmd) required by bundle /GNUstep/ 
Library/OpenGroupware.org-1.1/Commands/LSAddress.cmd.
2006-04-21 12:23:37.046 ogo-webui-1.1[12360] Note: storing cached  
vCards files in: '/var/lib/opengroupware.org/documents'
2006-04-21 12:23:37.077 ogo-webui-1.1[12360] ERROR(NGBundleManager):  
did not find bundle 'LSSearch' (type=cmd) required by bundle /GNUstep/ 
Library/OpenGroupware.org-1.1/Commands/LSDocuments.cmd.
2006-04-21 12:23:37.106 ogo-webui-1.1[12360] ERROR(NGBundleManager):  
did not find bundle 'LSSearch' (type=cmd) required by bundle /GNUstep/ 
Library/OpenGroupware.org-1.1/Commands/LSMail.cmd.
2006-04-21 12:23:37.111 ogo-webui-1.1[12360] ERROR: did not find  
executable sendmail file: '/usr/lib/sendmail'
2006-04-21 12:23:37.138 ogo-webui-1.1[12360] ERROR(NGBundleManager):  
did not find bundle 'LSSearch' (type=cmd) required by bundle /GNUstep/ 
Library/OpenGroupware.org-1.1/Commands/LSProject.cmd.
2006-04-21 12:23:37.217 ogo-webui-1.1[12360] Note: members of role  
team 'team creators' are allowed to create teams.
2006-04-21 12:23:37.386 ogo-webui-1.1[12360] Note: located themes:  
OOo, blue, kde, orange
2006-04-21 12:23:37.388 ogo-webui-1.1[12360] Note: located no  
additional translations.
Apr 21 12:23:37 ogo-webui-1.1 [12360]: |ogo-webui-1.1| CTI Dialers:
2006-04-21 12:23:37.404 ogo-webui-1.1[12360] WOCompoundElement: pool  
embedding is on.
2006-04-21 12:23:37.404 ogo-webui-1.1[12360] WOCompoundElement: id  
logging is on.
Apr 21 12:23:37 ogo-webui-1.1 [12360]: [WARN] <0x005B9230 
[OGoContextManager]> disabled login spaces which are unsupported on  
this Foundation library.
Apr 21 12:23:37 ogo-webui-1.1 [12360]: |ogo-webui-1.1| root has no  
password, you need to assign one!
Apr 21 12:23:37 ogo-webui-1.1 [12360]: |ogo-webui-1.1|  
OpenGroupware.org instance initialized.
Apr 21 12:23:37 ogo-webui-1.1 [12360]: |ogo-webui-1.1| WOHttpAdaptor  
listening on address *:20000

====
Now, here are the instructions I put together with the help of the  
documentation and feedback from Helge!

==============================================
OpenGroupware MacOSX Install:

1: Postgres install and initial config
======================================

Download it from www.entropy.ch

It's easy, it's a package.

Then follow instructions on site to create a postgres user and start  
the database server.

You can also install a package which shall create a StartupItem in / 
Library to start postgres upon startup of the system.

Now, you need to create a database for OGo. If you create a database  
called OGo with a user OGo and no password, the OGo server will login  
automatically without needing any additionnal setup.
First become postgres (if you are continuing from the steps described  
on the entropy site, you are probably already postgres):

	su - postgres

Then create a OGo user:

	/usr/local/bin/createuser OGo

	(answer no to the three questions: is a super user, can create  
databases, can create roles)

Finally create the database (named OGo with owner OGo):

	/usr/local/bin/createdb -O OGo OGo

To check the database exists, you can simply connect to it:

	/usr/local/bin/psql OGo

If you are doing this from your postgres account (suggested) you will  
be a superuser for this database and see the following prompt:

	OGo=#

You can quit typing "\q"

Now exit from your postgres account:

	exit

And try to connect again to the database, but this time you will need  
to identify yourself:

	/usr/local/bin/psql -U OGo

No password is needed (we didn't set one on purpose) so you will see  
the following prompt:

	OGo=>

Quit by typing "\q"

2: Create a workspace and download the source for SOPE and OGo
==============================================================

For example create : $HOME/_Workspace

Then get the SOPE package:

for example, the latest release of SOPE (as of 19th of april 2006)

	svn co http://svn.opengroupware.org/SOPE/releases/4.5.6-morecore/  
$HOME/_Workspace/SOPE-4.5.6

and the latest release of OGo

	svn co http://svn.opengroupware.org/OpenGroupware.org/releases/1.1.3- 
moveon/ $HOME/_Workspace/OGo-1.1.3

4: Compile the source
=====================
Although the distribution contains xcode projects, in order to  
compile and run OGo, you need to compile it in the GNUstep way. This  
will ensure the libraries are compiled and installed in the correct  
place for OGo.

4.1: Preparing the make environment
===================================
There are two things important here. The first is to decide where the  
GNUstep directory is going to be installed. You could put it in your  
home but since it will be used for libraries, etc... I recommend  
simply puting at the root of your disk (like /opt or /usr). The  
second important thing is to specify apple-apple-nil for the library- 
combo option. This will indicate you are using the Cocoa libraries  
instead of the GNUstep libraries for a certain number of foundation  
functions.

So, from your SOPE directory:

	cd gnustep-make
	./configure 	--prefix=/GNUstep \
			--without-system-root \
			--with-network-root=/GNUstep \
			--with-local-root=/GNUstep \
			--with-user-root=/GNUstep \
			--with-library-combo=apple-apple-nil

Now you can build your GNUstep environment:

	make install

You can see a /GNUstep directory at the root of your disk.

Now, run:

	source /GNUstep/Library/Makefiles/GNUstep.sh

(assuming you put GNUstep at the root of your disk).

In order to have environment variables correctly set, it is a good  
idea to add that line to your .bashrc file in your home directory (or  
in any home which might have to compile or run OGo).

4.2: Compile and install SOPE
=============================

First go to the SOPE directory.
Then run configure:

	./configure --disable-strip --enable-debug --with-gnustep

Then make:

	make all

Then make install (if you are installing in the GNUstep tree you  
created yourself, you shouldn't need to sudo):

	make install

The install will add (in your GNUstep tree):

	Library/GDLAdaptors-4.5/...
	Library/SaxDrivers-4.5/...
	Library/SaxMappings/...
	Library/SoProducts-4.5/...
	Library/WOxElemBuilders-4.5/...

	Library/Headers/manydirectoriesfullofheaders...

	Library/Libraries/manylibraries...

	Library/Libraries/Resources/NGObjWeb/...

	Library/Makefiles/woapp.make
	Library/Makefiles/wobundle.make
	Library/Makefiles/Additional/ngobjweb.make

	Library/Tools/connect-EOAdaptor
	Library/Tools/domxml
	Library/Tools/gcs_cat
	Library/Tools/gcs_gensql
	Library/Tools/gcs_ls
	Library/Tools/gcs_mkdir
	Library/Tools/gcs_recreatequick
	Library/Tools/ldap2dsml
	Library/Tools/ldapchkpwd
	Library/Tools/ldapls
	Library/Tools/load-EOAdaptor
	Library/Tools/rss2plist1
	Library/Tools/rss2plist2
	Library/Tools/rssparse
	Library/Tools/saxxml
	Library/Tools/sope-4.5
	Library/Tools/testqp
	Library/Tools/wod
	Library/Tools/xmln
	Library/Tools/xmlrpc_call

4.3: Compile and install OGo
============================

First go to the OGo directory.

Then run configure:

	./configure --disable-strip --enable-debug --with-gnustep

Then make:

	make all

You might see some warnings such as

Linking bundle PrefsUI ...
/usr/bin/ld: warning can't open dynamic library:  
libLSFoundation_d.dylib.5.3 referenced from: ../ZSBackend/./ 
shared_debug_obj/libZSBackend_d.dylib (checking for undefined symbols  
may be affected) (No such file or directory, errno = 2)
/usr/bin/ld: warning can't open dynamic library: libNGLdap_d.dylib. 
4.5 referenced from: ../ZSBackend/./shared_debug_obj/ 
libZSBackend_d.dylib (checking for undefined symbols may be affected)  
(No such file or directory, errno = 2)

or

Linking bundle LSAddress ...
/usr/bin/ld: warning can't open dynamic library: libNGiCal_d.dylib. 
4.5 referenced from: ././shared_debug_obj/libLSAddress_d.dylib  
(checking for undefined symbols may be affected) (No such file or  
directory, errno = 2)

But it doesn't seem to be important...

Then install:

	make install

The install process moved some files to your GNUstep tree:

	OpenGroupware.org-1.1/...

	Library/Headers/LSFoundation/...
	Library/Headers/OGoAccounts/...
	Library/Headers/OGoBase/...
	Library/Headers/OGoContacts/...
	Library/Headers/OGoDatabaseProject/...
	Library/Headers/OGoDocuments/...
	Library/Headers/OGoFileSystemProject/...
	Library/Headers/OGoFoundation/...
	Library/Headers/OGoJobs/...
	Library/Headers/OGoProject/...
	Library/Headers/OGoRawDatabase/...
	Library/Headers/OGoScheduler/...
	Library/Headers/OGoSchedulerTools/...
	Library/Headers/OGoWebMail/...

	Library/Libraries/...

	Library/Libraries/Resources/OGoScheduler/...

	Tools/load-LSModel
	Tools/ogo-webui-1.1

5: Create the OGo database schema
=================================

So, now everything is in place, we can create the Postgres database  
schema.

Again become a postgres user:

	su - postgres

Then go to the directory containing the scripts (in the OGo source  
tree):

	cd the_path_to_ogo/Database/PostgreSQL

Connect to the database OGo as user OGo and run the script:

	/usr/local/bin/psql -h localhost OGo OGo < pg-build-schema.psql

6: Enable OGo to find its resources
===================================

 From the command line (as usuall):

	pushd $GNUSTEP_USER_ROOT
	ln -s the_path_to_the_ogo_sources/OGo-1.1.3/WebUI/Resources .

(don't forget the final "." and don't add a trailing "/" to Resources)

	ln -s the_path_to_the_ogo_sources/OGo-1.1.3/Themes/WebServerResources .
	ln -s the_path_to_the_ogo_sources/_Workspace/OGo-1.1.3/WebUI/ 
Templates Library/OpenGroupware.org-1.1/Templates

You can now see a in your GNUstep root, a link to Resources, another  
one to WebServerResources and one to Templates in Library/ 
OpenGroupware.org-1.1

7: Build the Apache adaptor
===========================

The adaptor is in your SOPE source:

	cd path_to_sope/SOPE-4.5/sope-appserver/mod_ngobjweb

You will need to edit the GNUMakeFile (make a backup first) and  
comment out the following lines:

	# lowercase are commandline args (eg make apxs=/usr/bin/apxs)
	#ifneq ($(apxs),no)
	#ifneq ($(apxs),yes)
	#ifneq ($(apxs),)
	#APXS=$(apxs)
	#else
	#APXS=$(shell which apxs 2>/dev/null)
	#endif
	#else
	#APXS=$(shell which apxs 2>/dev/null)
	#endif
	#else
	#APXS=
	#endif

	# lowercase are commandline args (eg make apr=/usr/bin/apr)
	#ifneq ($(apr),no)
	#ifneq ($(apr),yes)
	#ifneq ($(apr),)
	#APR=$(apr)
	#else
	#APR=$(shell which apr-config 2>/dev/null)
	#endif
	#else
	#APR=$(shell which apr-config 2>/dev/null)
	#endif
	#else
	#APR=
	#endif

	#ifeq ($(APXS),)
	#APXS=$(shell which apxs2 2>/dev/null)
	#ifeq ($(APXS),)
	#APXS   = $(APACHE)/sbin/apxs2
	#endif
	#endif

Then build the adaptor:

	make

It should create (after a few warnings) a file called mod_ngobjweb.so
You need to copy it into the modules directory for Apache:

	sudo cp mod_ngobjweb.so /usr/libexec/httpd

Then modify your httpd.conf file to make Apache load the module.
It is located in /etc/httpd

After the lines loading other modules, add:

	LoadModule ngobjweb_module	libexec/httpd/mod_ngobjweb.so

Same after the line adding the .c files:

	AddModule ngobjweb_module.c

In order to have the module redirect calls correctly, you need to add  
this to the end of the httpd.conf file:

	<LocationMatch "^/OpenGroupware*">
	SetHandler ngobjweb-adaptor
	SetAppPort 20000
	</LocationMatch>

8: Start the server!
====================

Make sure you stoped and started the Apache server (simplest through  
the preferences panel "Sharing").

Then start from a terminal your OGo server:

	/GNUstep/Tools/ogo-webui-1.1 -WOPort 20000 -WOHttpAllowHost localhost

9: Connect to the server
========================

In a browser, type

	http://localhost/OpenGroupware

===

--
Alexander Lamb
alamb@mac.com

On Apr 21, 2006, at 6:50 AM, Alexander Lamb wrote:

> Hello,
>
> I am in the middle of it. Currently writing a little summary.
> If you can "give" me half a day, I will post some explanation (I  
> didn't have time to go through the whole install yet).
>
> Alex
> --
> Alexander Lamb
> alamb@mac.com
>
>
>
> On Apr 20, 2006, at 9:51 PM, Peter Schraufstetter wrote:
>
>
>> Hi folks,
>>
>> has anybody here setup OGo on Mac OS X (Tiger)?
>> I tried to install it but i am getting errors during the  
>> installation when compiling SOPE during the "make install" .
>>
>> Here are the last lines of my terminal output:
>>
>> make[3]: *** [internal-bundle-install_] Error 1
>> make[2]: *** [libxmlSAXDriver.install.bundle.variables] Error 2
>> make[1]: *** [internal-install] Error 2
>> make: *** [internal-install] Error 2
>>
>> I have no idea what goes wrong.
>>
>> Thanx
>> Peter
>> -- 
>> OpenGroupware.org Users
>> users@opengroupware.org
>> http://mail.opengroupware.org/mailman/listinfo/users
>>
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>

--
Alexander Lamb
alamb@mac.com