From users@opengroupware.org  Thu Apr  1 00:21:58 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Wed, 31 Mar 2004 18:21:58 -0500
Subject: [OGo-Users] Bad Gateway! or invalid ELF header ERROR
In-Reply-To: <200403311756.35227.chris123@magma.ca>
References: <406B2DDC.2050706@gonsman.com> <200403311756.35227.chris123@magma.ca>
Message-ID: <200403311821.58383.chris123@magma.ca>

On March 31, 2004 05:56 pm, Chris Herrnberger wrote:

Once confirmed you have two options to get OGo onto your server.

Befor you do however, it is strongly recommended that the following articles 
before starting the exercise.

Read the necessary docs;
-------------------------------------------
RedHat OGo HowTo: http://sukka.jct.ac.il/~yedidia/ogo_rh.html
General Install HowTo: http://opengroupware.org/en/install/index.html

Getting the software;
--------------------------------
1. You can use Kelly G's install script that will download and install all 
required components automatically.
http://www.toasterz.com/ogo/index.html
2. You can do it manually (See HowTo's above)

System Configuration Requirements
-----------------------------------------------------------
Re-read the RH Install Howto and pay particular attention to setting up the 
database and setting up apache with appropriate module. 

If you get stuck, post to the list, but please provide details and make the 
questions specific to one item at a time.

Best of luck

/ch


From users@opengroupware.org  Thu Apr  1 00:25:25 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 01:25:25 +0200
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <1080767912.7727.4.camel@jselfpc>
References: <1080766139.7727.1.camel@jselfpc> <6816BABF-8356-11D8-AFC5-00039340AF4A@opengroupware.org> <1080767912.7727.4.camel@jselfpc>
Message-ID: <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org>

On 31.03.2004, at 23:18, Jeff Self wrote:
> Thanks for the docs. But how do I set up the ZideStore? Is there
> anything that needs to be added to Apache? Can you point me in the 
> right
> direction for that?

The installation is pretty similiar to the OGo WebUI. Add a section 
like this to your Apache config:
---snip---
  <LocationMatch "^/zidestore/*">
  SetHandler ngobjweb-adaptor
  SetAppPort 23000
  </LocationMatch>
---snap---

And make sure your ZideStore is running on port 23000:
---snip---
Defaults write ZideStore WOPort 23000
---snap---

This should do.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 00:26:52 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 01:26:52 +0200
Subject: [OGo-Users] Anyone have Mozilla Calendar working with ZideStore?
In-Reply-To: <023801c411f9$a6bd01b0$e910bf83@zoolander>
References: <023801c411f9$a6bd01b0$e910bf83@zoolander>
Message-ID: <E3F7C231-836A-11D8-8469-000393C29C2A@opengroupware.org>

On 25.03.2004, at 00:42, Joshua McClintock wrote:
> I keep getting this from the OGO server...
>
> The host and password are blacked out..
>
> I know I have meetings in my calendar as they show up just fine in the 
> Web interface.

You might want to try the Overview calendar or mark your appointments 
read only. See that link for some information on available URLs:
     http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 00:28:44 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 01:28:44 +0200
Subject: [OGo-Users] Compiling ngobjweb module with Fedora
In-Reply-To: <loom.20040325T233840-203@post.gmane.org>
References: <loom.20040325T233840-203@post.gmane.org>
Message-ID: <26BC8ADF-836B-11D8-8469-000393C29C2A@opengroupware.org>

On 25.03.2004, at 23:45, Giuseppe Andronico wrote:
> under Fedora there is a problem compiling the ngobjweb module. I saw 
> that the problem is the path to the include file of apr-devel that, in 
> Fedora, are in /usr/include/apr-0/ instead that in /usr/include/.

Could you please create a bugreport with the details in Bugzilla:
   http://bugzilla.opengroupware.org/

Thanks a lot,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 00:32:49 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 01:32:49 +0200
Subject: [OGo-Users] Team calendar empty?!
In-Reply-To: <4069B036.6080607@avc.de>
References: <4069B036.6080607@avc.de>
Message-ID: <B8DF60F7-836B-11D8-8469-000393C29C2A@opengroupware.org>

On 30.03.2004, at 19:36, Christian Nayda wrote:
> When using OpenGrouware with the webUI everything seems to work, but 
> when we try to use another client like Mozilla Calendar or Apple iCal 
> for reading, our Team-Calender seems to be empty (at least thats what 
> Mozilla/iCal says. The personal calender does work! I found the 
> following thread but thats not our solution. The calendar file is 
> there but the file is empty?

Did you read and understood whats written here:
   http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs
?

Note that a "team calendar" (its actually just a query on a single 
calendar containing all items) in the Web interface relates to the 
Overview calendars.
The regular "team calendar" in ZideStore is bound to the 
read-access-group of an appointment.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 00:48:36 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Wed, 31 Mar 2004 18:48:36 -0500
Subject: [OGo-Users] Bad Gateway! or invalid ELF header ERROR
In-Reply-To: <200403311756.35227.chris123@magma.ca>
References: <406B2DDC.2050706@gonsman.com> <200403311756.35227.chris123@magma.ca>
Message-ID: <406B58D4.1060308@gonsman.com>

what is a "vanilla" redhat.  There are so many options to install from 
the CD. 

>1. Install a vanilla redhat 9.0
>  
>
-- 

Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Thu Apr  1 00:48:58 2004
From: users@opengroupware.org (T Reaves)
Date: Wed, 31 Mar 2004 18:48:58 -0500
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org>
References: <1080766139.7727.1.camel@jselfpc> <6816BABF-8356-11D8-AFC5-00039340AF4A@opengroupware.org> <1080767912.7727.4.camel@jselfpc> <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <FA7EE1FF-836D-11D8-A572-000A95981632@silverfieldstech.com>

When I configure ZideStore this way, then connect, I get the following. 
  ZideStore crashes and is then no longer running.  Any ideas?


Mar 31 20:00:01 ZideStore [14890]: WARNING(-[NSBundle principalClass]): 
principal class <class OGoRawDatabaseModule> of bundle <NGBundle 
0x84c633c fullPath: 
/opt/opengroupware.org/Library/OpenGroupware.org/OGoRawDatabase.ds 
infoDictionary: 0x84c8464 loaded=yes> is not a class of the bundle !
Mar 31 20:00:01 ZideStore [14890]: <|Rq:GET 0x0843D8B4|>D did not find 
'fr-fr' in map: to, tr, ts, tt, ug, tw, co, da, uk, cs, de, ur, cy, vi, 
uz, es-es, vo, ja-jp, en-us, dz, el, en, eo, fa, es, et, eu, wo, fi, 
fj, xh, fo, ga, fr, gd, fy, gl, gn, yi, ha, gu, he, yo, za, hi, no-no, 
zh, ia, hr, id, hu, ie, hy, ik, zu, in, ja, is, it, iu, iw, ji, da-dk, 
ka, jw, kk, kl, km, kn, ko, la, ks, ku, ky, ln, lo, lt, lv, nl-nl, mg, 
de-at, mi, fi-fi, mk, ml, mn, mo, na, mr, ms, mt, ne, __doc__, my, nl, 
de-ch, no, oc, de-de, om, sv-se, pa, or, pl, pt-pt, ps, pt, it-it, qu, 
aa, ab, rm, rn, af, ro, sa, sd, ru, am, sg, rw, sh, si, ba, ar, sk, as, 
sl, sm, be, sn, so, bg, bh, ta, sq, ay, bi, sr, az, ss, es-cl, st, te, 
su, pt-br, sv, bn, tg, sw, bo, th, ti, ca, br, tk, tl, tn
Mar 31 20:00:01 ZideStore [14890]: <|Rq:GET 0x0843D8B4|>D did not find 
'ko-kr' in map: to, tr, ts, tt, ug, tw, co, da, uk, cs, de, ur, cy, vi, 
uz, es-es, vo, ja-jp, en-us, dz, el, en, eo, fa, es, et, eu, wo, fi, 
fj, xh, fo, ga, fr, gd, fy, gl, gn, yi, ha, gu, he, yo, za, hi, no-no, 
zh, ia, hr, id, hu, ie, hy, ik, zu, in, ja, is, it, iu, iw, ji, da-dk, 
ka, jw, kk, kl, km, kn, ko, la, ks, ku, ky, ln, lo, lt, lv, nl-nl, mg, 
de-at, mi, fi-fi, mk, ml, mn, mo, na, mr, ms, mt, ne, __doc__, my, nl, 
de-ch, no, oc, de-de, om, sv-se, pa, or, pl, pt-pt, ps, pt, it-it, qu, 
aa, ab, rm, rn, af, ro, sa, sd, ru, am, sg, rw, sh, si, ba, ar, sk, as, 
sl, sm, be, sn, so, bg, bh, ta, sq, ay, bi, sr, az, ss, es-cl, st, te, 
su, pt-br, sv, bn, tg, sw, bo, th, ti, ca, br, tk, tl, tn
Mar 31 20:00:01 ZideStore [14890]: -[SaxXMLReaderFactory 
_loadAvailableBundles]: no XML parser could be found ...
Mar 31 20:00:01 ZideStore [14890]: -[DOMBuilderFactory 
createDOMBuilderForMimeType:]:89: could not create DOM builder for MIME 
type 'text/xml' because no SAX proper reader could be constructed.
Mar 31 20:00:01 ZideStore [14890]: Assertion failed in file 
WOxTemplateBuilder.m, line 126, method buildTemplateAtURL::
Mar 31 20:00:01 ZideStore [14890]: missing XML parser ..
EXCEPTION: (Exception name:<nil> class:AssertException reason:missing 
XML parser .. info:<nil>)


On Mar 31, 2004, at 6:25 PM, Helge Hess wrote:

> On 31.03.2004, at 23:18, Jeff Self wrote:
>> Thanks for the docs. But how do I set up the ZideStore? Is there
>> anything that needs to be added to Apache? Can you point me in the 
>> right
>> direction for that?
>
> The installation is pretty similiar to the OGo WebUI. Add a section 
> like this to your Apache config:
> ---snip---
>  <LocationMatch "^/zidestore/*">
>  SetHandler ngobjweb-adaptor
>  SetAppPort 23000
>  </LocationMatch>
> ---snap---
>
> And make sure your ZideStore is running on port 23000:
> ---snip---
> Defaults write ZideStore WOPort 23000
> ---snap---
>
> This should do.
>
> Greets
>   Helge
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users


From users@opengroupware.org  Thu Apr  1 00:56:12 2004
From: users@opengroupware.org (T Reaves)
Date: Wed, 31 Mar 2004 18:56:12 -0500
Subject: [OGo-Users] Problems with IMAP [Filters]
Message-ID: <FD754B88-836E-11D8-A572-000A95981632@silverfieldstech.com>

	Hello all.  I've just installed the latest build on my SuSE 8.2 box.  
OpenGroupware seems to run fine, but I'm having some difficulty with 
IMAP and would like some help.  I've tried searching the mailing list 
to no avail.

1) When I create a filter, why is there a password box?

2) When I add a filer, I get an error about no password.  So I put in 
my password, but then get an error still.  If I then logout and then 
back in, the filter is there.

3) Ditto for deleting or changing a filter.

4) The filters do not filter.

I'd really appreciate some help.  Thanks!


From users@opengroupware.org  Thu Apr  1 01:36:59 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Wed, 31 Mar 2004 19:36:59 -0500
Subject: [OGo-Users] Bad Gateway! or invalid ELF header ERROR
In-Reply-To: <406B58D4.1060308@gonsman.com>
References: <406B2DDC.2050706@gonsman.com> <200403311756.35227.chris123@magma.ca> <406B58D4.1060308@gonsman.com>
Message-ID: <200403311936.59544.chris123@magma.ca>

On March 31, 2004 06:48 pm, Sean Gonsman wrote:
> what is a "vanilla" redhat.  There are so many options to install from
> the CD.
>

Err..Houston..... we have a problem..:)

Install RH9, select any option is really does not matter. Last I remember 
(since I dont use rh since 6.2) there was a workstation default install or 
something similar. 

Just feed it the discs and setup the network so that you have access to the 
net. Once done, we can take if from there.

/ch


From users@opengroupware.org  Thu Apr  1 01:40:47 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Wed, 31 Mar 2004 19:40:47 -0500
Subject: [OGo-Users] Bad Gateway! or invalid ELF header ERROR
In-Reply-To: <200403311936.59544.chris123@magma.ca>
References: <406B2DDC.2050706@gonsman.com> <200403311756.35227.chris123@magma.ca> <406B58D4.1060308@gonsman.com> <200403311936.59544.chris123@magma.ca>
Message-ID: <406B650F.9090509@gonsman.com>

I have followed your advise with the workstation install.  It should be 
done in about 30 minutes.  What's next?  There will be no Apache or 
PostgreSQL or any server related software.

-Sean

>there was a workstation default install or something similar. 
>
>Just feed it the discs and setup the network so that you have access to the 
>net. Once done, we can take if from there.
>
-- 

Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Thu Apr  1 03:20:09 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 04:20:09 +0200
Subject: [OGo-Users] How many users can OGo support?
In-Reply-To: <1080766890.4467.20.camel@kanwar>
References: <1080766890.4467.20.camel@kanwar>
Message-ID: <1903DE74-8383-11D8-8469-000393C29C2A@opengroupware.org>

On 31.03.2004, at 23:01, M3 Freak wrote:
> I've seen this mentioned in the mailing list before, but I've had a 
> hard
> time trying to find the relevant threads on this topic.  So, please
> excuse me for asking again.

Well, since this is such a common question, I put my answers to your 
questions on docs.ogo, I hope you don't mind that I took your questions 
;-)

http://docs.opengroupware.org/Members/helge/numberofusers

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 03:43:46 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 04:43:46 +0200
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <FA7EE1FF-836D-11D8-A572-000A95981632@silverfieldstech.com>
References: <1080766139.7727.1.camel@jselfpc> <6816BABF-8356-11D8-AFC5-00039340AF4A@opengroupware.org> <1080767912.7727.4.camel@jselfpc> <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org> <FA7EE1FF-836D-11D8-A572-000A95981632@silverfieldstech.com>
Message-ID: <65C1A4D7-8386-11D8-8469-000393C29C2A@opengroupware.org>

On 01.04.2004, at 01:48, T Reaves wrote:
> When I configure ZideStore this way, then connect, I get the 
> following.  ZideStore crashes and is then no longer running.  Any 
> ideas?
...
> Mar 31 20:00:01 ZideStore [14890]: WARNING(-[NSBundle 
> principalClass]): principal class <class OGoRawDatabaseModule> of 
> bundle <NGBundle 0x84c633c fullPath: 
> /opt/opengroupware.org/Library/OpenGroupware.org/OGoRawDatabase.ds 
> infoDictionary: 0x84c8464 loaded=yes> is not a class of the bundle !

Hm, this should be investigated. Feel free to post a bug.

> Mar 31 20:00:01 ZideStore [14890]: <|Rq:GET 0x0843D8B4|>D did not find 
> 'fr-fr' in map:
...

Fixed in CVS, but you can ignore that (though it is annoying, I know 
;-).

> Mar 31 20:00:01 ZideStore [14890]: -[SaxXMLReaderFactory 
> _loadAvailableBundles]: no XML parser could be found ...

This is critical, it says that your installation is broken ;-) You 
should have an XML driver (usually libxmlSaxDriver) in 
Library/SaxDrivers.
Apparently you do not have that.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 03:46:39 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 04:46:39 +0200
Subject: [OGo-Users] Problems with IMAP [Filters]
In-Reply-To: <FD754B88-836E-11D8-A572-000A95981632@silverfieldstech.com>
References: <FD754B88-836E-11D8-A572-000A95981632@silverfieldstech.com>
Message-ID: <CCEFDAC6-8386-11D8-8469-000393C29C2A@opengroupware.org>

On 01.04.2004, at 01:56, T Reaves wrote:
> 1) When I create a filter, why is there a password box?

Well, because you need a password to install a filter on the Cyrus 
server. It goes away if you choose to store passwords in the login 
panel.

> 2) When I add a filer, I get an error about no password.  So I put in 
> my password, but then get an error still.  If I then logout and then 
> back in, the filter is there.

You need to distinguish between storing your filter in OGo and 
publishing your filters (as Sieve scripts) in Cyrus.
So your filter is there, but probably not published in Cyrus.

> 4) The filters do not filter.

Exactly ;-)

> I'd really appreciate some help.  Thanks!

Check the logs for ERROR. Look for "sky_install_sieve" errors, this is 
the tool used to publish OGo filters to Cyrus.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 13:31:53 2004
From: users@opengroupware.org (Christian Nayda)
Date: Thu, 01 Apr 2004 14:31:53 +0200
Subject: [OGo-Users] Team calendar empty?!
Message-ID: <406C0BB9.2070409@avc.de>

Hello,

we´re trying to get OpenGroupware/Zidestore running for our needs! When
using OpenGrouware with the webUI everything seems to work, but when we
try to use another client like Mozilla Calendar or Apple iCal for
reading, our Team-Calendar seems to be empty (at least thats what
Mozilla/iCal says. The personal calender does work! I found the
following thread but thats not our solution. The calendar file is there
but the file is empty?
http://mail.opengroupware.org/pipermail/users/2004-March/008650.html

Regards
Christan


From users@opengroupware.org  Thu Apr  1 15:40:05 2004
From: users@opengroupware.org (Jeff Self)
Date: Thu, 01 Apr 2004 09:40:05 -0500
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <1080767817.9991.14.camel@localhost.localdomain>
References: <1080766139.7727.1.camel@jselfpc>
 <1080767817.9991.14.camel@localhost.localdomain>
Message-ID: <1080830404.10328.0.camel@jselfpc>

On Wed, 2004-03-31 at 16:16, Adam Tauno Williams wrote:
> > I can't seem to find any documentation.
> > My OpenGroupware is running on a Debian GNU/Linux system. I can access
> > it through the web but I want to try out iCal with it.
> 
> Point your browser at zidestore and you'll be presented with a clickable
> webdav link for apple's ical thingy.

So do I need WebDav running on Apache?

-- 
Jeff Self
Dept. of Information Technology
City of Newport News
757-926-3741


From users@opengroupware.org  Thu Apr  1 14:57:56 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Thu,  1 Apr 2004 08:57:56 -0500
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <1080830404.10328.0.camel@jselfpc>
References: <1080766139.7727.1.camel@jselfpc>  <1080767817.9991.14.camel@localhost.localdomain> <1080830404.10328.0.camel@jselfpc>
Message-ID: <1080827876.406c1fe43474a@www.mormail.com>

> > > I can't seem to find any documentation.
> > > My OpenGroupware is running on a Debian GNU/Linux system. I can access
> > > it through the web but I want to try out iCal with it.
> > Point your browser at zidestore and you'll be presented with a clickable
> > webdav link for apple's ical thingy.
> So do I need WebDav running on Apache?

No, ZideStore is a webdav server.

PLEASE, see the documentation.

ftp://ftp.kalamazoolinux.org/pub/pdf/ogo-2003.pdf

From users@opengroupware.org  Thu Apr  1 16:00:40 2004
From: users@opengroupware.org (Jeff Self)
Date: Thu, 01 Apr 2004 10:00:40 -0500
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org>
References: <1080766139.7727.1.camel@jselfpc>
 <6816BABF-8356-11D8-AFC5-00039340AF4A@opengroupware.org>
 <1080767912.7727.4.camel@jselfpc>
 <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <1080831640.10328.12.camel@jselfpc>

On Wed, 2004-03-31 at 18:25, Helge Hess wrote:
> On 31.03.2004, at 23:18, Jeff Self wrote:
> > Thanks for the docs. But how do I set up the ZideStore? Is there
> > anything that needs to be added to Apache? Can you point me in the 
> > right
> > direction for that?
> 
> The installation is pretty similiar to the OGo WebUI. Add a section 
> like this to your Apache config:
> ---snip---
>   <LocationMatch "^/zidestore/*">
>   SetHandler ngobjweb-adaptor
>   SetAppPort 23000
>   </LocationMatch>
> ---snap---
> 
> And make sure your ZideStore is running on port 23000:
> ---snip---
> Defaults write ZideStore WOPort 23000
> ---snap---
> 

OK. I've done all that. Now when I go into iCal and try to subscribe to
a Calendar, I enter http://ogoserver/zidestore/so/jself/Calendar/
. It looks for it but then I get the following error in iCal:
Error : Calendar could not be downloaded. The server is unavailable and
returned an error(500). 

I tried it with port 23000 in the URL as well and it gave me the
following error:
Error : Calendar could not be downloaded. Connection was refused by
host.

 I restarted Apache after I entered the ZideStore info. Do I need to do
anything else? It seems like the ZideStore isn't running on port 23000.
I tried connecting from a browser as well.

-- 
Jeff Self
Dept. of Information Technology
City of Newport News
757-926-3741


From users@opengroupware.org  Thu Apr  1 16:12:49 2004
From: users@opengroupware.org (AragonX)
Date: Thu, 1 Apr 2004 10:12:49 -0500 (EST)
Subject: [OGo-Users] Proper way to run nhsd
Message-ID: <1198.24.27.185.153.1080832369.squirrel@dcsnow.com>

Hello all,

I am moving on to the Palm sync portion of my documentation. 
Unfortunately, I have not gotten nhsd to run.  I installed the RPMs (I
believe correctly) but I don't believe it installed an init script for
nhsd.  If I try to run it from the CLI I get a bunch of errors.  It's
probably expecting a config file or something.  Can someone help me out?

I search the archives and found a good install guide but it doesn't cover
nhsd installation and configuration much.  It's got everything else that I
need (I think).

Sorry to be a bother.


From users@opengroupware.org  Thu Apr  1 15:13:44 2004
From: users@opengroupware.org (Florent Manens)
Date: Thu, 01 Apr 2004 14:13:44 +0000
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <1080831640.10328.12.camel@jselfpc>
References: <1080766139.7727.1.camel@jselfpc>	 <6816BABF-8356-11D8-AFC5-00039340AF4A@opengroupware.org>	 <1080767912.7727.4.camel@jselfpc>	 <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org> <1080831640.10328.12.camel@jselfpc>
Message-ID: <406C2398.2070202@starxpert.fr>

Jeff Self a écrit :
> OK. I've done all that. Now when I go into iCal and try to subscribe to
> a Calendar, I enter http://ogoserver/zidestore/so/jself/Calendar/

You should try this :
http://ogoserver/zidestore/so/jself/Calendar/calendar.ics

-- 
Florent Manens
www.starxpert.fr

From users@opengroupware.org  Thu Apr  1 16:20:08 2004
From: users@opengroupware.org (Jeff Self)
Date: Thu, 01 Apr 2004 10:20:08 -0500
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <1080827876.406c1fe43474a@www.mormail.com>
References: <1080766139.7727.1.camel@jselfpc>
 <1080767817.9991.14.camel@localhost.localdomain>
 <1080830404.10328.0.camel@jselfpc>
 <1080827876.406c1fe43474a@www.mormail.com>
Message-ID: <1080832808.10328.21.camel@jselfpc>

On Thu, 2004-04-01 at 08:57, Adam Tauno Williams wrote:
> > > > I can't seem to find any documentation.
> > > > My OpenGroupware is running on a Debian GNU/Linux system. I can access
> > > > it through the web but I want to try out iCal with it.
> > > Point your browser at zidestore and you'll be presented with a clickable
> > > webdav link for apple's ical thingy.
> > So do I need WebDav running on Apache?
> 
> No, ZideStore is a webdav server.
> 
> PLEASE, see the documentation.
> 
> ftp://ftp.kalamazoolinux.org/pub/pdf/ogo-2003.pdf

Thanks. Thats what I was looking for. But now when I enter the URL in
iCal, it asks me for my username and password. I enter that but then get
an error saying the downloaded data is not valid.

-- 
Jeff Self
Dept. of Information Technology
City of Newport News
757-926-3741


From users@opengroupware.org  Thu Apr  1 16:32:17 2004
From: users@opengroupware.org (Jeff Self)
Date: Thu, 01 Apr 2004 10:32:17 -0500
Subject: [OGo-Users] How do I connect to OpenGroupware with OS X's iCal?
In-Reply-To: <406C2398.2070202@starxpert.fr>
References: <1080766139.7727.1.camel@jselfpc>
 <6816BABF-8356-11D8-AFC5-00039340AF4A@opengroupware.org>
 <1080767912.7727.4.camel@jselfpc>
 <B0272790-836A-11D8-8469-000393C29C2A@opengroupware.org>
 <1080831640.10328.12.camel@jselfpc>  <406C2398.2070202@starxpert.fr>
Message-ID: <1080833537.10328.24.camel@jselfpc>

On Thu, 2004-04-01 at 09:13, Florent Manens wrote:
> Jeff Self a =E9crit :
> > OK. I've done all that. Now when I go into iCal and try to subscribe to
> > a Calendar, I enter http://ogoserver/zidestore/so/jself/Calendar/
>=20
> You should try this :
> http://ogoserver/zidestore/so/jself/Calendar/calendar.ics
>=20

Thanks, I am now able to subscribe to my calendar. But I can't see
anything! I noticed when I created a new appointment from the WEBUI, the
appointment was set for private and their was no option to make it
public. And when I tried to create an appointment from within iCal, it
said the subscribed calendar was read-only.

--=20
Jeff Self
Dept. of Information Technology
City of Newport News
757-926-3741


From users@opengroupware.org  Thu Apr  1 09:23:08 2004
From: users@opengroupware.org (Adel Ben Zarrouk)
Date: Thu, 01 Apr 2004 08:23:08 +0000
Subject: [OGo-Users] Problem with timezone
Message-ID: <20040401082308.7FB6B3440A5@mail.opennet.ae>

Hi All
 Please about the time zone, i need your help, i'am in middle east (UAE), the
exact time here is GMT+4 , in opengroupware ,what is exactly i can configure the
time zone (MET,PST...????)

Thanks


From users@opengroupware.org  Thu Apr  1 16:40:23 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Thu,  1 Apr 2004 10:40:23 -0500
Subject: [OGo-Users] Proper way to run nhsd
In-Reply-To: <1198.24.27.185.153.1080832369.squirrel@dcsnow.com>
References: <1198.24.27.185.153.1080832369.squirrel@dcsnow.com>
Message-ID: <1080834023.406c37e7649dc@www.mormail.com>

> I am moving on to the Palm sync portion of my documentation. 
> Unfortunately, I have not gotten nhsd to run.  I installed the RPMs (I
> believe correctly) but I don't believe it installed an init script for
> nhsd.  If I try to run it from the CLI I get a bunch of errors.  It's
> probably expecting a config file or something.  Can someone help me out?

You probably didn't run it as the opengroupware user, or you didn't source the
environment.

How to start & use nhsd is covered in -
ftp://ftp.kalamazoolinux.org/pub/pdf/ogo-2003.pdf

> I search the archives and found a good install guide but it doesn't cover
> nhsd installation and configuration much.  It's got everything else that I
> need (I think).

My init script looks like

export LD_ASSUME_KERNEL=2.4.1
                                                                                
              ...
OGO_DIR=/opt/opengroupware.org
..
HSD_BIN="$OGO_DIR/Tools/ix86/linux-gnu/gnu-fd-nil/nhsd"
..
env -i su - opengroupware -c "$HSD_BIN" >> $LOG 2>&1 &

From users@opengroupware.org  Thu Apr  1 19:28:44 2004
From: users@opengroupware.org (Mike Mylonas)
Date: Fri, 02 Apr 2004 06:28:44 +1200
Subject: [OGo-Users] Client Migration
In-Reply-To: <1080771540.4467.34.camel@kanwar>
References: <1080674235.3622.24.camel@boris.dragon-is.co.nz>
 <1080771540.4467.34.camel@kanwar>
Message-ID: <1080844124.3622.1248.camel@boris.dragon-is.co.nz>

On Thu, 2004-04-01 at 10:19, M3 Freak wrote:
> Question: you realize that OGo has only a web based email client, and
> doesn't have an email server solution of it's own, right?

that part I understand ...

> If you do know this, then all you have to do is to setup an IMAP email
> folder in Outlook, and just drag and drop the emails from the local
> folders to the IMAP folders.  No ZideLook plugin required at all! BUT, I
> think you may have a problem - I believe Outlook 97 is crippled and
> can't connect to IMAP email servers.

I have heard that as well, will confirm it over the weekend

> You're going to have to consider upgrading to a newer version of
> Outlook, or moving over to another client.

Thanks for the heads up on that, and I don't forsee that moving the mail
will be a big issue. I suppose the bigger issue for me, is there anyway
to migrate information out of the Outlook calendar and into
OpenGroupware

Cheers
Mike


From users@opengroupware.org  Thu Apr  1 20:00:10 2004
From: users@opengroupware.org (Kelley G)
Date: Thu, 01 Apr 2004 12:00:10 -0700
Subject: [OGo-Users] Proper way to run nhsd
In-Reply-To: <1080834023.406c37e7649dc@www.mormail.com>
References: <1198.24.27.185.153.1080832369.squirrel@dcsnow.com> <1080834023.406c37e7649dc@www.mormail.com>
Message-ID: <406C66BA.5040306@toasterz.com>

Adam Tauno Williams wrote:

>>I am moving on to the Palm sync portion of my documentation. 
>>Unfortunately, I have not gotten nhsd to run.  I installed the RPMs (I
>>believe correctly) but I don't believe it installed an init script for
>>nhsd.  If I try to run it from the CLI I get a bunch of errors.  It's
>>probably expecting a config file or something.  Can someone help me out?
>>    
>>
>
>You probably didn't run it as the opengroupware user, or you didn't source the
>environment.
>
>How to start & use nhsd is covered in -
>ftp://ftp.kalamazoolinux.org/pub/pdf/ogo-2003.pdf
>
>  
>
>>I search the archives and found a good install guide but it doesn't cover
>>nhsd installation and configuration much.  It's got everything else that I
>>need (I think).
>>    
>>
>
>My init script looks like
>
>export LD_ASSUME_KERNEL=2.4.1
>                                                                                
>              ...
>OGO_DIR=/opt/opengroupware.org
>..
>HSD_BIN="$OGO_DIR/Tools/ix86/linux-gnu/gnu-fd-nil/nhsd"
>..
>env -i su - opengroupware -c "$HSD_BIN" >> $LOG 2>&1 &
>  
>
here's a complete init script that starts all the services
http://exchangekiller.com/docs/opengroupware
hope this helps

-- 

kelley g

oooooooooooooooooooooooooo
http://toasterz.com
http://exchangekiller.com
oooooooooooooooooooooooooo


From users@opengroupware.org  Thu Apr  1 19:59:57 2004
From: users@opengroupware.org (M3 Freak)
Date: Thu, 01 Apr 2004 13:59:57 -0500
Subject: [OGo-Users] Client Migration
In-Reply-To: <1080844124.3622.1248.camel@boris.dragon-is.co.nz>
References: <1080674235.3622.24.camel@boris.dragon-is.co.nz>
 <1080771540.4467.34.camel@kanwar>
 <1080844124.3622.1248.camel@boris.dragon-is.co.nz>
Message-ID: <1080845997.4488.170.camel@kanwar>

On Thu, 2004-04-01 at 13:28, Mike Mylonas wrote:

> > You're going to have to consider upgrading to a newer version of
> > Outlook, or moving over to another client.
> 
> Thanks for the heads up on that, and I don't forsee that moving the mail
> will be a big issue. I suppose the bigger issue for me, is there anyway
> to migrate information out of the Outlook calendar and into
> OpenGroupware

Dragging and dropping contacts works great, but can be slow. Run a
search in the list for "ogo migration".  You should find a thread I
started about our experience with migrating a client's contacts and
email information from Outlook into OGo/ZideStore.

Other than that, you should have a fairly painless experience moving the
contacts into OGo.

We didn't move their calendar info, though.  It wasn't because of a
problem we encountered - it just wasn't done.  We're hoping to test that
soon, but again, I don't foresee any problems (I could be completely
wrong!).

Regards,

Kanwar
Systems Aligned Inc.
www.systemsaligned.com


From users@opengroupware.org  Thu Apr  1 22:29:56 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 1 Apr 2004 23:29:56 +0200
Subject: [OGo-Users] Client Migration
In-Reply-To: <1080845997.4488.170.camel@kanwar>
References: <1080674235.3622.24.camel@boris.dragon-is.co.nz> <1080771540.4467.34.camel@kanwar> <1080844124.3622.1248.camel@boris.dragon-is.co.nz> <1080845997.4488.170.camel@kanwar>
Message-ID: <B8EE8ED4-8423-11D8-AFC5-00039340AF4A@opengroupware.org>

On 01.04.2004, at 20:59, M3 Freak wrote:
> Dragging and dropping contacts works great, but can be slow. Run a
> search in the list for "ogo migration".  You should find a thread I
> started about our experience with migrating a client's contacts and
> email information from Outlook into OGo/ZideStore.
>
> Other than that, you should have a fairly painless experience moving 
> the
> contacts into OGo.

Hi Kanwar, maybe you could set up a small page on that experience on 
the docs site? Would be better for reference than just "look into the 
archives" ;-)

Thanks a lot,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Thu Apr  1 23:03:39 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Thu, 1 Apr 2004 17:03:39 -0500
Subject: [OGo-Users] OOo & OGo Addressbook integration
Message-ID: <200404011703.39026.chris123@magma.ca>

Greets:

Was wondering if anyone has explored the integration of OOo AddressBook 
connectivity via db functionality see>Tools>DataSource>Database_Type/(for 
available native connectors) and OGo. 

Any ideas on how this could be accomplished? The only option i am aware of is 
via the postgresql driver for OOo but this is not recommended, to access the 
OGo db in this manner. 

All contacts are available however via zidestore/so/<username>Contacts/*.vcf 
and as OOo supports webdav natively, that is via the open dialogue, one can 
browse the entire tree made available by zidestore, the question remains how 
to connect this with OOo addressbook mechanism?

Just an idea..:)

/ch

From users@opengroupware.org  Thu Apr  1 22:02:44 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Thu,  1 Apr 2004 16:02:44 -0500
Subject: [OGo-Users] OOo & OGo Addressbook integration
In-Reply-To: <200404011703.39026.chris123@magma.ca>
References: <200404011703.39026.chris123@magma.ca>
Message-ID: <1080853364.406c837463a9a@www.mormail.com>

> Was wondering if anyone has explored the integration of OOo AddressBook 
> connectivity via db functionality see>Tools>DataSource>Database_Type/(for 
> available native connectors) and OGo. 
> Any ideas on how this could be accomplished? The only option i am aware of is
> via the postgresql driver for OOo but this is not recommended, to access the
> OGo db in this manner. 
> All contacts are available however via zidestore/so/<username>Contacts/*.vcf 
> and as OOo supports webdav natively, that is via the open dialogue, one can 
> browse the entire tree made available by zidestore, the question remains how
> to connect this with OOo addressbook mechanism?
> Just an idea..:)

The ximianized OOo integrates with the evolution addressbook, so *theoretically*
if the ogo-evo plugin is installed on a Linux desktop the address book should
be available.  And E-D-S in GNOME 2.6.x should make this work even better (once
the evo-ogo plugin supports that API anyway).  

That doesn't do Windows users and good however (really breaks my heart to be the
platform with the leg-up for a change ;).

OO supports LDAP on every platform so there is my back-sql hack, but thats only
read only.

Can one extend the addressbook sources via UNO?  Thats an interesting question.

From users@opengroupware.org  Thu Apr  1 23:21:44 2004
From: users@opengroupware.org (Grahame Cooper)
Date: Thu, 01 Apr 2004 23:21:44 +0100
Subject: [OGo-Users] Image Problems (again ... sorry)
Message-ID: <406C95F8.8000301@salford.ac.uk>

This is a multi-part message in MIME format.
--------------020907000609090006020008
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi

I am having the problem that has been reported so many times, but I am
tearing my hair out now.

Using Mandrake 9.2 with OGo from the Mandrake RPMs.

I can access the ogo server and navigate the various pages (User,
Manager, News, etc.), but the images are all missing.

I have read the FAQ and tried symlinking the image directory in several
locations (the first is the real one):

/usr/lib/opengroupware.org/WebServerResources/English.lproj
/usr/lib/opengroupware.org/OpenGroupware.woa/WebServerResources/English.lproj
/usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/WebServerResources/English.lproj
/usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/English.lproj
/usr/lib/opengroupware.org/WOApps/English.lproj
/usr/lib/opengroupware.org/WOApps/WebServerResources/English.lproj

With all of these symlinks in place, it still doesn't work.

In the web page, the links to the images are:

http://hostname:port/OpenGroupware.woa/WebServerResources/English.lproj/imagename.gif

Log messages are all of the form:

Apr 02 00:04:09 OpenGroupware [25417]: <0x084395A4[WOHttpTransaction]>
ERROR: got no response for request <WORequest[0x083E41CC]: method=GET
uri=/OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif
app=OpenGroupware rqKey=WebServerResources rqPath=English.lproj/tab_.gif> ..
clienthostname - - [02/Apr/2004:00:04:09 GMT] "GET
/OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif HTTP/1.1"
500 0 0.0
10 - - 0

What am I doing wrong? Does anyone have any ideas?

Thanks,

Grahame
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFAbJXFqa5Q84ryhtkRAhzBAJ9t6dmoD6I2c8ccRe1K+z/jxT+bugCg1sT7
meLFlFY0CHClfPQYNgDtluc=
=K02G
-----END PGP SIGNATURE-----

--------------020907000609090006020008
Content-Type: text/x-vcard; charset=utf8;
 name="G.S.Cooper.vcf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="G.S.Cooper.vcf"

begin:vcard
fn:Grahame Cooper
n:Cooper;Grahame
org:University of Salford;Information Systems Institute
adr:;;The Crescent;Salford;Greater Manchester;M5 4WT;England
email;internet:G.S.Cooper@Salford.ac.uk
title:Professor Grahame Cooper
tel;work:+44 161 295 5759
tel;fax:+44 161 745 8169
x-mozilla-html:FALSE
url:http://www.isi.salford.ac.uk/staff/gsc/
version:2.1
end:vcard


--------------020907000609090006020008--

From users@opengroupware.org  Thu Apr  1 23:39:40 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Thu, 1 Apr 2004 17:39:40 -0500
Subject: [OGo-Users] OOo & OGo Addressbook integration
In-Reply-To: <1080853364.406c837463a9a@www.mormail.com>
References: <200404011703.39026.chris123@magma.ca> <1080853364.406c837463a9a@www.mormail.com>
Message-ID: <200404011739.40684.chris123@magma.ca>

On April 1, 2004 04:02 pm, Adam Tauno Williams wrote:

> The ximianized OOo integrates with the evolution addressbook, so
> *theoretically* if the ogo-evo plugin is installed on a Linux desktop the
> address book should be available.  And E-D-S in GNOME 2.6.x should make
> this work even better (once the evo-ogo plugin supports that API anyway).

Ok.interesting. It goes something like this then

XimainOOo><Evo-connector><Evo><Evo-ogo connector><OGo><connector><postgesql
<--------stable------------------------------><-------beta-----------><----------stable-------------------->

Rather a round robin route with many dependencies but in theory (if all 
components are available) its doable.

> That doesn't do Windows users and good however (really breaks my heart to
> be the platform with the leg-up for a change ;).

I would like to be smug and say, "Who gives a c**p" however this is currently 
a potential revenue maker for many, so I will be nice..:)

Similarily, removing Outlook from windows users is like caffeine withdrawl. 
Ugly and scarry...hence the zidelook pluggin..:)

> OO supports LDAP on every platform so there is my back-sql hack, but thats
> only read only.

Hmm..need to read up on this. Where is the back-sql hack to be found. 

> Can one extend the addressbook sources via UNO?  Thats an interesting
> question.

Perhaps with the pyUno bridge and xml-rpc as both OOo and OGo are XML-RPC 
aware, and with python as the scripting language but again not a question for 
this list presently. It would them be a matter of writing an OOo macro that 
pulls all the data into a spreadsheet or alternative and then linking the 
spreadsheet to the db mechanism from which OOo pulls its addresses data. Will 
followup on the OOo lists. 

many tks

/ch




From users@opengroupware.org  Thu Apr  1 23:35:28 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 2 Apr 2004 00:35:28 +0200
Subject: [OGo-Users] OOo & OGo Addressbook integration
In-Reply-To: <1080853364.406c837463a9a@www.mormail.com>
References: <200404011703.39026.chris123@magma.ca> <1080853364.406c837463a9a@www.mormail.com>
Message-ID: <E05B45D3-842C-11D8-AFC5-00039340AF4A@opengroupware.org>

On 01.04.2004, at 23:02, Adam Tauno Williams wrote:
> That doesn't do Windows users and good however (really breaks my heart 
> to be the platform with the leg-up for a change ;).

Well, on Windows I would guess that the OOo AB can access the MAPI 
addressbook or the Mozilla AB, which in turn AFAIK can access the MAPI 
AB.
So all this _might_ work with ZideLook (no support or tests for such 
constructs ;-).

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Fri Apr  2 00:55:59 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Thu, 1 Apr 2004 18:55:59 -0500
Subject: [OGo-Users] OOo & OGo Addressbook integration
In-Reply-To: <E05B45D3-842C-11D8-AFC5-00039340AF4A@opengroupware.org>
References: <200404011703.39026.chris123@magma.ca> <1080853364.406c837463a9a@www.mormail.com> <E05B45D3-842C-11D8-AFC5-00039340AF4A@opengroupware.org>
Message-ID: <200404011855.59878.chris123@magma.ca>

On April 1, 2004 05:35 pm, Helge Hess wrote:
> On 01.04.2004, at 23:02, Adam Tauno Williams wrote:
> > That doesn't do Windows users and good however (really breaks my heart
> > to be the platform with the leg-up for a change ;).
>
> Well, on Windows I would guess that the OOo AB can access the MAPI
> addressbook or the Mozilla AB, which in turn AFAIK can access the MAPI
> AB.
> So all this _might_ work with ZideLook (no support or tests for such
> constructs ;-).

Yup just checked it on m680. Actually, its cleaner in windows, I hate to say, 
as OOo provides an OutlookXP connector, which automagically slurps all the 
contacts from either address book (which you can select) directly into OOo. 
So as long as zidelook provides addresses into Outlook, which it does, I hate 
to say it, its seemless. Urg...:) 

Back to exploring linux, which essentially means that once the evo-connector 
is done, it will be equally seemless, via the OOo-Evo connector, which only 
leaves kde to address the same level of support. Wrt to Mac's, have no clue 
at present. 

We actually should start a section on docs detailing OOo integration with OGo 
to capitalize on the relationship. 

1. addressbook integration:  linux | windows | mac | other
2. document integration:  linux | windows | mac | other
3. anything else?

regards

/ch

From users@opengroupware.org  Fri Apr  2 04:13:29 2004
From: users@opengroupware.org (T Reaves)
Date: Thu, 1 Apr 2004 22:13:29 -0500
Subject: [OGo-Users] Problems with IMAP [Filters]
In-Reply-To: <CCEFDAC6-8386-11D8-8469-000393C29C2A@opengroupware.org>
References: <FD754B88-836E-11D8-A572-000A95981632@silverfieldstech.com> <CCEFDAC6-8386-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <B70F68C2-8453-11D8-9CC1-000A95981632@silverfieldstech.com>

	Than explained things.  Thanks

	O.K., the first issue is resolved.  I had to add an entry to my 
imap.conf file.  That is done.  Now, in SquirrelMail, I can create 
sieve filers.  But I still can not publish them from ogo.  The error is 
now:
Apr  1 23:15:16 stech timsieved[30107]: badlogin: localhost[127.0.0.1] 
PLAIN error base64 decoding string

	I do not get this error from SquirrelMail publishing, so I'm fairly 
confident about it being something related to ogo.


On Mar 31, 2004, at 9:46 PM, Helge Hess wrote:

> On 01.04.2004, at 01:56, T Reaves wrote:
>> 1) When I create a filter, why is there a password box?
>
> Well, because you need a password to install a filter on the Cyrus 
> server. It goes away if you choose to store passwords in the login 
> panel.
>
>> 2) When I add a filer, I get an error about no password.  So I put in 
>> my password, but then get an error still.  If I then logout and then 
>> back in, the filter is there.
>
> You need to distinguish between storing your filter in OGo and 
> publishing your filters (as Sieve scripts) in Cyrus.
> So your filter is there, but probably not published in Cyrus.
>
>> 4) The filters do not filter.
>
> Exactly ;-)
>
>> I'd really appreciate some help.  Thanks!
>
> Check the logs for ERROR. Look for "sky_install_sieve" errors, this is 
> the tool used to publish OGo filters to Cyrus.
>
> regards,
>   Helge


From users@opengroupware.org  Fri Apr  2 08:23:03 2004
From: users@opengroupware.org (G.S.Cooper)
Date: Fri, 02 Apr 2004 08:23:03 +0100
Subject: [OGo-Users] Image Problems (again ... sorry)
In-Reply-To: <406C95F8.8000301@salford.ac.uk>
References: <406C95F8.8000301@salford.ac.uk>
Message-ID: <406D14D7.5080304@salford.ac.uk>

This is a multi-part message in MIME format.
--------------030706040901090200060609
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Grahame Cooper wrote:
> Hi
>
> I am having the problem that has been reported so many times, but I am
> tearing my hair out now.
>
> Using Mandrake 9.2 with OGo from the Mandrake RPMs.
>
> I can access the ogo server and navigate the various pages (User,
> Manager, News, etc.), but the images are all missing.
>
> I have read the FAQ and tried symlinking the image directory in several
> locations (the first is the real one):
>
> /usr/lib/opengroupware.org/WebServerResources/English.lproj
>
/usr/lib/opengroupware.org/OpenGroupware.woa/WebServerResources/English.lproj
>
/usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/WebServerResources/English.lproj
> /usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/English.lproj
> /usr/lib/opengroupware.org/WOApps/English.lproj
> /usr/lib/opengroupware.org/WOApps/WebServerResources/English.lproj
>
> With all of these symlinks in place, it still doesn't work.
>
> In the web page, the links to the images are:
>
>
http://hostname:port/OpenGroupware.woa/WebServerResources/English.lproj/imagename.gif
>
> Log messages are all of the form:
>
> Apr 02 00:04:09 OpenGroupware [25417]: <0x084395A4[WOHttpTransaction]>
> ERROR: got no response for request <WORequest[0x083E41CC]: method=GET
> uri=/OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif
> app=OpenGroupware rqKey=WebServerResources
rqPath=English.lproj/tab_.gif> ..
> clienthostname - - [02/Apr/2004:00:04:09 GMT] "GET
> /OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif HTTP/1.1"
> 500 0 0.0
> 10 - - 0
>
> What am I doing wrong? Does anyone have any ideas?

Apologies again. I have solved it now. It was a permissions problem. I
changed the ownership of the whole opengroupware.org tree to ogo, and it
seems to work now.

Cheers,

Grahame
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFAbRTDqa5Q84ryhtkRAiKeAKDKaIRlUTvvzBCnKp8mwxjw0xJpEACg7aZ/
Gu4R0Bv/ARaugmHG5Fuft8U=
=4itZ
-----END PGP SIGNATURE-----

--------------030706040901090200060609
Content-Type: text/x-vcard; charset=utf8;
 name="G.S.Cooper.vcf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="G.S.Cooper.vcf"

begin:vcard
fn:Grahame Cooper
n:Cooper;Grahame
org:University of Salford;Information Systems Institute
adr:;;The Crescent;Salford;Greater Manchester;M5 4WT;England
email;internet:G.S.Cooper@Salford.ac.uk
title:Professor Grahame Cooper
tel;work:+44 161 295 5759
tel;fax:+44 161 745 8169
x-mozilla-html:FALSE
url:http://www.isi.salford.ac.uk/staff/gsc/
version:2.1
end:vcard


--------------030706040901090200060609--

From users@opengroupware.org  Fri Apr  2 12:34:33 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 2 Apr 2004 13:34:33 +0200
Subject: [OGo-Users] OOo & OGo Addressbook integration
In-Reply-To: <200404011855.59878.chris123@magma.ca>
References: <200404011703.39026.chris123@magma.ca> <1080853364.406c837463a9a@www.mormail.com> <E05B45D3-842C-11D8-AFC5-00039340AF4A@opengroupware.org> <200404011855.59878.chris123@magma.ca>
Message-ID: <B64C75DE-8499-11D8-90F1-000393BBAFF6@opengroupware.org>

On Apr 2, 2004, at 1:55 AM, Chris Herrnberger wrote:
> Yup just checked it on m680. Actually, its cleaner in windows, I hate 
> to say, as OOo provides an OutlookXP connector, which automagically 
> slurps all the contacts from either address book (which you can 
> select) directly into OOo.
> So as long as zidelook provides addresses into Outlook, which it does, 
> I hate to say it, its seemless. Urg...:)

It would be interesting whether that actually works with ZideLook, 
since ZideLook might not implement every MAPI property required by OOo. 
Can someone take a look?

In general it would be great to have a set of documents which show how 
OOo integrates with OGo. Indeed we should create a special "OOo/OGo 
Integration Subproject" which shows use cases.

> Back to exploring linux, which essentially means that once the 
> evo-connector is done, it will be equally seemless, via the OOo-Evo 
> connector, which only leaves kde to address the same level of support.

Some OGo specific OOo datasources would be great and would allow quite 
some interesting features.
Unfortunately for that one needs a person with a lot of OOo know how.

> Wrt to Mac's, have no clue at present.

Max Berger's work might be interesting on that front:

   http://www.opengroupware.org/en/projects/syncml/

In general MacOSX has the addressbook framework which can sync to 
Exchange via WebDAV (using iSync) and query LDAP. AFAIK it doesn't have 
a plugin mechanism for other AB services.
I don't think that OOo/OSX can access the OSX AB or provides other OSX 
specific services.

> We actually should start a section on docs detailing OOo integration 
> with OGo to capitalize on the relationship.

Exactly. Please do so! ;-)

> 1. addressbook integration:  linux | windows | mac | other
> 2. document integration:  linux | windows | mac | other
> 3. anything else?

Maybe a developer section with items we would like to have (like OGo 
datasources).

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Fri Apr  2 12:43:08 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Fri,  2 Apr 2004 06:43:08 -0500
Subject: [OGo-Users] OOo & OGo Addressbook integration
In-Reply-To: <200404011739.40684.chris123@magma.ca>
References: <200404011703.39026.chris123@magma.ca> <1080853364.406c837463a9a@www.mormail.com> <200404011739.40684.chris123@magma.ca>
Message-ID: <1080906188.406d51cc88db1@www.mormail.com>

> > The ximianized OOo integrates with the evolution addressbook, so
> > *theoretically* if the ogo-evo plugin is installed on a Linux desktop the
> > address book should be available.  And E-D-S in GNOME 2.6.x should make
> > this work even better (once the evo-ogo plugin supports that API anyway).
> Ok.interesting. It goes something like this then
> XimainOOo><Evo-connector><Evo><Evo-ogo connector><OGo><connector><postgesql
<--------stable------------------------------><-------beta-----------><----------stable-------------------->
> Rather a round robin route with many dependencies but in theory (if all 
> components are available) its doable.

The depenencies aren't really a problem, IMHO, since the vast majority of GNOME
users are going to want Evo integration with OO anyway (for the local address
book, etc...)  And e-d-s is what will be used by new version of gaim, the
calender applett, etc...  so for GNOME I'm convinced the Evo plugin is the way
to go.

I don't know where KDE stands,  but there is the blurb on the OGO site about a
KDE PIM meeting.  The only notes I've been able to find are in German.

> > That doesn't do Windows users and good however (really breaks my heart to
> > be the platform with the leg-up for a change ;).
> I would like to be smug and say, "Who gives a c**p" however this is currently
> a potential revenue maker for many, so I will be nice..:)

I understand,  I'm just revelling.  I support ~250 Windows boxes, Grrrr....

> Similarily, removing Outlook from windows users is like caffeine withdrawl. 
> Ugly and scarry...hence the zidelook pluggin..:)

> > OO supports LDAP on every platform so there is my back-sql hack, but thats
> > only read only.
> Hmm..need to read up on this. Where is the back-sql hack to be found. 

It is in the documentation plone, although I need to update it to a newer and
improved version.  But it so far has worked really well.

> > Can one extend the addressbook sources via UNO?  Thats an interesting
> > question.
> Perhaps with the pyUno bridge and xml-rpc as both OOo and OGo are XML-RPC 
> aware, and with python as the scripting language but again not a question for

There is a CLI/UNO Bridge (.Net/Mono) as well.  I haven't had a chance to tear
into it yet.

> this list presently. It would them be a matter of writing an OOo macro that 
> pulls all the data into a spreadsheet or alternative and then linking the 
> spreadsheet to the db mechanism from which OOo pulls its addresses data. Will
> followup on the OOo lists. 

From users@opengroupware.org  Fri Apr  2 15:27:13 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Fri, 2 Apr 2004 16:27:13 +0200 (CEST)
Subject: [OGo-Users] (no subject)
Message-ID: <20040402142713.75064.qmail@web25103.mail.ukl.yahoo.com>

--0-1751574310-1080916033=:74649
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

i am new in opengroup ware and i have a few problem :i install the all rpm packages for RedHat 8.0 i can run the following commands "source /opt/opengroupware.org/OpenGroupware.org.sh " but i didnt found Defaults script as described
i run locate Defaults and i found the path /opt/skyrix/Tools/ix86/linux-gnu/gnu-fd-nil/Defaults
To run the commands decribed i do this
/opt/skyrix/Tools/ix86/linux-gnu/gnu-fd-nil/Defaults writeNSGlobalDomain LSAdaptor PostgreSQL72
but i have this error 
/opt/skyrix/system/Tools/ix86/linux-gnu/gnu-fd-nil/Defaults: error while loading shared libraries: libFoundation_d.so.1.0: cannot open shared object file: No such file or directory
please could someone can help me
 
sam


		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-1751574310-1080916033=:74649
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>i am new in opengroup ware and i have a few problem :
<DIV>i install the all rpm packages for RedHat 8.0 i can run the following commands "source /opt/opengroupware.org/OpenGroupware.org.sh&nbsp;" but i didnt found Defaults script as described</DIV>
<DIV>i run locate Defaults and i found the path /opt/skyrix/Tools/ix86/linux-gnu/gnu-fd-nil/Defaults</DIV>
<DIV>To run the commands decribed i do this</DIV>
<DIV>/opt/skyrix/Tools/ix86/linux-gnu/gnu-fd-nil/Defaults writeNSGlobalDomain LSAdaptor PostgreSQL72<BR>but i have this error </DIV>
<DIV>/opt/skyrix/system/Tools/ix86/linux-gnu/gnu-fd-nil/Defaults: error while loading shared libraries: libFoundation_d.so.1.0: cannot open shared object file: No such file or directory</DIV>
<DIV>please could someone can help me</DIV>
<DIV>&nbsp;</DIV>
<DIV>sam</DIV></DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-1751574310-1080916033=:74649--

From users@opengroupware.org  Fri Apr  2 15:39:31 2004
From: users@opengroupware.org (Daniel =?ISO-8859-1?Q?Ch=E9nard?=)
Date: Fri, 02 Apr 2004 09:39:31 -0500
Subject: [OGo-Users] character set
Message-ID: <1080916770.19626.16.camel@xeyrus.unigiciel.com>

There is any plan to change and/or to add an option to change the
character set in the Ogo??

I really like this project but the character set ISO-8859-15 disturb me
and my boss.

May be a fix is on work??

Tank 

 


-- 
Daniel Chénard
 
Croesus Finansoft Inc.
2 Place Laval, Suite 510
Laval, Quebec
Canada H7N 5N6
Site Web: www.croesus.com
 
Daniel.Chenard@croesus.com
Tel: +1 450-662-6101, 145
Fax: +1 450-662-3629
 
Please Note: The Light at the End of The Tunnel
             will be turned off until further
             notice due to budget cutbacks.
                                --The Management


From users@opengroupware.org  Fri Apr  2 16:54:02 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 2 Apr 2004 17:54:02 +0200
Subject: [OGo-Users] character set
In-Reply-To: <1080916770.19626.16.camel@xeyrus.unigiciel.com>
References: <1080916770.19626.16.camel@xeyrus.unigiciel.com>
Message-ID: <F65CB660-84BD-11D8-90F1-000393BBAFF6@opengroupware.org>

On Apr 2, 2004, at 4:39 PM, Daniel Ch=E9nard wrote:
> There is any plan to change and/or to add an option to change the
> character set in the Ogo??

No, and there will never be one. Web technology deals with character=20
sets in a completely transparent way.

What we need to do is to expand the support for characters sets, but=20
this is a different topic.

> I really like this project but the character set ISO-8859-15 disturb =
me
> and my boss.

I'm not sure what disturbs you about the character set? What is your=20
exact problem?

regards,
   Helge
--=20
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Fri Apr  2 17:33:49 2004
From: users@opengroupware.org (Daniel =?ISO-8859-1?Q?Ch=E9nard?=)
Date: Fri, 02 Apr 2004 11:33:49 -0500
Subject: [OGo-Users] character set
In-Reply-To: <F65CB660-84BD-11D8-90F1-000393BBAFF6@opengroupware.org>
References: <1080916770.19626.16.camel@xeyrus.unigiciel.com>
 <F65CB660-84BD-11D8-90F1-000393BBAFF6@opengroupware.org>
Message-ID: <1080923628.19626.25.camel@xeyrus.unigiciel.com>

This is a part of my email header

I send this mail from ogo and I open it with evolution

The line starting with Répondre à (Answer at)

We see iso-8859-15.   

again qith the line begining by  De (From:) 


X-Mailer:  OpenGroupware.org
Date: Fri, 02 Apr 2004 16:24:54 -0000
content-type:  text/plain
À: dchenard@croesus.com
Répondre à ::
=?iso-8859-15?q?=22Daniel=20Ch=E9nard=22=20=3Cd=5Fchenard=40videotron=2Eca=3E?=@zyfer.dyndns.org
De: Daniel Ch=?iso-8859-15?q?=E9nard?= <d_chenard@videotron.ca>
Sujet: test
MIME-Version:  1.0
content-transfer-encoding:  7bit
X-Croesus-MailScanner-Information:  Please contact the ISP for more
information
X-Croesus-MailScanner:  Found to be clean


Le ven 02/04/2004 à 10:54, Helge Hess a écrit :
> On Apr 2, 2004, at 4:39 PM, Daniel Chénard wrote:
> > There is any plan to change and/or to add an option to change the
> > character set in the Ogo??
> 
> No, and there will never be one. Web technology deals with character 
> sets in a completely transparent way.
> 
> What we need to do is to expand the support for characters sets, but 
> this is a different topic.
> 
> > I really like this project but the character set ISO-8859-15 disturb me
> > and my boss.
> 
> I'm not sure what disturbs you about the character set? What is your 
> exact problem?
> 
> regards,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge/
> OpenGroupware.org
-- 
Daniel Chénard
 
Croesus Finansoft Inc.
2 Place Laval, Suite 510
Laval, Quebec
Canada H7N 5N6
Site Web: www.croesus.com
 
Daniel.Chenard@croesus.com
Tel: +1 450-662-6101, 145
Fax: +1 450-662-3629
 
Please Note: The Light at the End of The Tunnel
             will be turned off until further
             notice due to budget cutbacks.
                                --The Managemen


From users@opengroupware.org  Fri Apr  2 17:41:33 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 2 Apr 2004 18:41:33 +0200
Subject: [OGo-Users] character set
In-Reply-To: <1080923628.19626.25.camel@xeyrus.unigiciel.com>
References: <1080916770.19626.16.camel@xeyrus.unigiciel.com> <F65CB660-84BD-11D8-90F1-000393BBAFF6@opengroupware.org> <1080923628.19626.25.camel@xeyrus.unigiciel.com>
Message-ID: <997C544C-84C4-11D8-8469-000393C29C2A@opengroupware.org>

On 02.04.2004, at 18:33, Daniel Ch=E9nard wrote:
> This is a part of my email header

You should have said that before ;-)

> I send this mail from ogo and I open it with evolution

OK.

> The line starting with R=E9pondre =E0 (Answer at)
> We see iso-8859-15.

Actually what you are complaining about is the quoted printable =20
encoding for umlauts, not about ISO-8859-15 (which is the regular =20
charset).

The encoding done by OGo is RFC 822 standards compliant and actually =20
*needs* to be done this way if you have non-ASCII or special characters =20=

in the mail header (I guess you have some French character in the name =20=

of the receiver).

If Evolution cannot decode that, its almost certainly a bug in =20
Evolution, not in OGo. Please give it a try with Mozilla Mail or =20
Thunderbird, it should work there.

best regards,
   Helge

> again qith the line begining by  De (From:)
>
> X-Mailer:  OpenGroupware.org
> Date: Fri, 02 Apr 2004 16:24:54 -0000
> content-type:  text/plain
> =C0: dchenard@croesus.com
> R=E9pondre =E0 ::
> =3D?iso-8859-15?q?=20
> =3D22Daniel=3D20Ch=3DE9nard=3D22=3D20=3D3Cd=3D5Fchenard=3D40videotron=3D=
2Eca=3D3E?=20
> =3D@zyfer.dyndns.org
> De: Daniel Ch=3D?iso-8859-15?q?=3DE9nard?=3D <d_chenard@videotron.ca>
> Sujet: test
> MIME-Version:  1.0
> content-transfer-encoding:  7bit
> X-Croesus-MailScanner-Information:  Please contact the ISP for more
> information
> X-Croesus-MailScanner:  Found to be clean
>
--=20
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Fri Apr  2 18:14:45 2004
From: users@opengroupware.org (Daniel =?ISO-8859-1?Q?Ch=E9nard?=)
Date: Fri, 02 Apr 2004 12:14:45 -0500
Subject: [OGo-Users] character set
In-Reply-To: <997C544C-84C4-11D8-8469-000393C29C2A@opengroupware.org>
References: <1080916770.19626.16.camel@xeyrus.unigiciel.com>
 <F65CB660-84BD-11D8-90F1-000393BBAFF6@opengroupware.org>
 <1080923628.19626.25.camel@xeyrus.unigiciel.com>
 <997C544C-84C4-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <1080926084.20618.1.camel@xeyrus.unigiciel.com>

Haaaaaaaaaa ;p

You're the best Helge!!

That's true... This is "ok" in mozilla


Le ven 02/04/2004 à 11:41, Helge Hess a écrit :
> On 02.04.2004, at 18:33, Daniel Chénard wrote:
> > This is a part of my email header
> 
> You should have said that before ;-)
> 
> > I send this mail from ogo and I open it with evolution
> 
> OK.
> 
> > The line starting with Répondre à (Answer at)
> > We see iso-8859-15.
> 
> Actually what you are complaining about is the quoted printable  
> encoding for umlauts, not about ISO-8859-15 (which is the regular  
> charset).
> 
> The encoding done by OGo is RFC 822 standards compliant and actually  
> *needs* to be done this way if you have non-ASCII or special characters  
> in the mail header (I guess you have some French character in the name  
> of the receiver).
> 
> If Evolution cannot decode that, its almost certainly a bug in  
> Evolution, not in OGo. Please give it a try with Mozilla Mail or  
> Thunderbird, it should work there.
> 
> best regards,
>    Helge
> 
> > again qith the line begining by  De (From:)
> >
> > X-Mailer:  OpenGroupware.org
> > Date: Fri, 02 Apr 2004 16:24:54 -0000
> > content-type:  text/plain
> > À: dchenard@croesus.com
> > Répondre à ::
> > =?iso-8859-15?q? 
> > =22Daniel=20Ch=E9nard=22=20=3Cd=5Fchenard=40videotron=2Eca=3E? 
> > =@zyfer.dyndns.org
> > De: Daniel Ch=?iso-8859-15?q?=E9nard?= <d_chenard@videotron.ca>
> > Sujet: test
> > MIME-Version:  1.0
> > content-transfer-encoding:  7bit
> > X-Croesus-MailScanner-Information:  Please contact the ISP for more
> > information
> > X-Croesus-MailScanner:  Found to be clean
> >
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
-- 
Daniel Chénard
 
Croesus Finansoft Inc.
2 Place Laval, Suite 510
Laval, Quebec
Canada H7N 5N6
Site Web: www.croesus.com
 
Daniel.Chenard@croesus.com
Tel: +1 450-662-6101, 145
Fax: +1 450-662-3629
 
Please Note: The Light at the End of The Tunnel
             will be turned off until further
             notice due to budget cutbacks.
                                --The Managemen


From users@opengroupware.org  Fri Apr  2 19:07:33 2004
From: users@opengroupware.org (Jeff Self)
Date: Fri, 02 Apr 2004 13:07:33 -0500
Subject: [OGo-Users] Image Problems (again ... sorry)
In-Reply-To: <406C95F8.8000301@salford.ac.uk>
References: <406C95F8.8000301@salford.ac.uk>
Message-ID: <1080929253.15047.1.camel@jselfpc>

On Thu, 2004-04-01 at 17:21, Grahame Cooper wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Hi
> 
> I am having the problem that has been reported so many times, but I am
> tearing my hair out now.
> 
> Using Mandrake 9.2 with OGo from the Mandrake RPMs.
> 
> I can access the ogo server and navigate the various pages (User,
> Manager, News, etc.), but the images are all missing.
> 
> I have read the FAQ and tried symlinking the image directory in several
> locations (the first is the real one):
> 
> /usr/lib/opengroupware.org/WebServerResources/English.lproj
> /usr/lib/opengroupware.org/OpenGroupware.woa/WebServerResources/English.lproj
> /usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/WebServerResources/English.lproj
> /usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/English.lproj
> /usr/lib/opengroupware.org/WOApps/English.lproj
> /usr/lib/opengroupware.org/WOApps/WebServerResources/English.lproj
> 
> With all of these symlinks in place, it still doesn't work.
> 
> In the web page, the links to the images are:
> 
> http://hostname:port/OpenGroupware.woa/WebServerResources/English.lproj/imagename.gif
> 
> Log messages are all of the form:
> 
> Apr 02 00:04:09 OpenGroupware [25417]: <0x084395A4[WOHttpTransaction]>
> ERROR: got no response for request <WORequest[0x083E41CC]: method=GET
> uri=/OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif
> app=OpenGroupware rqKey=WebServerResources rqPath=English.lproj/tab_.gif> ..
> clienthostname - - [02/Apr/2004:00:04:09 GMT] "GET
> /OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif HTTP/1.1"
> 500 0 0.0
> 10 - - 0
> 
> What am I doing wrong? Does anyone have any ideas?
> 

I was running into the same problem. You aren't putting in the proper
URL. It should be http://servername:20000/OpenGroupware/

If this isn't working, then either Apache isn't configured correctly or
you aren't starting it correctly.
-- 
Jeff Self
Dept. of Information Technology
City of Newport News
757-926-3741


From users@opengroupware.org  Fri Apr  2 19:26:49 2004
From: users@opengroupware.org (Kelley G)
Date: Fri, 02 Apr 2004 11:26:49 -0700
Subject: [OGo-Users] Image Problems (again ... sorry)
In-Reply-To: <1080929253.15047.1.camel@jselfpc>
References: <406C95F8.8000301@salford.ac.uk> <1080929253.15047.1.camel@jselfpc>
Message-ID: <406DB069.5010100@toasterz.com>

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
  <title></title>
</head>
<body>
Jeff Self wrote:<br>
<blockquote cite="mid1080929253.15047.1.camel@jselfpc" type="cite">
  <pre wrap="">On Thu, 2004-04-01 at 17:21, Grahame Cooper wrote:
  </pre>
  <blockquote type="cite">
    <pre wrap="">-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi

I am having the problem that has been reported so many times, but I am
tearing my hair out now.

Using Mandrake 9.2 with OGo from the Mandrake RPMs.

I can access the ogo server and navigate the various pages (User,
Manager, News, etc.), but the images are all missing.

I have read the FAQ and tried symlinking the image directory in several
locations (the first is the real one):

/usr/lib/opengroupware.org/WebServerResources/English.lproj
/usr/lib/opengroupware.org/OpenGroupware.woa/WebServerResources/English.lproj
/usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/WebServerResources/English.lproj
/usr/lib/opengroupware.org/WOApps/OpenGroupware.woa/English.lproj
/usr/lib/opengroupware.org/WOApps/English.lproj
/usr/lib/opengroupware.org/WOApps/WebServerResources/English.lproj

With all of these symlinks in place, it still doesn't work.

In the web page, the links to the images are:

<a class="moz-txt-link-freetext" href="http://hostname:port/OpenGroupware.woa/WebServerResources/English.lproj/imagename.gif">http://hostname:port/OpenGroupware.woa/WebServerResources/English.lproj/imagename.gif</a>

Log messages are all of the form:

Apr 02 00:04:09 OpenGroupware [25417]: &lt;0x084395A4[WOHttpTransaction]&gt;
ERROR: got no response for request &lt;WORequest[0x083E41CC]: method=GET
uri=/OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif
app=OpenGroupware rqKey=WebServerResources rqPath=English.lproj/tab_.gif&gt; ..
clienthostname - - [02/Apr/2004:00:04:09 GMT] "GET
/OpenGroupware.woa/WebServerResources/English.lproj/tab_.gif HTTP/1.1"
500 0 0.0
10 - - 0

What am I doing wrong? Does anyone have any ideas?

    </pre>
  </blockquote>
  <pre wrap=""><!---->
I was running into the same problem. You aren't putting in the proper
URL. It should be <a class="moz-txt-link-freetext" href="http://servername:20000/OpenGroupware/">http://servername:20000/OpenGroupware/</a>

If this isn't working, then either Apache isn't configured correctly or
you aren't starting it correctly.
  </pre>
</blockquote>
you do nt need the port number to access ogo.<br>
ie<br>
servername/OpenGroupware<br>
<br>
check that the symlinks are configured correctly.<br>
this has been covered ALOT on the users list.<br>
<pre class="moz-signature" cols="72">-- 

kelley g

oooooooooooooooooooooooooo
<a class="moz-txt-link-freetext" href="http://toasterz.com">http://toasterz.com</a>
<a class="moz-txt-link-freetext" href="http://exchangekiller.com">http://exchangekiller.com</a>
oooooooooooooooooooooooooo</pre>
</body>
</html>

From users@opengroupware.org  Fri Apr  2 20:29:44 2004
From: users@opengroupware.org (Dirk H Bartley)
Date: 02 Apr 2004 14:29:44 -0500
Subject: [OGo-Users] Data to and from opengroupware
Message-ID: <1080934184.8443.173.camel@dbartley3>

Greetings

I am attempting to use the xml-rpc api to get data into and back out of
opengroupware.  Right now I have a new install of opengroupware with
just a couple of accounts and an example enterprise.

I have a 3 part goal.  

First, I would like to import all of the customers and associated
contacts in our business software system be imported into
opengroupware.  

Second, If someone is in our business system adds or edits a customer or
contact, I feel confident I will be able to use triggers in it's
database to cause an xml-api program (perl/c/python) to run and modify
the correlating data in ogo.  

Third, somehow program a trigger in opengroupware set to update
information in my business database when someone changes data in
opengroupware.

I feel confident I can eventually figure out the first and second items,
but I have hit a snag.  I have perl and c experience but none in python
which seems to be the dominant way to communicate with ogo through xml.
http://docs.opengroupware.org/Members/bjoern/xml-rpc-en.pdf looks like
good reading to get it going using python but python is unfamiliar to
me.   
http://gnu.kookel.org/ftp/opengroupware.org/en/devs/resources/xmlrpc/perlinfo.html I can get Frontier to work to read data from ogo with perl but I see nothing on writing to ogo.  What is the syntax to do write to it??
Or http://www.werthmoeller.de/doc/microhowtos/ogo/xmlrpc/en which has
been a little frustrating to work with.
http://gnu.kookel.org/ftp/opengroupware.org/en/devs/resources/xmlrpc/c_sample/index.html won't compile because I don't have the appropriate headers and there is no mention on this page what need to be done to correct that.


The biggest question I have that none of these documents seem to cover
is what are the lists of data items that can be modified for each insert
or modify method for each of the packages (ie enterprise account
person).

The second question I have is what would be the procedure to get
opengroupware to trigger a program when it is changed.

And lastly, does anyone have any suggestions, like python is it, learn
or suffer.  or ..  Perl is great, and there is a document out there I
have not found yet.  There just has to be more examples out there that I
have just not found yet, where can I find them.

Thank You in advance,

Dirk Bartley


From users@opengroupware.org  Fri Apr  2 20:59:09 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Fri, 02 Apr 2004 14:59:09 -0500
Subject: [OGo-Users] Uncatched Objective-C exception and other startup errors
Message-ID: <406DC60D.5080706@gonsman.com>

OK,  I have done some serious hard time trying to get this working and 
now have come to a brick wall.

It looks I can start opengroupware using the init script as follows

------------------------------
/etc/init.d/opengroupware start
------------------------------

I get the nice green [ OK ] after each service starts, but I can not 
access the web admin page.  When I start opengroupware as follows

------------------------------
./OpenGroupware.woa/ix86/linux-gnu/gnu-fd-nil/OpenGroupware
------------------------------

I get many errors (about 8,500) with the following text

------------------------------
Uncatched Objective-C exception:
------------------------------

and at the end

------------------------------
Segmentation fault
------------------------------

If I try to start opengroupware as user "opengroupware" using the 
previous method it will start, but I must first precede it with "source 
/opt/opengroupware.org/OpenGroupware.org.sh".  It appears that it is 
starting fine, but still the web does not respond.  If I try to access 
the web at this point, I get the following errors

------------------------------
Apr 02 19:46:10 OpenGroupware [4009]: WOHttpAdaptor: ACCESS DENIED: 
<InetSocketAddress: gonsman.gotdns.com:33376>
Apr 02 19:46:10 OpenGroupware [4009]: WOHttpAdaptor: ACCESS DENIED: 
<InetSocketAddress: gonsman.gotdns.com:33377>
------------------------------

And yes, I have the domain in the WOHttpAllowHost variable

Here are my specs:
Red Hat 9 from self made CD's using the images from Red Hat's web site
Apache 1.3.29 (with apxs support)
mx-2.0.3-8
libxml2-2.5.4-3.rh9
libxml-devel-1.8.17-8
python-2.2.2-26
python-devel-2.2.2-26
Perl 5.8.0
Cyrix 166Mhz, 192 MB Ram, 4.3 GB HD

So, what to do now?

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Fri Apr  2 21:13:25 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Fri,  2 Apr 2004 15:13:25 -0500
Subject: [OGo-Users] Data to and from opengroupware
In-Reply-To: <1080934184.8443.173.camel@dbartley3>
References: <1080934184.8443.173.camel@dbartley3>
Message-ID: <1080936805.406dc965ee6c1@www.mormail.com>

> First, I would like to import all of the customers and associated
> contacts in our business software system be imported into
> opengroupware.  
> Second, If someone is in our business system adds or edits a customer or
> contact, I feel confident I will be able to use triggers in it's
> database to cause an xml-api program (perl/c/python) to run and modify
> the correlating data in ogo.  
> Third, somehow program a trigger in opengroupware set to update
> information in my business database when someone changes data in
> opengroupware.

You can define update/insert/delete triggers on the PostgreSQL tables.

> I can get Frontier to work to read data from ogo with perl but I see nothing
> on writing to ogo.  What is the syntax to do write to it??

You create an array that contains the document (contact, enterprise, etc...)

> Or http://www.werthmoeller.de/doc/microhowtos/ogo/xmlrpc/en which has
> been a little frustrating to work with.

http://gnu.kookel.org/ftp/opengroupware.org/en/devs/resources/xmlrpc/c_sample/index.html

Ah, I think that one uses libwww so you need to have all those RPMs installed; 
it is indeed dreadful to work with, and compiling is horrible.

> won't compile because I don't have the appropriate headers and there is no
> mention on this page what need to be done to correct that.
> The biggest question I have that none of these documents seem to cover
> is what are the lists of data items that can be modified for each insert
> or modify method for each of the packages (ie enterprise account
> person).

You pass the call a complete document, and it updates the database.

> The second question I have is what would be the procedure to get
> opengroupware to trigger a program when it is changed.

The only method I've discovered is to define a trigger in the database,  just
journal the new record out to someplace you can slurp it from.
 
> And lastly, does anyone have any suggestions, like python is it, learn
> or suffer.  or ..  Perl is great, and there is a document out there I
> have not found yet.  There just has to be more examples out there that I
> have just not found yet, where can I find them.

I've pulled off some stuff with PHP,  and I'm still thrashing against walls with
C#,  so things other than python certainly work but the documentation is
certainly biased.

From users@opengroupware.org  Fri Apr  2 22:35:23 2004
From: users@opengroupware.org (Dirk H Bartley)
Date: 02 Apr 2004 16:35:23 -0500
Subject: [OGo-Users] Data to and from opengroupware
In-Reply-To: <1080936805.406dc965ee6c1@www.mormail.com>
References: <1080934184.8443.173.camel@dbartley3>
 <1080936805.406dc965ee6c1@www.mormail.com>
Message-ID: <1080941723.8443.198.camel@dbartley3>

On Fri, 2004-04-02 at 15:13, Adam Tauno Williams wrote:
> > First, I would like to import all of the customers and associated
> > contacts in our business software system be imported into
> > opengroupware.  
> > Second, If someone is in our business system adds or edits a customer or
> > contact, I feel confident I will be able to use triggers in it's
> > database to cause an xml-api program (perl/c/python) to run and modify
> > the correlating data in ogo.  
> > Third, somehow program a trigger in opengroupware set to update
> > information in my business database when someone changes data in
> > opengroupware.
> 
> You can define update/insert/delete triggers on the PostgreSQL tables.

I knew that option was available, but I was thinking that there would be
some reason not to because I've read before it is a bad thing to try to
update the ogo database directly (without using the xml-rpc interface),
but never really stopped to think that for the sake of these triggers I
would not need to modify the database, just read from it.  Ok, works for
me.

> 
> > I can get Frontier to work to read data from ogo with perl but I see nothing
> > on writing to ogo.  What is the syntax to do write to it??
> 
> You create an array that contains the document (contact, enterprise, etc...)

That I tried and failed.

#as an array
@val=("new ent", "email\@newent.com");
@result = $client->call('enterprise.insert',@val);
#as a scaler
$val='name="new ent" email="email@newent.com"';
@result = $client->call('enterprise.insert',$val);
#and finally as a hash
%val=('name'=>"new ent", 'email'=>'email@newent.com');
@result = $client->call('enterprise.insert',%val);

all attempts result in:
Fault returned from XML RPC Server, fault code 0: ObjcRuntimeException:
NSShortInline8BitString (instance) does not recognize objectForKey:
> 
> > Or http://www.werthmoeller.de/doc/microhowtos/ogo/xmlrpc/en which has
> > been a little frustrating to work with.
> 
> http://gnu.kookel.org/ftp/opengroupware.org/en/devs/resources/xmlrpc/c_sample/index.html
> 
> Ah, I think that one uses libwww so you need to have all those RPMs installed; 
> it is indeed dreadful to work with, and compiling is horrible.
> 
> > won't compile because I don't have the appropriate headers and there is no
> > mention on this page what need to be done to correct that.
> > The biggest question I have that none of these documents seem to cover
> > is what are the lists of data items that can be modified for each insert
> > or modify method for each of the packages (ie enterprise account
> > person).
> 
> You pass the call a complete document, and it updates the database.
Yes, but what determines what a complete document is and what data
elements are even available.

Would it be a entry for each of the results of the following program.

#!/usr/bin/perl
use Frontier::Client;
$client = Frontier::Client->new( url =>
"http://root:whopper\@localhost/RPC2");
@result = $client->call('enterprise.fetch',"name like \'*\'");
$count = @{$result[0]};
print "The count is $count\n";
for $i (0 .. $count-1)
{
        $element = $result[0]->[$i];
        my($key, $value);  # @cc{Declare two variables at once}
        while ( ($key, $value) = each(%$element) ) {
                if( $value =~ "HASH" ){ next; };
                if( $value =~ "ARRAY" ){ next; };
                print "$key is valued as $value\n";
        }
        print "\n";
}

which results in:

The count is 1
objectVersion is valued as 6
number is valued as SKY10330
name is valued as Schupan Aluminum Sales
email is valued as sales@schupan.com
isComplete is valued as Frontier::RPC2::Boolean=SCALAR(0x81fefe8)
keywords is valued as
url is valued as http://schupanalum.com
id is valued as
skyrix://srvalumtest2.schupan.com/srvalumtest2.schupan.com/10330

The output gets nastier if you take out the 2 next lines in the program.

So does this mean that the available values are number, name, email,
keywords,url,id and the HASHes and ARRAYs which I still need to figure
out how to parse in perl.

> 
> > The second question I have is what would be the procedure to get
> > opengroupware to trigger a program when it is changed.
> 
> The only method I've discovered is to define a trigger in the database,  just
> journal the new record out to someplace you can slurp it from.
>  
> > And lastly, does anyone have any suggestions, like python is it, learn
> > or suffer.  or ..  Perl is great, and there is a document out there I
> > have not found yet.  There just has to be more examples out there that I
> > have just not found yet, where can I find them.
> 
> I've pulled off some stuff with PHP,  and I'm still thrashing against walls with
> C#,  so things other than python certainly work but the documentation is
> certainly biased.
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users



From users@opengroupware.org  Sat Apr  3 06:11:14 2004
From: users@opengroupware.org (Joshua McClintock)
Date: Fri, 2 Apr 2004 21:11:14 -0800
Subject: [OGo-Users] free/busy display when making proposal
Message-ID: <002601c4193a$16c0d3f0$e910bf83@zoolander>

When you are creating a meeting, the free busy display is sort of useless
for figuring out which person is the one who's not available.  Why not put
people's name in the red boxes so you can tell who's unavailable.

Is there a way to get it to display differently?


From users@opengroupware.org  Sun Apr  4 08:59:10 2004
From: users@opengroupware.org (AARON NICHOL-COWELL)
Date: Sun, 04 Apr 2004 17:59:10 +1000
Subject: [OGo-Users] opengroupware and apache
Message-ID: <4bfbe4a031.4a0314bfbe@studentmail.newcastle.edu.au>

I have installed opengroupware and have been getting errors. The
images will not display, but the rest of the web application will. Here is
part of the log file.


myserver - - [04/Apr/2004:08:13:32 GMT] "GET
/OpenGroupware.woa/WebServerResources/English.lproj/box_topleft.gif
HTTP/1.1" 500 0 0.002 - - 0 Apr 04 08:13:32 OpenGroupware [14379]:
<0x08C4D614[WOHttpTransaction]> ERROR: got no response for request
<WORequest[0x08BA67C4]: method=GET
uri=/OpenGroupware.woa/WebServerResources/English.lproj/tab_selected.gif
app=OpenGroupware rqKey=WebServerResources
rqPath=English.lproj/tab_selected.gif> ..

The file 'tab_selected.gif' cannot be found. But is located at:

/opt/opengroupware.org/WOApps/PLRApp.woa/WebServerResources/tab_selected.gif

I need to make a soft link to where the files need to be located but I
don't know where this is, can someone please help me.

Thanks.



From users@opengroupware.org  Sun Apr  4 10:05:51 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Sun, 4 Apr 2004 04:05:51 -0500
Subject: [OGo-Users] opengroupware and apache
In-Reply-To: <4bfbe4a031.4a0314bfbe@studentmail.newcastle.edu.au>
References: <4bfbe4a031.4a0314bfbe@studentmail.newcastle.edu.au>
Message-ID: <200404040505.51686.chris123@magma.ca>

On April 4, 2004 03:59 am, AARON NICHOL-COWELL wrote:
> I have installed opengroupware and have been getting errors. The

> I need to make a soft link to where the files need to be located but I
> don't know where this is, can someone please help me.

see http://sukka.jct.ac.il/~yedidia/ogo_rh.html  ,first screenshot, last line 
(os independent)

Enjoy

/ch

From users@opengroupware.org  Sun Apr  4 12:24:30 2004
From: users@opengroupware.org (Alessandro Amici)
Date: Sun, 4 Apr 2004 13:24:30 +0200
Subject: [OGo-Users] broken reconfiguration on Sebastian Ley debs
Message-ID: <200404041324.30658.alexamici@fastwebnet.it>

--Boundary-00=_uB/bA4bH2xjfIyj
Content-Type: text/plain;
  charset="iso-8859-15"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


[note that this problem is related to the debian packages by Sebastian Ley, 
not the Skyrix ones]

Sebastian,

i just updated the ogo debs and i still hit a reconfiguration problem that is 
present since a few releases. i think i sent you a patch already (but i had 
mail problems at around the same time, so i'm not sure that the mail actually 
left my system :( ).

the bug:
on 'dpkg-reconfigure opengroupware.org' and during package upgrades i still 
get a spurious double-quote (") at the end of the hostname and the 
reconfiguration fails.
the bug doesn't show up on a fresh install.

the fix:
the attached patch to opengroupware.org.config fixes the problem.

please apply,
alessandro

--Boundary-00=_uB/bA4bH2xjfIyj
Content-Type: text/x-diff;
  charset="iso-8859-15";
  name="ogo-hostname-fix.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="ogo-hostname-fix.patch"

--- opengroupware.org.config	2004-04-04 13:09:59.000000000 +0200
+++ opengroupware.org.config.orig	2004-04-04 13:08:28.000000000 +0200
@@ -14,7 +14,7 @@
             # Well what to do now...?!?
             ;;
     esac
-    DEFAULTS_DB_HOST=$(su - -c "Defaults read NSGlobalDomain LSConnectionDictionary | grep hostName | sed -e s+^.*=\ *\\\"*++ -e s+\\\"\;.*\$++" ogo) || true
+    DEFAULTS_DB_HOST=$(su - -c "Defaults read NSGlobalDomain LSConnectionDictionary | grep hostName | sed -e s+^.*=\ *\\\"*++ -e s+\;.*\$++" ogo) || true
     db_set opengroupware.org/db_host "$DEFAULTS_DB_HOST"
     DEFAULTS_DB_PORT=$(su - -c "Defaults read NSGlobalDomain LSConnectionDictionary | grep port | sed -e s+^.*=\ *\\\"*++ -e s+\;.*\$++" ogo) || true
     db_set opengroupware.org/db_port "$DEFAULTS_DB_PORT"

--Boundary-00=_uB/bA4bH2xjfIyj--

From users@opengroupware.org  Sun Apr  4 12:43:06 2004
From: users@opengroupware.org (Sebastian Ley)
Date: Sun, 04 Apr 2004 13:43:06 +0200
Subject: [OGo-Users] broken reconfiguration on Sebastian Ley debs
In-Reply-To: <200404041324.30658.alexamici@fastwebnet.it>
References: <200404041324.30658.alexamici@fastwebnet.it>
Message-ID: <1081078986.3696.4.camel@coyote.mmweg>

Am So, den 04.04.2004 schrieb Alessandro Amici um 13:24:

> i just updated the ogo debs and i still hit a reconfiguration problem that is 
> present since a few releases. i think i sent you a patch already (but i had 
> mail problems at around the same time, so i'm not sure that the mail actually 
> left my system :( ).

No did not get that...

> the bug:
> on 'dpkg-reconfigure opengroupware.org' and during package upgrades i still 
> get a spurious double-quote (") at the end of the hostname and the 
> reconfiguration fails.
> the bug doesn't show up on a fresh install.

Hm, so the hostname in the output of 
"Defaults read NSGlobalDomain LSConnectionDictionary"
is quoted in ""? (Please post the output of the above command here). On
my setup it is not, and honestly I do not really understand when strings
are quoted and when not in the output of Defaults. Additionally that
grepping and sed-ing is pretty hackish, but the Defaults tool is not
flexible enough to output the real values if i am not mistaken...

> the fix:
> the attached patch to opengroupware.org.config fixes the problem

I suppose the the patch is in the wrong order? ;-)
I'll have a look at it, thanks!

Sebastian

-- 
PGP-Key: http://www.mmweg.rwth-aachen.de/~sebastian.ley/public.key
Fingerprint: A46A 753F AEDC 2C01 BE6E  F6DB 97E0 3309 9FD6 E3E6



From users@opengroupware.org  Sun Apr  4 14:31:38 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 4 Apr 2004 15:31:38 +0200
Subject: [OGo-Users] free/busy display when making proposal
In-Reply-To: <002601c4193a$16c0d3f0$e910bf83@zoolander>
References: <002601c4193a$16c0d3f0$e910bf83@zoolander>
Message-ID: <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org>

On 03.04.2004, at 07:11, Joshua McClintock wrote:
> When you are creating a meeting, the free busy display is sort of 
> useless
> for figuring out which person is the one who's not available.

Well, "useless" is exaggerated, but I agree it would be quite useful. 
Feel free to post an enhancement request in Bugzilla:
   http://bugzilla.opengroupware.org/

> Why not put people's name in the red boxes so you can tell who's 
> unavailable.

Because the space is not sufficient for that. But we might be able to 
use an image-tooltip text or some form of a JavaScript layer.

> Is there a way to get it to display differently?

Well, if you just create the meeting using "new" and press "save", the 
system's conflict panel will come up with detailed information who or 
what is missing.

Of course you can also use the regular chart (week or day) view to make 
your planning in a more interactive way. I think this view is what you 
actually expect/want.
Note that you can select arbitary persons/resources in the main 
scheduler view if you press the "down arrow" button on the right of the 
team popup.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr  4 15:25:56 2004
From: users@opengroupware.org (T Reaves)
Date: Sun, 4 Apr 2004 10:25:56 -0400
Subject: [OGo-Users] Can not connect to sieve
Message-ID: <FCB6FB92-8643-11D8-B8A9-000A95981632@silverfieldstech.com>

	Now, in SquirrelMail, I can create sieve filers.  But I still can not 
publish them from ogo.  The error is now:
Apr  1 23:15:16 stech timsieved[30107]: badlogin: localhost[127.0.0.1] 
PLAIN error base64 decoding string

	I do not get this error from SquirrelMail publishing, so I'm fairly 
confident about it being something related to ogo.


From users@opengroupware.org  Sun Apr  4 16:45:23 2004
From: users@opengroupware.org (Alessandro Amici)
Date: Sun, 4 Apr 2004 17:45:23 +0200
Subject: [OGo-Users] broken reconfiguration on Sebastian Ley debs
In-Reply-To: <1081078986.3696.4.camel@coyote.mmweg>
References: <200404041324.30658.alexamici@fastwebnet.it> <1081078986.3696.4.camel@coyote.mmweg>
Message-ID: <200404041745.23333.alexamici@fastwebnet.it>

Sebastian,

> > the bug:
> > on 'dpkg-reconfigure opengroupware.org' and during package upgrades i
> > still get a spurious double-quote (") at the end of the hostname and the
> > reconfiguration fails.
> > the bug doesn't show up on a fresh install.
>
> Hm, so the hostname in the output of
> "Defaults read NSGlobalDomain LSConnectionDictionary"
> is quoted in ""? (Please post the output of the above command here). 

ogo:~$ Defaults read NSGlobalDomain LSConnectionDictionary
{
    databaseName = ogo;
    hostName = "localhost.localdomain";
    password = M$rules;
    port = 5432;
    userName = ogo;
}

no matter if i enter "localhost.localdomain" or  simply "localhost" without 
".localdomain" to the first debconf question.

> On 
> my setup it is not, and honestly I do not really understand when strings
> are quoted and when not in the output of Defaults. Additionally that
> grepping and sed-ing is pretty hackish,

i agree, but once you take that route you need to remove leading *and* 
trailing double-quotes ;)

> but the Defaults tool is not 
> flexible enough to output the real values if i am not mistaken...
>
> > the fix:
> > the attached patch to opengroupware.org.config fixes the problem
>
> I suppose the the patch is in the wrong order? ;-)

d'oh!

thanks,
alessandro

From users@opengroupware.org  Sun Apr  4 18:12:38 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 4 Apr 2004 19:12:38 +0200
Subject: [OGo-Users] Uncatched Objective-C exception and other startup errors
In-Reply-To: <406DC60D.5080706@gonsman.com>
References: <406DC60D.5080706@gonsman.com>
Message-ID: <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org>

On 02.04.2004, at 21:59, Sean Gonsman wrote:
> If I try to start opengroupware as user "opengroupware" using the 
> previous method it will start, but I must first precede it with 
> "source /opt/opengroupware.org/OpenGroupware.org.sh".

Exactly. All your other segfault errors are probably due to not 
properly sourcing the shell script.

> It appears that it is starting fine, but still the web does not 
> respond.  If I try to access the web at this point, I get the 
> following errors
> ------------------------------
> Apr 02 19:46:10 OpenGroupware [4009]: WOHttpAdaptor: ACCESS DENIED: 
> <InetSocketAddress: gonsman.gotdns.com:33376>
> Apr 02 19:46:10 OpenGroupware [4009]: WOHttpAdaptor: ACCESS DENIED: 
> <InetSocketAddress: gonsman.gotdns.com:33377>
> ------------------------------

This is in the FAQ, search for ACCESS DENIED. Properly install the 
Apache module.

> And yes, I have the domain in the WOHttpAllowHost variable

As described in the FAQ (and as the name implies ...) you need to 
configure the hostname, not the domain.
And you don't need to configure that at all if you connect using Apache 
which is the correct way.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr  4 18:24:05 2004
From: users@opengroupware.org (Joshua McClintock)
Date: Sun, 4 Apr 2004 10:24:05 -0700
Subject: [OGo-Users] free/busy display when making proposal
References: <002601c4193a$16c0d3f0$e910bf83@zoolander> <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <008801c41a69$a2237ee0$e910bf83@zoolander>

The only reason I used the word 'useless' is because I'm having people here
demo it to see if it'll work for them.  One of the first things they tried
was making a meeting that conflicted with someone elses time to see how it
would display the conflicts.  Needless to say, they wern't impressed and
basically won't use it because of this.  I know this isn't you're problem,
but just trying to express that fixing this would really help this products
acceptance (at least at my company).

Would an enhancement like you're talking about (Javascript deal) take very
long?

I will head to bugzilla right now and post this email thread.

----- Original Message ----- 
From: "Helge Hess" <helge.hess@opengroupware.org>
To: <users@opengroupware.org>
Sent: Sunday, April 04, 2004 6:31 AM
Subject: Re: [OGo-Users] free/busy display when making proposal


> On 03.04.2004, at 07:11, Joshua McClintock wrote:
> > When you are creating a meeting, the free busy display is sort of
> > useless
> > for figuring out which person is the one who's not available.
>
> Well, "useless" is exaggerated, but I agree it would be quite useful.
> Feel free to post an enhancement request in Bugzilla:
>    http://bugzilla.opengroupware.org/
>
> > Why not put people's name in the red boxes so you can tell who's
> > unavailable.
>
> Because the space is not sufficient for that. But we might be able to
> use an image-tooltip text or some form of a JavaScript layer.
>
> > Is there a way to get it to display differently?
>
> Well, if you just create the meeting using "new" and press "save", the
> system's conflict panel will come up with detailed information who or
> what is missing.
>
> Of course you can also use the regular chart (week or day) view to make
> your planning in a more interactive way. I think this view is what you
> actually expect/want.
> Note that you can select arbitary persons/resources in the main
> scheduler view if you press the "down arrow" button on the right of the
> team popup.
>
> regards,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>
>


From users@opengroupware.org  Sun Apr  4 18:23:55 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 4 Apr 2004 19:23:55 +0200
Subject: [OGo-Users] Data to and from opengroupware
In-Reply-To: <1080941723.8443.198.camel@dbartley3>
References: <1080934184.8443.173.camel@dbartley3>  <1080936805.406dc965ee6c1@www.mormail.com> <1080941723.8443.198.camel@dbartley3>
Message-ID: <D9E9BF14-865C-11D8-8469-000393C29C2A@opengroupware.org>

On 02.04.2004, at 23:35, Dirk H Bartley wrote:
>> You can define update/insert/delete triggers on the PostgreSQL tables.
>
> I knew that option was available, but I was thinking that there would 
> be
> some reason not to because I've read before it is a bad thing to try to
> update the ogo database directly (without using the xml-rpc interface),
> but never really stopped to think that for the sake of these triggers I
> would not need to modify the database, just read from it.  Ok, works 
> for
> me.

OGo itself does not provide triggers, so you either poll the database 
for changes or use database triggers. Of course you are discouraged 
working on the database level and the actions performed by your trigger 
should probably be non-SQL actions but scripts which in turn use 
XML-RPC for processing data.

Easiest thing IMHO is to poll for changes, which is not really hard 
given that all OGo objects have an associated generation count.

>>> I can get Frontier to work to read data from ogo with perl but I see 
>>> nothing on writing to ogo.  What is the syntax to do write to it??
>> You create an array that contains the document (contact, enterprise, 
>> etc...)
>
> That I tried and failed.
>
> #as an array
> @val=("new ent", "email\@newent.com");
> @result = $client->call('enterprise.insert',@val);
> #as a scaler
> $val='name="new ent" email="email@newent.com"';
> @result = $client->call('enterprise.insert',$val);
> #and finally as a hash
> %val=('name'=>"new ent", 'email'=>'email@newent.com');
> @result = $client->call('enterprise.insert',%val);

I think the last one is correct (of course with many more keys). To 
find out the structure you need to submit for new documents, just query 
an existing document.
For debugging the "-WOHttpAdaptor_LogStream YES" commandline parameter 
is quite helpful as it shows what is actually transmitted by your 
client.

> all attempts result in:
> Fault returned from XML RPC Server, fault code 0: ObjcRuntimeException:
> NSShortInline8BitString (instance) does not recognize objectForKey:

This should actually be catched by the XML-RPC layer, not at ObjC 
level. So please create a bugreport in Bugzilla:

   http://bugzilla.opengroupware.org/

and attach a small script to reproduce the issue (Python very much 
preferred ;-)

>> You pass the call a complete document, and it updates the database.
> Yes, but what determines what a complete document is and what data
> elements are even available.

There are Objective-C objects like "SkyContactDocument" which are able 
to encode/decode themselves from XML-RPC structures. So those 
"determine" the actual datastructure in the XML-RPC transport.

I admit that this is somewhat (very ;-) ugly and should be moved to the 
XML-RPC layer and get properly documented.

Unfortunately I can't help you a lot with those (unreadable ;-) Perl 
things.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr  4 18:25:12 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 4 Apr 2004 19:25:12 +0200
Subject: [OGo-Users] Problem with timezone
In-Reply-To: <20040401082308.7FB6B3440A5@mail.opennet.ae>
References: <20040401082308.7FB6B3440A5@mail.opennet.ae>
Message-ID: <07B0A6EC-865D-11D8-8469-000393C29C2A@opengroupware.org>

On 01.04.2004, at 10:23, Adel Ben Zarrouk wrote:
>  Please about the time zone, i need your help, i'am in middle east 
> (UAE), the exact time here is GMT+4 , in opengroupware ,what is 
> exactly i can configure the time zone (MET,PST...????)

Olivier wrote some nice document about OGo timezones:
   http://docs.opengroupware.org/Members/olivier/tz2/view

This should help.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr  4 18:36:13 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 4 Apr 2004 19:36:13 +0200
Subject: [OGo-Users] free/busy display when making proposal
In-Reply-To: <008801c41a69$a2237ee0$e910bf83@zoolander>
References: <002601c4193a$16c0d3f0$e910bf83@zoolander> <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org> <008801c41a69$a2237ee0$e910bf83@zoolander>
Message-ID: <9165AEEA-865E-11D8-8469-000393C29C2A@opengroupware.org>

On 04.04.2004, at 19:24, Joshua McClintock wrote:
> One of the first things they tried was making a meeting that 
> conflicted with someone elses time to see how it would display the 
> conflicts. Needless to say, they wern't impressed and basically won't 
> use it because of this.

What exactly is wrong with the conflict panel?

Also, what is wrong with the appointment charts (not the proposal)? It 
displays the information you requested.

> Would an enhancement like you're talking about (Javascript deal) take 
> very long?

Not sure, this would need to be investigated - not sure whether the 
proposal algorithm currently can easily provide this information.
Also I think that OGo already does what you want in the chart views.

> I will head to bugzilla right now and post this email thread.

Please do not post email threads, but detailed information on what 
exactly you want and why.
Please also post one bug per issue (eg individual ones for 
conflict-panel issues, for proposal issues and for chartview issues).

Thanks a lot,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr  4 18:53:06 2004
From: users@opengroupware.org (Joshua McClintock)
Date: Sun, 4 Apr 2004 10:53:06 -0700
Subject: [OGo-Users] free/busy display when making proposal
References: <002601c4193a$16c0d3f0$e910bf83@zoolander> <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org> <008801c41a69$a2237ee0$e910bf83@zoolander> <9165AEEA-865E-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <012c01c41a6d$af31cb10$e910bf83@zoolander>

Sorry on the enhancement, I already posted it.

The conflict panel (if that's the red boxes / green triangles) doesn't show
you WHO is causing the conflict, it just shows you the fact that there is
one.

I didn't know about the appt. chart, I'll have the person here try that out.

----- Original Message ----- 
From: "Helge Hess" <helge.hess@opengroupware.org>
To: <users@opengroupware.org>
Sent: Sunday, April 04, 2004 10:36 AM
Subject: Re: [OGo-Users] free/busy display when making proposal


> On 04.04.2004, at 19:24, Joshua McClintock wrote:
> > One of the first things they tried was making a meeting that
> > conflicted with someone elses time to see how it would display the
> > conflicts. Needless to say, they wern't impressed and basically won't
> > use it because of this.
>
> What exactly is wrong with the conflict panel?
>
> Also, what is wrong with the appointment charts (not the proposal)? It
> displays the information you requested.
>
> > Would an enhancement like you're talking about (Javascript deal) take
> > very long?
>
> Not sure, this would need to be investigated - not sure whether the
> proposal algorithm currently can easily provide this information.
> Also I think that OGo already does what you want in the chart views.
>
> > I will head to bugzilla right now and post this email thread.
>
> Please do not post email threads, but detailed information on what
> exactly you want and why.
> Please also post one bug per issue (eg individual ones for
> conflict-panel issues, for proposal issues and for chartview issues).
>
> Thanks a lot,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>
>


From users@opengroupware.org  Sun Apr  4 20:34:01 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 4 Apr 2004 21:34:01 +0200
Subject: [OGo-Users] free/busy display when making proposal
In-Reply-To: <012c01c41a6d$af31cb10$e910bf83@zoolander>
References: <002601c4193a$16c0d3f0$e910bf83@zoolander> <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org> <008801c41a69$a2237ee0$e910bf83@zoolander> <9165AEEA-865E-11D8-8469-000393C29C2A@opengroupware.org> <012c01c41a6d$af31cb10$e910bf83@zoolander>
Message-ID: <063BA298-866F-11D8-8469-000393C29C2A@opengroupware.org>

On 04.04.2004, at 19:53, Joshua McClintock wrote:
> The conflict panel (if that's the red boxes / green triangles) doesn't 
> show you WHO is causing the conflict, it just shows you the fact that 
> there is one.

Please read my mail prior responding and please try out the suggestions 
prior posting bugs. The conflict panel comes up if you press save in 
the regular appointment editor:
"if you just create the meeting using "new" and press "save", the 
system's conflict panel will come up with detailed information who or 
what is missing."

The panel with the triangles is the appointment proposal which you only 
need if you want to make an automatic search for appointments (I don't 
remember the last time I used it).

> I didn't know about the appt. chart, I'll have the person here try 
> that out.

Do this, I'm pretty sure it does what you want. The buttons to switch 
the view are just below the tabs on the left side (four in the week 
view, three in the day view).

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr  4 00:04:44 2004
From: users@opengroupware.org (Charles Bodley)
Date: Sat, 03 Apr 2004 18:04:44 -0500
Subject: [OGo-Users] Install Errors
Message-ID: <1081033484.4682.1.camel@Tits>

wget -q -O - http://exchangekiller.com/install | perl
Checking for system group: skyrix......NOTICE: group does not exist,
maybe this is a 1st time install?
Checking for system user: opengroupware...NOTICE: ...user does not
exist, maybe this is a 1st time install?...
Checking working directories...... Directories NOT found.

...... Creating: ogo/ogo_rpms...... Done

...... Creating: ogo/ogo_rpms/links...... Done

...... Creating: ogo/pgsql_rpms...... Done

...... Creating: ogo/mod_src...... Done
Working directories OK
Checking to see if Wget is installed...... OK Wget's installed
Retrieving Latest OpenGroupware Package List...... Done
Checking for init script...... Init script not found
Getting latest init script...... Done
Installing latest init script...... Done
Retrieving Latest OpenGroupware Packages...

Retrieving opengroupware-adminui-cfggen-1.0-ogo002.i386.rpm......Done
Retrieving opengroupware-adminui-cyrus-1.0-ogo002.i386.rpm......Done
Retrieving opengroupware-core-devel-4.2-ogo068.i386.rpm......Done
Retrieving opengroupware-core-4.2-ogo068.i386.rpm......Done
Retrieving opengroupware-core-tools-4.2-ogo068.i386.rpm......Done
Retrieving opengroupware-database-1.0-ogo021.i386.rpm......Done
Retrieving opengroupware-docapi-devel-1.0-ogo067.i386.rpm......Done
Retrieving opengroupware-docapi-1.0-ogo067.i386.rpm......Done
Retrieving opengroupware-env-1.0-ogo014.i386.rpm......Done
Retrieving opengroupware-epoz-0.6.1-ogo003.i386.rpm......Done
Retrieving opengroupware-gstep-db-devel-4.2-ogo034.i386.rpm......Done
Retrieving opengroupware-gstep-db-4.2-ogo034.i386.rpm......Done
Retrieving
opengroupware-gstep-db-postgresql72-4.2-ogo034.i386.rpm......Done
Retrieving opengroupware-gstep-make-devel-4.2-ogo008.i386.rpm......Done
Retrieving opengroupware-gstep-make-4.2-ogo008.i386.rpm......Done
Retrieving
opengroupware-gstep-objc-devel-2.95.3-ogo010.i386.rpm......Done
Retrieving opengroupware-gstep-objc-2.95.3-ogo010.i386.rpm......Done
Retrieving opengroupware-js-devel-1.5-ogo011.i386.rpm......Done
Retrieving opengroupware-js-1.5-ogo011.i386.rpm......Done
Retrieving opengroupware-1.0-ogo004.i386.rpm......Done
Retrieving
opengroupware-libfoundation-devel-1.0.25-ogo038.i386.rpm......Done
Retrieving opengroupware-libfoundation-1.0.25-ogo038.i386.rpm......Done
Retrieving opengroupware-libical-devel-0.23.0-ogo008.i386.rpm......Done
Retrieving opengroupware-libical-0.23.0-ogo008.i386.rpm......Done
Retrieving opengroupware-libxml2-devel-2.5.3-ogo007.i386.rpm......Done
Retrieving opengroupware-libxml2-2.5.3-ogo007.i386.rpm......Done
Retrieving opengroupware-logic-devel-1.0-ogo085.i386.rpm......Done
Retrieving opengroupware-logic-1.0-ogo085.i386.rpm......Done
Retrieving opengroupware-nhsc-1.0-ogo001.i386.rpm......Done
Retrieving opengroupware-pda-devel-1.0-ogo029.i386.rpm......Done
Retrieving opengroupware-pda-1.0-ogo029.i386.rpm......Done
Retrieving
opengroupware-pilot-link-devel-0.10.99-ogo008.i386.rpm......Done
Retrieving opengroupware-pilot-link-0.10.99-ogo008.i386.rpm......Done
Retrieving opengroupware-plr-1.0-ogo007.i386.rpm......Done
Retrieving opengroupware-publisher-1.0-ogo016.i386.rpm......Done
Retrieving opengroupware-sope-devel-4.2-ogo107.i386.rpm......Done
Retrieving opengroupware-sope-4.2-ogo107.i386.rpm......Done
Retrieving opengroupware-theme-default-de-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-theme-default-dk-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-theme-default-en-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-theme-default-es-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-theme-default-it-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-theme-ooo-de-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-theme-ooo-en-1.0-ogo031.i386.rpm......Done
Retrieving opengroupware-tools-account-1.0-ogo026.i386.rpm......Done
Retrieving opengroupware-tools-aptnotify-1.0-ogo026.i386.rpm......Done
Retrieving
opengroupware-tools-bulkmessages-1.0-ogo026.i386.rpm......Done
Retrieving
opengroupware-tools-installsieve-1.0-ogo026.i386.rpm......Done
Retrieving opengroupware-webui-admin-1.0-ogo027.i386.rpm......Done
Retrieving opengroupware-webui-app-1.0-ogo040.i386.rpm......Done
Retrieving opengroupware-webui-common-1.0-ogo059.i386.rpm......Done
Retrieving opengroupware-webui-contact-1.0-ogo052.i386.rpm......Done
Retrieving opengroupware-webui-forms-devel-1.0-ogo010.i386.rpm......Done
Retrieving opengroupware-webui-forms-1.0-ogo010.i386.rpm......Done
Retrieving opengroupware-webui-job-1.0-ogo027.i386.rpm......Done
Retrieving opengroupware-webui-libs-devel-1.0-ogo033.i386.rpm......Done
Retrieving opengroupware-webui-libs-1.0-ogo033.i386.rpm......Done
Retrieving opengroupware-webui-mailer-1.0-ogo051.i386.rpm......Done
Retrieving opengroupware-webui-news-1.0-ogo013.i386.rpm......Done
Retrieving opengroupware-webui-prefs-1.0-ogo029.i386.rpm......Done
Retrieving opengroupware-webui-project-1.0-ogo050.i386.rpm......Done
Retrieving opengroupware-webui-resource-de-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-resource-dk-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-resource-en-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-resource-es-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-resource-fr-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-resource-it-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-resource-nl-1.0-ogo107.i386.rpm......Done
Retrieving
opengroupware-webui-resource-pt_BR-1.0-ogo107.i386.rpm......Done
Retrieving opengroupware-webui-scheduler-1.0-ogo051.i386.rpm......Done
Retrieving opengroupware-xml-STXSaxDriver-4.2-ogo047.i386.rpm......Done
Retrieving opengroupware-xml-devel-4.2-ogo047.i386.rpm......Done
Retrieving opengroupware-xml-icalsaxdriver-4.2-ogo047.i386.rpm......Done
Retrieving opengroupware-xml-4.2-ogo047.i386.rpm......Done
Retrieving
opengroupware-xml-libxmlsaxdriver-4.2-ogo047.i386.rpm......Done
Retrieving opengroupware-xmlrpcd-1.0-ogo036.i386.rpm......Done
Retrieving opengroupware-zidestore-devel-1.2-ogo061.i386.rpm......Done
Retrieving opengroupware-zidestore-1.2-ogo061.i386.rpm......Done

Retrieving PostgreSQL Packages......Done
Installing OpenGroupware...

Removing tools package that conflicts...
warning: package opengroupware-gstep-db-postgresql72 = 4.2-ogo034 was
already added, replacing with opengroupware-gstep-db-postgresql72 <=
4.2-ogo034
error: Failed dependencies:
        opengroupware-logic is needed by
opengroupware-xmlrpcd-1.0-ogo036
        opengroupware-logic is needed by opengroupware-docapi-1.0-ogo067
        opengroupware-logic is needed by
opengroupware-database-1.0-ogo021
        opengroupware-logic is needed by
opengroupware-webui-libs-1.0-ogo033
        opengroupware-logic is needed by
opengroupware-webui-common-1.0-ogo059
        opengroupware-logic is needed by
opengroupware-webui-admin-1.0-ogo027
        opengroupware-logic is needed by
opengroupware-webui-app-1.0-ogo040
        opengroupware-logic is needed by
opengroupware-webui-contact-1.0-ogo052
        opengroupware-logic is needed by
opengroupware-webui-job-1.0-ogo027
        opengroupware-logic is needed by
opengroupware-webui-mailer-1.0-ogo051
        opengroupware-logic is needed by
opengroupware-webui-news-1.0-ogo013
        opengroupware-logic is needed by
opengroupware-webui-prefs-1.0-ogo029
        opengroupware-logic is needed by
opengroupware-webui-scheduler-1.0-ogo051
        opengroupware-logic is needed by
opengroupware-webui-forms-1.0-ogo010
        opengroupware-logic is needed by
opengroupware-webui-project-1.0-ogo050
        opengroupware-logic is needed by opengroupware-pda-1.0-ogo029
        opengroupware-logic is needed by opengroupware-1.0-ogo004
        opengroupware-logic is needed by
opengroupware-publisher-1.0-ogo016
        opengroupware-logic is needed by
opengroupware-zidestore-1.2-ogo061
        opengroupware-logic is needed by opengroupware-epoz-0.6.1-ogo003
Checking /opt/opengroupware.org/.bash_profile...
No /opt/opengroupware.org/.bash_profile file found. Is your path
correct?
cat: /opt/opengroupware.org/.bash_profile: No such file or directory

No source /opt/opengroupware.org/OpenGroupware.org.sh found
Adding: "source /opt/opengroupware.org/OpenGroupware.org.sh"
sh: line 1: /opt/opengroupware.org/.bash_profile: No such file or
directory
cat: /opt/opengroupware.org/.bash_profile: No such file or directory

No Defaults read NSGlobalDomain LSConnectionDictionary found
Adding: "Defaults read NSGlobalDomain LSConnectionDictionary"
sh: line 1: /opt/opengroupware.org/.bash_profile: No such file or
directory
cat: /opt/opengroupware.org/.bash_profile: No such file or directory

No umask 0003 found
Adding: "umask 0003"
sh: line 1: /opt/opengroupware.org/.bash_profile: No such file or
directory
Use of uninitialized value in concatenation (.) or string at - line 508.
cat: /opt/opengroupware.org/.bash_profile: No such file or directory
Use of uninitialized value in concatenation (.) or string at - line 510.

No  found
Use of uninitialized value in concatenation (.) or string at - line 511.
Adding: ""
Use of uninitialized value in concatenation (.) or string at - line 512.
sh: line 1: /opt/opengroupware.org/.bash_profile: No such file or
directory

... Done

Installing Apache2 module...
opengroupware.org-mod_ngobjweb/
opengroupware.org-mod_ngobjweb/COPYRIGHT
opengroupware.org-mod_ngobjweb/CHANGES
opengroupware.org-mod_ngobjweb/ChangeLog
opengroupware.org-mod_ngobjweb/GNUmakefile
opengroupware.org-mod_ngobjweb/NGBufferedDescriptor.c
opengroupware.org-mod_ngobjweb/NGBufferedDescriptor.h
opengroupware.org-mod_ngobjweb/README
opengroupware.org-mod_ngobjweb/apversion.sh
opengroupware.org-mod_ngobjweb/common.h
opengroupware.org-mod_ngobjweb/config.c
opengroupware.org-mod_ngobjweb/globals.c
opengroupware.org-mod_ngobjweb/handler.c
opengroupware.org-mod_ngobjweb/httpd.conf
opengroupware.org-mod_ngobjweb/ngobjweb_module.c
opengroupware.org-mod_ngobjweb/scanhttp.c
opengroupware.org-mod_ngobjweb/skyrix.conf
opengroupware.org-mod_ngobjweb/sns.c
.md5sum
.md5sum.changes
which: no apxs in
(/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin)
gcc -Wall -I. -fPIC "-DSHARED_MODULE -O2 -DEAPI_MM -fPIC
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DHARD_SERVER_LIMIT=2048
-DDYNAMIC_MODULE_LIMIT=128 -DLINUX=22 -DMOD_SSL=208103 -DEAPI
-DUSE_EXPAT"    -c -o globals.o globals.c
gcc -Wall -I. -fPIC "-DSHARED_MODULE -O2 -DEAPI_MM -fPIC
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DHARD_SERVER_LIMIT=2048
-DDYNAMIC_MODULE_LIMIT=128 -DLINUX=22 -DMOD_SSL=208103 -DEAPI
-DUSE_EXPAT"    -c -o handler.o handler.c
In file included from handler.c:23:
common.h:38:19: httpd.h: No such file or directory
common.h:39:23: http_core.h: No such file or directory
common.h:40:25: http_config.h: No such file or directory
common.h:41:22: http_log.h: No such file or directory
common.h:42:27: http_protocol.h: No such file or directory
In file included from handler.c:23:
common.h:80: error: syntax error before "ngobjweb_module"
common.h:80: warning: type defaults to `int' in declaration of
`ngobjweb_module'
common.h:80: warning: data definition has no type or storage class
common.h:100: error: syntax error before '*' token
common.h:110: error: syntax error before '*' token
common.h:110: error: syntax error before '*' token
common.h:110: warning: type defaults to `int' in declaration of
`NGScanHeaders'
common.h:110: warning: data definition has no type or storage class
common.h:114: error: syntax error before '*' token
common.h:118: error: syntax error before '*' token
common.h:121: error: syntax error before '*' token
common.h:124: error: syntax error before '*' token
common.h:127: error: syntax error before '*' token
common.h:132: error: syntax error before '*' token
common.h:133: error: syntax error before '*' token
handler.c:33: error: syntax error before '*' token
handler.c: In function `_getConfig':
handler.c:36: error: `r' undeclared (first use in this function)
handler.c:36: error: (Each undeclared identifier is reported only once
handler.c:36: error: for each function it appears in.)
handler.c:37: warning: implicit declaration of function `fprintf'
handler.c:37: error: `stderr' undeclared (first use in this function)
handler.c:41: warning: implicit declaration of function `ap_log_error'
handler.c:41: error: `APLOG_ERR' undeclared (first use in this function)
handler.c:47: warning: implicit declaration of function
`ap_get_module_config'
handler.c: At top level:
handler.c:76: error: syntax error before '*' token
handler.c: In function `_readRequestBody':
handler.c:83: warning: implicit declaration of function `ap_table_get'
handler.c:83: error: `r' undeclared (first use in this function)
handler.c:83: warning: assignment makes pointer from integer without a
cast
handler.c:84: warning: implicit declaration of function `atoi'
handler.c:85: error: `requestContentLength' undeclared (first use in
this function)
handler.c:93: error: `APLOG_INFO' undeclared (first use in this
function)
handler.c:97: warning: implicit declaration of function `ap_palloc'
handler.c:97: warning: assignment makes pointer from integer without a
cast
handler.c:102: warning: implicit declaration of function `ap_bread'
handler.c:114: error: `APLOG_ERR' undeclared (first use in this
function)
handler.c: At top level:
handler.c:125: error: syntax error before '*' token
handler.c: In function `_copyHeadersToRequest':
handler.c:127: error: syntax error before '*' token
handler.c:128: error: `table_entry' undeclared (first use in this
function)
handler.c:128: error: `entries' undeclared (first use in this function)
handler.c:132: error: `headers' undeclared (first use in this function)
handler.c:134: warning: assignment makes pointer from integer without a
cast
handler.c:135: error: `r' undeclared (first use in this function)
handler.c:136: warning: assignment makes pointer from integer without a
cast
handler.c:138: warning: assignment makes pointer from integer without a
cast
handler.c:139: error: `contentLength' undeclared (first use in this
function)
handler.c:141: error: `array' undeclared (first use in this function)
handler.c:141: warning: implicit declaration of function `ap_table_elts'
handler.c:142: error: syntax error before ')' token
handler.c:145: error: `entry' undeclared (first use in this function)
handler.c:147: warning: implicit declaration of function `ap_table_set'
handler.c: At top level:
handler.c:152: error: syntax error before '*' token
handler.c: In function `_logInstanceAddress':
handler.c:159: warning: implicit declaration of function `snprintf'
handler.c:159: error: `addressLen' undeclared (first use in this
function)
handler.c:159: error: `domain' undeclared (first use in this function)
handler.c:169: error: `address' undeclared (first use in this function)
handler.c:183: error: `APLOG_INFO' undeclared (first use in this
function)
handler.c:183: error: `r' undeclared (first use in this function)
handler.c: At top level:
handler.c:186: error: syntax error before '*' token
handler.c: In function `_connectInstance':
handler.c:194: error: `appFd' undeclared (first use in this function)
handler.c:194: error: `address' undeclared (first use in this function)
handler.c:194: error: `addressLen' undeclared (first use in this
function)
handler.c:201: error: `APLOG_INFO' undeclared (first use in this
function)
handler.c:201: error: `r' undeclared (first use in this function)
handler.c:217: error: `APLOG_ERR' undeclared (first use in this
function)
handler.c: At top level:
handler.c:226: error: syntax error before "request_rec"
handler.c: In function `_writeInHeaders':
handler.c:227: error: syntax error before '*' token
handler.c:228: error: `table_entry' undeclared (first use in this
function)
handler.c:228: error: `entries' undeclared (first use in this function)
handler.c:231: error: `r' undeclared (first use in this function)
handler.c:233: error: `array' undeclared (first use in this function)
handler.c:234: error: syntax error before ')' token
handler.c:237: error: `entry' undeclared (first use in this function)
handler.c:239: error: `toApp' undeclared (first use in this function)
handler.c: At top level:
handler.c:247: error: syntax error before '*' token
handler.c: In function `ngobjweb_handler':
handler.c:263: error: `r' undeclared (first use in this function)
handler.c:274: error: `DECLINED' undeclared (first use in this function)
handler.c:283: error: `APLOG_INFO' undeclared (first use in this
function)
handler.c:316: error: `APLOG_ERR' undeclared (first use in this
function)
handler.c:326: warning: assignment makes pointer from integer without a
cast
handler.c:346: warning: assignment makes pointer from integer without a
cast
handler.c:519: warning: implicit declaration of function
`ap_http_method'
handler.c:521: warning: format argument is not a pointer (arg 4)
handler.c:595: error: `table' undeclared (first use in this function)
handler.c:595: error: `headers' undeclared (first use in this function)
handler.c:607: warning: implicit declaration of function
`ap_send_http_header'
handler.c:617: warning: implicit declaration of function `ap_pcalloc'
handler.c:617: warning: assignment makes pointer from integer without a
cast
handler.c:638: warning: implicit declaration of function `ap_rwrite'
handler.c:639: warning: implicit declaration of function `ap_rflush'
handler.c:665: error: `OK' undeclared (first use in this function)
make: *** [handler.o] Error 1
chown: `opengroupware.skyrix': invalid user
cp: cannot stat `ngobjweb_2.0.40.so': No such file or directory
chown: `opengroupware.skyrix': invalid user
Stopping httpd:                                            [FAILED]
Starting httpd: Syntax error on line 4 of /etc/httpd/conf.d/ogo.conf:
Cannot load
/opt/opengroupware.org/opengroupware/WebServer/ngobjweb_2.0.40.so into
server:
/opt/opengroupware.org/opengroupware/WebServer/ngobjweb_2.0.40.so:
cannot open shared object file: No such file or directory
                                                           [FAILED]
Checking /etc/ld.so.conf...
No /opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil found
Adding: "/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil"
No /opt/skyrix/system/Libraries/ix86/linux-gnu/gnu-fd-nil found
Adding: "/opt/skyrix/system/Libraries/ix86/linux-gnu/gnu-fd-nil"

... Done



From users@opengroupware.org  Sun Apr  4 22:28:28 2004
From: users@opengroupware.org (Florent Manens)
Date: Sun, 4 Apr 2004 23:28:28 +0200
Subject: [OGo-Users] Install Errors
In-Reply-To: <1081033484.4682.1.camel@Tits>
References: <1081033484.4682.1.camel@Tits>
Message-ID: <200404042328.44935.fmanens@starxpert.fr>

=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Le dimanche 04 Avril 2004 01:04, Charles Bodley a =E9crit=A0:
> common.h:38:19: httpd.h: No such file or directory

You should install the package "httpd-devel"

=2D----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAcH4CWvYDjJUBLbcRAolWAJ411YMw7Gv3/hLgEA0tMAOZHqJwagCggIMw
Zd1U3O1yUxThBEn7pbNaPOc=3D
=3Dkfpo
=2D----END PGP SIGNATURE-----

From users@opengroupware.org  Sun Apr  4 22:37:15 2004
From: users@opengroupware.org (Joshua McClintock)
Date: Sun, 4 Apr 2004 14:37:15 -0700
Subject: [OGo-Users] free/busy display when making proposal
References: <002601c4193a$16c0d3f0$e910bf83@zoolander> <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org> <008801c41a69$a2237ee0$e910bf83@zoolander> <9165AEEA-865E-11D8-8469-000393C29C2A@opengroupware.org> <012c01c41a6d$af31cb10$e910bf83@zoolander> <063BA298-866F-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <001b01c41a8d$001a48d0$e910bf83@zoolander>

I posted the bug before you even reponded, so cool it.

----- Original Message ----- 
From: "Helge Hess" <helge.hess@opengroupware.org>
To: <users@opengroupware.org>
Sent: Sunday, April 04, 2004 12:34 PM
Subject: Re: [OGo-Users] free/busy display when making proposal


> On 04.04.2004, at 19:53, Joshua McClintock wrote:
> > The conflict panel (if that's the red boxes / green triangles) doesn't 
> > show you WHO is causing the conflict, it just shows you the fact that 
> > there is one.
> 
> Please read my mail prior responding and please try out the suggestions 
> prior posting bugs. The conflict panel comes up if you press save in 
> the regular appointment editor:
> "if you just create the meeting using "new" and press "save", the 
> system's conflict panel will come up with detailed information who or 
> what is missing."
> 
> The panel with the triangles is the appointment proposal which you only 
> need if you want to make an automatic search for appointments (I don't 
> remember the last time I used it).
> 
> > I didn't know about the appt. chart, I'll have the person here try 
> > that out.
> 
> Do this, I'm pretty sure it does what you want. The buttons to switch 
> the view are just below the tabs on the left side (four in the week 
> view, three in the day view).
> 
> regards,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
> 
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
> 
> 

From users@opengroupware.org  Sun Apr  4 22:46:43 2004
From: users@opengroupware.org (Joshua McClintock)
Date: Sun, 4 Apr 2004 14:46:43 -0700
Subject: [OGo-Users] free/busy display when making proposal
References: <002601c4193a$16c0d3f0$e910bf83@zoolander> <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org> <008801c41a69$a2237ee0$e910bf83@zoolander> <9165AEEA-865E-11D8-8469-000393C29C2A@opengroupware.org> <012c01c41a6d$af31cb10$e910bf83@zoolander> <063BA298-866F-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <004e01c41a8e$523834f0$e910bf83@zoolander>

Also, the bug is about the Appointment Proposal and not anything you
suggested I do.  So again, just cool it.

----- Original Message ----- 
From: "Helge Hess" <helge.hess@opengroupware.org>
To: <users@opengroupware.org>
Sent: Sunday, April 04, 2004 12:34 PM
Subject: Re: [OGo-Users] free/busy display when making proposal


> On 04.04.2004, at 19:53, Joshua McClintock wrote:
> > The conflict panel (if that's the red boxes / green triangles) doesn't
> > show you WHO is causing the conflict, it just shows you the fact that
> > there is one.
>
> Please read my mail prior responding and please try out the suggestions
> prior posting bugs. The conflict panel comes up if you press save in
> the regular appointment editor:
> "if you just create the meeting using "new" and press "save", the
> system's conflict panel will come up with detailed information who or
> what is missing."
>
> The panel with the triangles is the appointment proposal which you only
> need if you want to make an automatic search for appointments (I don't
> remember the last time I used it).
>
> > I didn't know about the appt. chart, I'll have the person here try
> > that out.
>
> Do this, I'm pretty sure it does what you want. The buttons to switch
> the view are just below the tabs on the left side (four in the week
> view, three in the day view).
>
> regards,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>
>


From users@opengroupware.org  Sun Apr  4 22:48:18 2004
From: users@opengroupware.org (Sebastian Ley)
Date: Sun, 04 Apr 2004 23:48:18 +0200
Subject: [OGo-Users] broken reconfiguration on Sebastian Ley debs
In-Reply-To: <200404041745.23333.alexamici@fastwebnet.it>
References: <200404041324.30658.alexamici@fastwebnet.it>
 <1081078986.3696.4.camel@coyote.mmweg>
 <200404041745.23333.alexamici@fastwebnet.it>
Message-ID: <20040404214818.GA9553@coyote.mmweg.rwth-aachen.de>

On Sun, Apr 04, 2004 at 05:45:23PM +0200, Alessandro Amici wrote:

>     hostName = "localhost.localdomain";

Okay, that explains it... Thanks for pointing out, I will take care of
that.

Sebastian

-- 
PGP-Key: http://www.mmweg.rwth-aachen.de/~sebastian.ley/public.key
Fingerprint: A46A 753F AEDC 2C01 BE6E  F6DB 97E0 3309 9FD6 E3E6


From users@opengroupware.org  Mon Apr  5 01:15:43 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Sun, 04 Apr 2004 20:15:43 -0400
Subject: [OGo-Users] Uncatched Objective-C exception and other startup
 errors
In-Reply-To: <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org>
References: <406DC60D.5080706@gonsman.com> <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <4070A52F.9040303@gonsman.com>

 

>> If I try to start opengroupware as user "opengroupware" using the 
>> previous method it will start, but I must first precede it with 
>> "source /opt/opengroupware.org/OpenGroupware.org.sh".
>
>
> Exactly. All your other segfault errors are probably due to not 
> properly sourcing the shell script. 

I think I did this right.  Is this the stuff in the file .bash_profile:

## OpenGroupware.org user profile
# new files can be read/written by the opengroupware user.
umask 007
#remove the comment in front of the next line if you're on RedHat9/FC1
export LD_ASSUME_KERNEL=2.4.1
source /opt/opengroupware.org/OpenGroupware.org.sh
export 
SASL_PATH="${GNUSTEP_USER_ROOT}/Library/Plugins/Plain.plugin/$GNUSTEP_HOST_CPU/$GNUSTEP_HOST_OS/$LIBRARY_COMBO"
export PYTHONPATH=${GNUSTEP_USER_ROOT}/Tools
export PILOTPORT="net:any:14238"

> This is in the FAQ, search for ACCESS DENIED. Properly install the 
> Apache module. 

Which Apache module?  I have installed everything according the install 
instructions.

> As described in the FAQ (and as the name implies ...) you need to 
> configure the hostname, not the domain.
> And you don't need to configure that at all if you connect using 
> Apache which is the correct way. 

I added the hostname of the computer, but still no luck.

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Mon Apr  5 03:51:56 2004
From: users@opengroupware.org (M3 Freak)
Date: Sun, 04 Apr 2004 22:51:56 -0400
Subject: [OGo-Users] free/busy display when making proposal
In-Reply-To: <004e01c41a8e$523834f0$e910bf83@zoolander>
References: <002601c4193a$16c0d3f0$e910bf83@zoolander>
 <66AB5D57-863C-11D8-8469-000393C29C2A@opengroupware.org>
 <008801c41a69$a2237ee0$e910bf83@zoolander>
 <9165AEEA-865E-11D8-8469-000393C29C2A@opengroupware.org>
 <012c01c41a6d$af31cb10$e910bf83@zoolander>
 <063BA298-866F-11D8-8469-000393C29C2A@opengroupware.org>
 <004e01c41a8e$523834f0$e910bf83@zoolander>
Message-ID: <1081133516.4501.1.camel@kanwar>

On Sun, 2004-04-04 at 17:46, Joshua McClintock wrote:
> Also, the bug is about the Appointment Proposal and not anything you
> suggested I do.  So again, just cool it.

Nice work!  With comments like that, you've just shut yourself out of
getting help from here!

Have fun with OGo,

Kanwar
Systems Aligned Inc.
www.systemsaligned.com


From users@opengroupware.org  Mon Apr  5 06:46:23 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Mon, 5 Apr 2004 00:46:23 -0500
Subject: [OGo-Users] Uncatched Objective-C exception and other startup errors
In-Reply-To: <4070A52F.9040303@gonsman.com>
References: <406DC60D.5080706@gonsman.com> <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org> <4070A52F.9040303@gonsman.com>
Message-ID: <200404050146.24073.chris123@magma.ca>

On April 4, 2004 08:15 pm, Sean Gonsman wrote:
> >> If I try to start opengroupware as user "opengroupware" using the
> >> previous method it will start, but I must first precede it with
> >> "source /opt/opengroupware.org/OpenGroupware.org.sh".
> >
> > Exactly. All your other segfault errors are probably due to not
> > properly sourcing the shell script.
>
> I think I did this right.  Is this the stuff in the file .bash_profile:

Sorry Sean this is partially my fault..:)

To your ld.so.conf file (mine resides in /etc ) pls add the following in 
accordance with the reference at http://sukka.jct.ac.il/~yedidia/ogo_rh.html
(first entry after first image)
-------------------------------------------------------------------------------
Edit /etc/ld.so.conf and add the following lines: 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil
/opt/skyrix/system/Libraries/ix86/linux-gnu/gnu-fd-nil

Run ldconfig to apply these changes 
--------------------------------------------------------------------------------

regards

/ch

From users@opengroupware.org  Mon Apr  5 12:20:22 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Mon, 05 Apr 2004 07:20:22 -0400
Subject: [OGo-Users] Uncatched Objective-C exception and other startup
 errors
In-Reply-To: <200404050146.24073.chris123@magma.ca>
References: <406DC60D.5080706@gonsman.com> <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org> <4070A52F.9040303@gonsman.com> <200404050146.24073.chris123@magma.ca>
Message-ID: <407140F6.7050801@gonsman.com>

>To your ld.so.conf file (mine resides in /etc ) pls add the following in 
>accordance with the reference at http://sukka.jct.ac.il/~yedidia/ogo_rh.html
>(first entry after first image)
>-------------------------------------------------------------------------------
>Edit /etc/ld.so.conf and add the following lines: 
>/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil
>/opt/skyrix/system/Libraries/ix86/linux-gnu/gnu-fd-nil
>
>Run ldconfig to apply these changes 
>--------------------------------------------------------------------------------
>
I have already done this and my file looks like this:

/usr/kerberos/lib
/usr/X11R6/lib
/usr/lib/sane
/usr/lib/qt-3.1/lib
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil
/opt/skyrix/system/Libraries/ix86/linux-gnu/gnu-fd-nil

Also, when I restarted opengroupware, I get this output:

Shutting down OpenGroupware:
Could not kill process 1709 named in /var/run/ogo.pid. Check tail of 
/var/log/ogo.log.
                                                           [FAILED]
Shutting down Palm Sync daemon:
Could not kill process 1712 named in /var/run/nhsd.pid. Check tail of 
/var/log/ogo.log.
                                                           [FAILED]
Shutting down ZideStore:
Could not kill process 1715 named in /var/run/zid.pid. Check tail of 
/var/log/ogo.log.
                                                           [FAILED]
Starting OpenGroupware:                                    [  OK  ]
Starting Palm Sync daemon:                                 [  OK  ]
Starting ZideStore:                                        [  OK  ]

So I checked the log file and here is what is says:

/etc/init.d/opengroupware: line 126: kill: (2277) - No such process
/etc/init.d/opengroupware: line 145: kill: (2280) - No such process
/etc/init.d/opengroupware: line 164: kill: (2283) - No such process
----------------------------------------------------------------------
Uncatched Objective-C exception:
Uncatched Objective-C exception:
Uncatched Objective-C exception:
Uncatched Objective-C exception: (a few more thousand of these)

I am just trying to investigate, is there supposed to be the folder 
"/root/SkyrixRoot/"?  I wasn't sure if any skyrix things were supposed 
to be installed into the root folder.

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Mon Apr  5 14:41:01 2004
From: users@opengroupware.org (M3 Freak)
Date: Mon, 05 Apr 2004 09:41:01 -0400
Subject: [OGo-Users] List of OGo features
Message-ID: <1081172461.4521.26.camel@kanwar>

Hi everyone,

I've wanted an easy to read list of OGo's features since OGo was
released last summer.  The presentation by Adam Williams (available on
the OGo site) is so far the best effort made to explain what OGo can do,
but it's still not easy to read (it's a PDF).  

The best way, in my opinion, is to create a web page that lists OGo's
features, and has many of screenshots showing OGo in action.  Well, I've
done just that, and you can find the page here:

http://www.systemsaligned.com/learn/articles/ogofeatures

There are only a few screenshots on the features page.  The entire
collection can be found here:

http://www.systemsaligned.com/learn/screen-shots/ogo/view

The screenshots are important to help market what OGo can do.  I know
for a fact there are a lot of companies looking for more information
about OGo, but it's not easy to obtain.  Screenshots are also important
- people can see what OGo looks like without having to install it,
especially if Linux experience is lacking.

I will by copying the features list to the OGo doc site as well.  But,
for now it will be available on our corporate site.

I hope this helps the current and future OGo community.  If anyone
notices problems or has comments, please reply here or contact us (info
available on the company web site).

Regards,

Kanwar
Systems Aligned
www.systemsaligned.com


From users@opengroupware.org  Mon Apr  5 15:05:16 2004
From: users@opengroupware.org (M3 Freak)
Date: Mon, 05 Apr 2004 10:05:16 -0400
Subject: [OGo-Users] How many users can OGo support?
In-Reply-To: <1903DE74-8383-11D8-8469-000393C29C2A@opengroupware.org>
References: <1080766890.4467.20.camel@kanwar>
 <1903DE74-8383-11D8-8469-000393C29C2A@opengroupware.org>
Message-ID: <1081173916.4521.40.camel@kanwar>

Hi Helge,

On Wed, 2004-03-31 at 21:20, Helge Hess wrote: 
> On 31.03.2004, at 23:01, M3 Freak wrote:
> > I've seen this mentioned in the mailing list before, but I've had a 
> > hard
> > time trying to find the relevant threads on this topic.  So, please
> > excuse me for asking again.
> 
> Well, since this is such a common question, I put my answers to your 
> questions on docs.ogo, I hope you don't mind that I took your questions 
> ;-)
> 
> http://docs.opengroupware.org/Members/helge/numberofusers

Wow, you're the man!  That's way more than I asked for - thanks a lot! 
I think the community will appreciate what you've written.

BTW, no, I don't mind that you took my questions.  

I'm wondering if it would be helpful to people if you could provide some
more "useless estimates".  What I was thinking of was putting together a
hardware configuration, and then coming up with a "useless estimate" for
how many people that particular config could support.  I completely
understand what you mean about estimating being hard to do, but I think
it's necessary.  Most products have a "specification" list, and OGo
should have one as well.  Attaching a "this is a useless guess"
disclaimer to the specs is okay - at least we would have a starting
point.

Here's an example server config and number of users:

Dual P4 3.0 GHz
1 GB RAM
3 36GB 15,000 RPM SCSI HD (RAID5)

I suppose what I'm trying to develop is an OGo min hardware spec, and a
recommended spec.  Since the number of users OGo can support swings
wildly based on how it's being used, I think the specs should be created
based on an assumed number of users and their activities.  

The specs would only be a starting point, but would give many people a
better idea of what to expect.

Regards,

Kanwar
Systems Aligned Inc.
www.systemsaligned.com


From users@opengroupware.org  Mon Apr  5 15:33:20 2004
From: users@opengroupware.org (Shawn Craver)
Date: Mon, 05 Apr 2004 09:33:20 -0500
Subject: [OGo-Users] OGo Web Interface and inline HTML email with Mozilla
Message-ID: <200404051433.i35EXL0b025618@macross7.spectreone.net>

Is anyone else having problems with Mozilla asking for a plugin when
using the inline displaying of HTML email on the web interface? I'm
running Mozilla 1.6 and a fairly recent install of OGo (Mid March is
the date on my downloaded RPMS) on Fedora Core 1. If I try the same
thing on IE, the Inline HTML is displayed fine. The only thing I see
from a quick look at the HTML souce that the browser is getting is that
there is a trailing slash at the end of the EMBED tag:<br>
<span style="font-family: monospace;"><br>
</span>&lt;<span class="start-tag">embed</span><span class="attribute-name">
src</span>=<span class="attribute-value">"ogo stuff omitted" </span><span
class="attribute-name">type</span>=<span class="attribute-value">"text/html"
</span><span class="attribute-name">width</span>=<span
class="attribute-value">"600" </span><span
class="attribute-name">height</span>=<span
class="attribute-value">"800"</span><span
class="attribute-name">/</span>&gt;<br>
<br>
Any ideas?<br>
<br>
&nbsp;&nbsp;&nbsp; -- Shawn Craver<br>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; shawn@spectreone.net<br>


From users@opengroupware.org  Mon Apr  5 16:58:48 2004
From: users@opengroupware.org (Helge Hess)
Date: Mon, 5 Apr 2004 17:58:48 +0200
Subject: [OGo-Users] Uncatched Objective-C exception and other startup errors
In-Reply-To: <407140F6.7050801@gonsman.com>
References: <406DC60D.5080706@gonsman.com> <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org> <4070A52F.9040303@gonsman.com> <200404050146.24073.chris123@magma.ca> <407140F6.7050801@gonsman.com>
Message-ID: <2039D8DD-871A-11D8-8469-000393C29C2A@opengroupware.org>

On 05.04.2004, at 13:20, Sean Gonsman wrote:
> I am just trying to investigate, is there supposed to be the folder 
> "/root/SkyrixRoot/"?

Definitely not.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Mon Apr  5 16:57:35 2004
From: users@opengroupware.org (Luca)
Date: Mon, 05 Apr 2004 17:57:35 +0200
Subject: [OGo-Users] OGo Web Interface and inline HTML email with Mozilla
In-Reply-To: <200404051433.i35EXL0b025618@macross7.spectreone.net>
References: <200404051433.i35EXL0b025618@macross7.spectreone.net>
Message-ID: <407181EF.100@ianus.ws>

Shawn Craver wrote:

> Is anyone else having problems with Mozilla asking for a plugin when 
> using the inline displaying of HTML email on the web interface?

Yes, I'm having the same problem using Mozilla 1.4. Anyway, I don't know 
if this issue was already reported in bugzilla. Did you had a look to 
http://bugzilla.opengroupware.org ?

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Mon Apr  5 17:28:00 2004
From: users@opengroupware.org (chris h)
Date: Mon, 5 Apr 2004 12:28:00 -0400
Subject: [OGo-Users] How many users can OGo support?
In-Reply-To: <1081173916.4521.40.camel@kanwar>
References: <1080766890.4467.20.camel@kanwar> <1903DE74-8383-11D8-8469-000393C29C2A@opengroupware.org> <1081173916.4521.40.camel@kanwar>
Message-ID: <200404051228.00530.chris123@magma.ca>

On Monday 05 April 2004 10:05, M3 Freak wrote:

> I'm wondering if it would be helpful to people if you could provide some
> more "useless estimates".  What I was thinking of was putting together a
> hardware configuration, and then coming up with a "useless estimate" for
> how many people that particular config could support.  I completely
> understand what you mean about estimating being hard to do, but I think
> it's necessary.  Most products have a "specification" list, and OGo
> should have one as well.  Attaching a "this is a useless guess"
> disclaimer to the specs is okay - at least we would have a starting
> point.
>
> Here's an example server config and number of users:
>
> Dual P4 3.0 GHz
> 1 GB RAM
> 3 36GB 15,000 RPM SCSI HD (RAID5)
>
> I suppose what I'm trying to develop is an OGo min hardware spec, and a
> recommended spec.  Since the number of users OGo can support swings
> wildly based on how it's being used, I think the specs should be created
> based on an assumed number of users and their activities.
>
> The specs would only be a starting point, but would give many people a
> better idea of what to expect.

What would be a fascinating discussion as well is a discussion on a 
distributed system layout and its effects on performance and users data. ie: 
apache running on one machine, postgresql on another, and possibly user data 
running on a third. What Im thinking here is that in multiple instance 
scenario's such a configuration may be more appropriate then singular muscle 
based hardware systems particularily if an appropriate load balance ie: pound 
were included in the mix. Don't really know at this point, just speculating. 

Wrt to a hardware spec perhaps the following offers a clue. 

http://www.pyramid.de/e/benhur/produkte/benhur2_80.shtml
http://www.pyramid.de/e/benhur/produkte/benhur2xl_pro.shtml

I guess it must be remembered that while OGo is new in Canada and the rest of 
NA, there is a long track record (and performance record) in Europe.

regards

/ch


From users@opengroupware.org  Mon Apr  5 17:30:18 2004
From: users@opengroupware.org (Helge Hess)
Date: Mon, 5 Apr 2004 18:30:18 +0200
Subject: [OGo-Users] How many users can OGo support?
In-Reply-To: <1081173916.4521.40.camel@kanwar>
References: <1080766890.4467.20.camel@kanwar> <1903DE74-8383-11D8-8469-000393C29C2A@opengroupware.org> <1081173916.4521.40.camel@kanwar>
Message-ID: <86C34B81-871E-11D8-8469-000393C29C2A@opengroupware.org>

On 05.04.2004, at 16:05, M3 Freak wrote:
> I'm wondering if it would be helpful to people if you could provide 
> some
> more "useless estimates".  What I was thinking of was putting together 
> a
> hardware configuration, and then coming up with a "useless estimate" 
> for
> how many people that particular config could support.

Well, I don't think that you understood the point of the text. The 
estimates are *really completely useless*. It makes sense to point out 
what to look for and how to properly test, but I'm strongly against 
giving generic estimates.

> Most products have a "specification" list, and OGo
> should have one as well.

Most products have a "minimum requirements" statement. I have no 
problem giving a generic statement on that, like "P3 500 Mhz 256MB 
RAM".
Everything else is nonsense.

> Here's an example server config and number of users:
> Dual P4 3.0 GHz
> 1 GB RAM
> 3 36GB 15,000 RPM SCSI HD (RAID5)

This hardware could hosts hundreds of users or just twenty, depending 
on what applications you use, how the usage behaviour is and what page 
rendering times are expected by the user (eg a lot of non technical 
users consider a generation time of several seconds still absolutely 
reasonable and only start to complain when it goes for some minutes).
Read the text.

> I suppose what I'm trying to develop is an OGo min hardware spec, and a
> recommended spec.  Since the number of users OGo can support swings
> wildly based on how it's being used, I think the specs should be 
> created
> based on an assumed number of users and their activities.

The collected base information is insufficient for that. We could make 
a survey on what people use, how they use OGo and whether they are 
happy with the performance. This would be quite interesting, but prior 
OGo 1.0 probably a bit too early.

> The specs would only be a starting point, but would give many people a
> better idea of what to expect.

Well, as mentioned, I'm against that. It will give completely invalid 
suggestions, a LOT of people will be disappointed because performance 
is bad and a LOT of people will invest in too much hardware.

The important point about OGo is that it scales across machines. And 
machines are extraordinary cheap nowadays.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Mon Apr  5 19:08:33 2004
From: users@opengroupware.org (Shawn Craver)
Date: Mon, 05 Apr 2004 13:08:33 -0500
Subject: [OGo-Users] OGo Web Interface and inline HTML email with Mozilla
Message-ID: <200404051808.i35I8Xvf026025@macross7.spectreone.net>

I hadn't thought to check bugzilla. There is apparently a bug (634) in for this.

http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=634

-- Shawn Craver

> Yes, I'm having the same problem using Mozilla 1.4. Anyway, I don't know

> if this issue was already reported in bugzilla. Did you had a look to 
> http://bugzilla.opengroupware.org ?
> 
> Regards, Luca.
> 
> 
> 
> =======================================
> 
> Ianus s.r.l. Infrastrutture Informatiche
> Via G.Pesci 16, 44100 FERRARA
> Tel: +39 0532 909235
> Fax: +39 0532 907056
> Email: info@ianus.ws
> Web: http://www.ianus.ws
> 
> =======================================
> 
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
> 


From users@opengroupware.org  Mon Apr  5 20:32:16 2004
From: users@opengroupware.org (chris h)
Date: Mon, 5 Apr 2004 15:32:16 -0400
Subject: [OGo-Users] List of OGo features
In-Reply-To: <1081172461.4521.26.camel@kanwar>
References: <1081172461.4521.26.camel@kanwar>
Message-ID: <200404051532.17198.chris123@magma.ca>

On Monday 05 April 2004 09:41, M3 Freak wrote:

> I hope this helps the current and future OGo community.  If anyone
> notices problems or has comments, please reply here or contact us (info
> available on the company web site).

Nicely done. Isnt Plone a joy to work with..:) 

/ch

From users@opengroupware.org  Mon Apr  5 13:04:37 2004
From: users@opengroupware.org (=?ISO-8859-1?Q?Hauke_M=FCller?=)
Date: Mon, 5 Apr 2004 14:04:37 +0200
Subject: [OGo-Users] Date Format
In-Reply-To: <407140F6.7050801@gonsman.com>
References: <406DC60D.5080706@gonsman.com> <463FEF25-865B-11D8-8469-000393C29C2A@opengroupware.org> <4070A52F.9040303@gonsman.com> <200404050146.24073.chris123@magma.ca> <407140F6.7050801@gonsman.com>
Message-ID: <693EB60D-86F9-11D8-AB9D-000A95C60D62@epcc.de>

--Apple-Mail-9--219737243
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

Hello,

I'm having a problem setting OGO to use German date format.

Currently OGO uses something like "2004-04-07 11:00 GMT", which is the 
ISO style. I could change the datestyle in the postgresql config, but 
then OGO cannot handle the dates anymore. What's the parameter for OGO 
to use german date format (if its possible at all)?

Regards,
hauke
--Apple-Mail-9--219737243
Content-Transfer-Encoding: 7bit
Content-Type: text/enriched;
	charset=US-ASCII

<x-tad-smaller>Hello,


I'm having a problem setting OGO to use German date format.


Currently OGO uses something like "2004-04-07 11:00
GMT</x-tad-smaller><x-tad-smaller>", which is the ISO style. I could
change the datestyle in the postgresql config, but then OGO cannot
handle the dates anymore. What's the parameter for OGO to use german
date format (if its possible at all)?


Regards,

hauke</x-tad-smaller>
--Apple-Mail-9--219737243--


From users@opengroupware.org  Tue Apr  6 09:06:41 2004
From: users@opengroupware.org (Luca)
Date: Tue, 06 Apr 2004 10:06:41 +0200
Subject: [OGo-Users] Error building Skyrix-sope!!
Message-ID: <40726511.1000200@ianus.ws>

Hello,

I'm having troubles building Skyrix-sope - updated from CVS yesterday at 
21.00. Same result after refreshing sources half an hour ago.

Luca.

> In file included from WETableCell.m:23:
> WETableCell.h:26:39: warning: NGObjWeb/WODynamicElement.h: No such 
> file or directory
> In file included from WETableCell.m:23:
> WETableCell.h:31: syntax error before "WOAssociation"
> WETableCell.h:41: cannot find interface declaration for 
> `WODynamicElement', superclass of `WETableCell'
> make[3]: *** 
> [shared_debug_obj/ix86/linux-gnu/gnu-fd-nil/WETableCell.o] Error 1
> make[2]: *** [WETableView.all.subproject.variables] Error 2
> make[1]: *** [libWEExtensions.all.library.subprojects] Error 2
> make: *** [internal-all] Error 2




=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Tue Apr  6 09:52:25 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 6 Apr 2004 10:52:25 +0200
Subject: [OGo-Users] Error building Skyrix-sope!!
In-Reply-To: <40726511.1000200@ianus.ws>
References: <40726511.1000200@ianus.ws>
Message-ID: <B9C586E4-87A7-11D8-8469-000393C29C2A@opengroupware.org>

On 06.04.2004, at 10:06, Luca wrote:
> I'm having troubles building Skyrix-sope - updated from CVS yesterday 
> at 21.00. Same result after refreshing sources half an hour ago.

Yes, you are right. I've fixed it in CVS head.

Thanks for reporting,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Tue Apr  6 12:42:53 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 07:42:53 -0400
Subject: [OGo-Users] Install Documentation Contradiction
Message-ID: <407297BD.8050805@gonsman.com>

http://mail.opengroupware.org/pipermail/users/2003-July/000162.html
You need to start OGo as user 'opengroupware'

http://sukka.jct.ac.il/~yedidia/ogo_rh.html
As root start opengroupware by typing:

/etc/init.d/opengroupware start


Why do they say two different things about how to start opengroupware?

I also can't find anywhere in the documention that says to add 
opengroupware as a user.  But I have to do this because neither 
installation method will do so (perl script or manual).

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Tue Apr  6 13:28:14 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 08:28:14 -0400
Subject: [OGo-Users] Install Documentation Contradiction
In-Reply-To: <407297BD.8050805@gonsman.com>
References: <407297BD.8050805@gonsman.com>
Message-ID: <4072A25E.6010501@gonsman.com>

Correction:

> But I have to do this because neither installation method will do so 
> (perl script or manual).

It looks like installing the RPMs manually creates the users. :)

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Tue Apr  6 13:28:29 2004
From: users@opengroupware.org (Florent Manens)
Date: Tue, 06 Apr 2004 14:28:29 +0200
Subject: [OGo-Users] Install Documentation Contradiction
In-Reply-To: <407297BD.8050805@gonsman.com>
References: <407297BD.8050805@gonsman.com>
Message-ID: <4072A26D.5070505@starxpert.fr>

Sean Gonsman a écrit :
> http://mail.opengroupware.org/pipermail/users/2003-July/000162.html
> You need to start OGo as user 'opengroupware'
> http://sukka.jct.ac.il/~yedidia/ogo_rh.html
> As root start opengroupware by typing:
> /etc/init.d/opengroupware start
> Why do they say two different things about how to start opengroupware?

Yes but in /etc/init.d/opengroupware, you will find :
env -i su - opengroupware -c "$OGO_BIN $OGO_ARGS" >> $LOG 2>&1 &
(OGo IS started with opengroupware user (rpm install))

> I also can't find anywhere in the documention that says to add 
> opengroupware as a user.  But I have to do this because neither 
> installation method will do so (perl script or manual).

rpm create ogo user automagically, you may add the user with "adduser", 
change the home dir etc ...

-- 
Florent Manens
www.starxpert.fr

From users@opengroupware.org  Tue Apr  6 13:42:31 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 08:42:31 -0400
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
Message-ID: <4072A5B7.1050204@gonsman.com>

I have re-installed everything again, with hopes of better luck.  I 
think I am closer to getting this working, but I am still running into 
trouble.  It looks like everything is starting fine now, but still I can 
not access the web.  There is a warning in the log that may have 
something to do with it:

Apr 06 11:34:00 OpenGroupware [15102]: SNS disabled.
Apr 06 11:34:02 OpenGroupware [15102]: WARNING(-[NSBundle 
principalClass]): principal class <class OGoRawDatabaseModule> of bundle 
<NGBundle 0x80aa474 fullPath: 
/opt/opengroupware.org/Library/OpenGroupware.org/OGoRawDatabase.ds 
infoDictionary: 0x811143c loaded=yes> is not a class of the bundle !
Apr 06 11:34:03 OpenGroupware [15102]: |OpenGroupware| CTI Dialers:
Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| root has no 
password, you need to assign one!
Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| SKYRiX instance 
initialized ..
Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| WOHttpAdaptor 
listening on address <InetSocketAddress: *:20000>

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Tue Apr  6 13:58:29 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 6 Apr 2004 14:58:29 +0200
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <4072A5B7.1050204@gonsman.com>
References: <4072A5B7.1050204@gonsman.com>
Message-ID: <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org>

> There is a warning in the log that may have something to do with it

On Apr 6, 2004, at 2:42 PM, Sean Gonsman wrote:
> Apr 06 11:34:00 OpenGroupware [15102]: SNS disabled.

You can ignore that.

> Apr 06 11:34:02 OpenGroupware [15102]: WARNING(-[NSBundle 
> principalClass]): principal class <class OGoRawDatabaseModule> of 
> bundle <NGBundle 0x80aa474 fullPath: 
> /opt/opengroupware.org/Library/OpenGroupware.org/OGoRawDatabase.ds 
> infoDictionary: 0x811143c loaded=yes> is not a class of the bundle !

You can ignore that (but I fixed it in CVS head).

> Apr 06 11:34:03 OpenGroupware [15102]: |OpenGroupware| CTI Dialers:

You can ignore that.

> Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| root has no 
> password, you need to assign one!

Well, give "root" a password in the web interface (the login panel will 
only occur after you did that).

> Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| SKYRiX instance 
> initialized ..
> Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| WOHttpAdaptor 
> listening on address <InetSocketAddress: *:20000>

This says that the OGo instance itself is properly working.

Summary: log looks just fine. You problem is on a different position.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Tue Apr  6 14:07:48 2004
From: users@opengroupware.org (Florent Manens)
Date: Tue, 06 Apr 2004 15:07:48 +0200
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <4072A5B7.1050204@gonsman.com>
References: <4072A5B7.1050204@gonsman.com>
Message-ID: <4072ABA4.9050409@starxpert.fr>

Sean Gonsman a écrit :
> Apr 06 11:34:02 OpenGroupware [15102]: WARNING(-[NSBundle 
> principalClass]): principal class <class OGoRawDatabaseModule> of bundle 
> <NGBundle 0x80aa474 fullPath: 
> /opt/opengroupware.org/Library/OpenGroupware.org/OGoRawDatabase.ds 
> infoDictionary: 0x811143c loaded=yes> is not a class of the bundle !

i've got the same warning here, no problem.

-- 
Florent Manens
www.starxpert.fr

From users@opengroupware.org  Tue Apr  6 14:20:43 2004
From: users@opengroupware.org (Bertrand Poulet)
Date: Tue, 06 Apr 2004 15:20:43 +0200
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org>
References: <4072A5B7.1050204@gonsman.com> <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org>
Message-ID: <4072AEAB.6070201@pasteur-lille.fr>

I got the same problem ! and it doesn't work for me. the ogo dameon are 
stopped when trying to access ogo url.
is the same problem for you, Sean  ?

and where can you give password for root, if you can't access to web 
interface ?
Bertrand.
 
Helge Hess a écrit:

>> There is a warning in the log that may have something to do with it
>
>
> On Apr 6, 2004, at 2:42 PM, Sean Gonsman wrote:
>
>> Apr 06 11:34:00 OpenGroupware [15102]: SNS disabled.
>
>
> You can ignore that.
>
>> Apr 06 11:34:02 OpenGroupware [15102]: WARNING(-[NSBundle 
>> principalClass]): principal class <class OGoRawDatabaseModule> of 
>> bundle <NGBundle 0x80aa474 fullPath: 
>> /opt/opengroupware.org/Library/OpenGroupware.org/OGoRawDatabase.ds 
>> infoDictionary: 0x811143c loaded=yes> is not a class of the bundle !
>
>
> You can ignore that (but I fixed it in CVS head).
>
>> Apr 06 11:34:03 OpenGroupware [15102]: |OpenGroupware| CTI Dialers:
>
>
> You can ignore that.
>
>> Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| root has no 
>> password, you need to assign one!
>
>
> Well, give "root" a password in the web interface (the login panel 
> will only occur after you did that).
>
>> Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| SKYRiX 
>> instance initialized ..
>> Apr 06 11:34:08 OpenGroupware [15102]: |OpenGroupware| WOHttpAdaptor 
>> listening on address <InetSocketAddress: *:20000>
>
>
> This says that the OGo instance itself is properly working.
>
> Summary: log looks just fine. You problem is on a different position.
>
> regards,
>   Helge



From users@opengroupware.org  Tue Apr  6 15:46:34 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 6 Apr 2004 16:46:34 +0200
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <4072AEAB.6070201@pasteur-lille.fr>
References: <4072A5B7.1050204@gonsman.com> <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org> <4072AEAB.6070201@pasteur-lille.fr>
Message-ID: <334E4C97-87D9-11D8-90F1-000393BBAFF6@opengroupware.org>

On Apr 6, 2004, at 3:20 PM, Bertrand Poulet wrote:
> I got the same problem ! and it doesn't work for me. the ogo dameon 
> are stopped when trying to access ogo url.

Well, I can't say what your problem is - most likely the Apache 
configuration - but the posted log is just fine and doesn't show a 
single problem.

> and where can you give password for root, if you can't access to web 
> interface ?

Of course you can't which is why this isn't a problem.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Tue Apr  6 15:52:44 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 10:52:44 -0400
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <4072AEAB.6070201@pasteur-lille.fr>
References: <4072A5B7.1050204@gonsman.com> <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org> <4072AEAB.6070201@pasteur-lille.fr>
Message-ID: <4072C43C.3020202@gonsman.com>

I don't know if the dameon stops, how do you check that?  It looks like 
apache is not working at all anymore, for some mysterious reason.  I am 
now getting the following in the httpd error log file:

[Mon Jan 01 00:05:38 1996] [error] connect to application instance 
failed, tried 3 times.

I removed the add module in the httpd.conf file and restarted apache.  
Now I can access http://localhost:20000
I am very confused, but very happy that I can actually get to the admin 
panel now :)

I still have to figure out how to get this module to work.

-Sean

> I got the same problem ! and it doesn't work for me. the ogo dameon 
> are stopped when trying to access ogo url.
> is the same problem for you, Sean  ?
>
> and where can you give password for root, if you can't access to web 
> interface ?
> Bertrand.


-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Tue Apr  6 14:14:15 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 09:14:15 -0400
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org>
References: <4072A5B7.1050204@gonsman.com> <19FC3D68-87CA-11D8-90F1-000393BBAFF6@opengroupware.org>
Message-ID: <4072AD27.9080502@abovemedia.com>

> Well, give "root" a password in the web interface (the login panel 
> will only occur after you did that).

How do I give "root" a pasword in the web interface.  I thought I can't 
reach the web interface.

-Sean

-- 
Sean Gonsman
Above Media
http://www.abovemedia.com
sean@abovemedia.com



From users@opengroupware.org  Tue Apr  6 17:16:30 2004
From: users@opengroupware.org (Michael Jirsch)
Date: Tue, 06 Apr 2004 18:16:30 +0200
Subject: [OGo-Users] Performance
Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>

This is a multi-part message in MIME format.

--Boundary_(ID_zPBC2qdxNXgVFCMhlnTmLA)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Hello,
 
I have got a terribly bad performance-problem with OpenGroupware. 
There are about 30 persons using our OpenGroupware-installation via web.
I think this is not very much for a groupware solution. Anyhow we get
response-delays of several seconds, even up to minutes when all users
try to interact simultaniously with the system. 
 
Has anyone experience with OGo and a lot of users? How many users is
considered the maximum? 
 
 
Here some information about our system:
Intel P4 1,7 GH (256kB Cache)
2 GB RAM
We are using the iPlanet IMAP server, which is running on a different
machine. Is it possible that the transactions with the mail-server are
resposible for bad performance?
 
 
I would be thankfull for any hints, how to speed up our
OpenGroupware-installation
 
    Michael Jirsch

--Boundary_(ID_zPBC2qdxNXgVFCMhlnTmLA)
Content-type: text/html; charset=US-ASCII
Content-transfer-encoding: 7BIT

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<TITLE>Nachricht</TITLE>

<META content="MSHTML 6.00.3790.94" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2>Hello,</FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>I have got a 
terribly bad performance-problem with OpenGroupware. </FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>There are about 30 
persons using our OpenGroupware-installation via web. I think this is not very 
much for a groupware solution.&nbsp;Anyhow we get response-delays of several 
seconds, even up to minutes when all users try to interact simultaniously with 
the system. </FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>Has anyone 
experience with OGo and&nbsp;a lot of&nbsp;users? How many users is considered 
the maximum? </FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>Here some 
information about our system:</FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>Intel P4 1,7 GH 
(256kB Cache)</FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>2 GB 
RAM</FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>We are using the 
iPlanet IMAP server, which is running on a different machine. Is it possible 
that the transactions with the mail-server&nbsp;are resposible for bad 
performance?</FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial size=2>I would be thankfull 
for any hints, how to speed up our 
OpenGroupware-installation</FONT></SPAN></DIV>
<DIV><SPAN class=575133615-06042004><FONT face=Arial 
size=2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=575133615-06042004>&nbsp;&nbsp;&nbsp; <FONT face=Arial 
size=2>Michael Jirsch</FONT></SPAN></DIV></BODY></HTML>

--Boundary_(ID_zPBC2qdxNXgVFCMhlnTmLA)--

From users@opengroupware.org  Tue Apr  6 17:22:44 2004
From: users@opengroupware.org (chris h)
Date: Tue, 6 Apr 2004 12:22:44 -0400
Subject: [OGo-Users] Performance
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
References: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
Message-ID: <200404061222.44563.chris123@magma.ca>

On April 6, 2004 12:16 pm, Michael Jirsch wrote:

> We are using the iPlanet IMAP server, which is running on a different
> machine. Is it possible that the transactions with the mail-server are
> resposible for bad performance?

Off the top of my head only, most likely. The recommended setup however 
CyrusIMAP. Im sure others will provide more detailed feedback.

regards

/ch

From users@opengroupware.org  Tue Apr  6 17:30:59 2004
From: users@opengroupware.org (M3 Freak)
Date: Tue, 06 Apr 2004 12:30:59 -0400
Subject: [OGo-Users] Performance
In-Reply-To: <20040406161626.KVGJ156344.fep01-mail.bloor.is.net.cable.rogers.com@mail.opengroupware.org>
References: <20040406161626.KVGJ156344.fep01-mail.bloor.is.net.cable.rogers.com@mail.opengroupware.org>
Message-ID: <1081269059.4491.1.camel@kanwar>

On Tue, 2004-04-06 at 12:16, Michael Jirsch wrote:
> Here some information about our system:
> Intel P4 1,7 GH (256kB Cache)
> 2 GB RAM
> We are using the iPlanet IMAP server, which is running on a different
> machine. Is it possible that the transactions with the mail-server are
> resposible for bad performance?

What part of OGo is slow?  That is, is OGo slow overall, or are you
referring to OGo's web email client?

Kanwar
Systems Aligned Inc.
www.systemsaligned.com


From users@opengroupware.org  Tue Apr  6 17:26:58 2004
From: users@opengroupware.org (Luca)
Date: Tue, 06 Apr 2004 18:26:58 +0200
Subject: [OGo-Users] Performance
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
References: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
Message-ID: <4072DA52.9010009@ianus.ws>

Michael Jirsch wrote:

> I have got a terribly bad performance-problem with OpenGroupware.
> There are about 30 persons using our OpenGroupware-installation via 
> web. I think this is not very much for a groupware solution. Anyhow we 
> get response-delays of several seconds, even up to minutes when all 
> users try to interact simultaniously with the system.

Just in these days someone pointed out that hardware specs are quite 
useless for determining OGo speed in definitive way.

> Here some information about our system:
> Intel P4 1,7 GH (256kB Cache)
> 2 GB RAM
> We are using the iPlanet IMAP server, which is running on a different 
> machine. Is it possible that the transactions with the mail-server are 
> resposible for bad performance?

It looks like a bandwidth issue. Transactions with mail server may also 
be responsible for that delay. And more, is your installation recent? A 
few time ago was fixed an issue that was really important to speed-up 
big IMAP folders listing.

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Tue Apr  6 17:33:09 2004
From: users@opengroupware.org (M3 Freak)
Date: Tue, 06 Apr 2004 12:33:09 -0400
Subject: [OGo-Users] List of OGo features
In-Reply-To: <200404051532.17198.chris123@magma.ca>
References: <1081172461.4521.26.camel@kanwar>
 <200404051532.17198.chris123@magma.ca>
Message-ID: <1081269189.4491.5.camel@kanwar>

On Mon, 2004-04-05 at 15:32, chris h wrote:
> On Monday 05 April 2004 09:41, M3 Freak wrote:
> 
> > I hope this helps the current and future OGo community.  If anyone
> > notices problems or has comments, please reply here or contact us (info
> > available on the company web site).
> 
> Nicely done. Isnt Plone a joy to work with..:) 

Ya, Plone is great.  It's helped us out a lot.  We badly needed an easy
to use content management system for our website, and Plone is perfect.

Next step is to completely customize it, but we'll deal with that later.

Anyway, thanks for letting me know about the OGo features list.  I think
it was needed.  I'll be adding it to the OGo doc site as well.

Kanwar
Systems Aligned Inc.
www.systemsaligned.com


From users@opengroupware.org  Tue Apr  6 17:37:02 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 6 Apr 2004 18:37:02 +0200
Subject: [OGo-Users] Performance
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
References: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
Message-ID: <A20AA56A-87E8-11D8-8469-000393C29C2A@opengroupware.org>

On 06.04.2004, at 18:16, Michael Jirsch wrote:
> There are about 30 persons using our OpenGroupware-installation via=20
> web. I think this is not very much for a groupware solution.

No, this is not much.

> Anyhow we get response-delays of several seconds, even up to minutes=20=

> when all users try to interact simultaniously with the system.

Use the profiling text to find out where your bottleneck is located:
   http://docs.opengroupware.org/Members/helge/Profiling/

> Has anyone experience with OGo and=A0a lot of=A0users? How many users =
is=20
> considered the maximum?

This was recently discussed in the list:
   http://docs.opengroupware.org/Members/helge/numberofusers

> Here some information about our system:
> Intel P4 1,7 GH (256kB Cache)
> 2 GB RAM

Should be more than enough.

> We are using the iPlanet IMAP server, which is running on a different=20=

> machine. Is it possible that the transactions with the mail-server=A0are=
=20
> resposible for bad performance?

Yes, this can certainly be part of the problem, see the profiling=20
document.

regards,
   Helge
--=20
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Tue Apr  6 20:23:20 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Tue, 6 Apr 2004 21:23:20 +0200 (CEST)
Subject: [OGo-Users] why to setup default language
Message-ID: <20040406192320.86538.qmail@web25103.mail.ukl.yahoo.com>

--0-849303157-1081279400=:86371
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

i do my best and i start openldap without any problem but when i connect to http://servername:20000/OpenGroupware at default connection the language is in german i need help to do this in english or french
 
sam

		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-849303157-1081279400=:86371
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>i do my best and i start openldap without any problem but when i connect to <A href="http://servername:20000/OpenGroupware">http://servername:20000/OpenGroupware</A> at default connection the language is in german i need help to do this in english or french</DIV>
<DIV>&nbsp;</DIV>
<DIV>sam</DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-849303157-1081279400=:86371--

From users@opengroupware.org  Tue Apr  6 21:04:51 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Tue, 6 Apr 2004 16:04:51 -0400
Subject: [OGo-Users] List of OGo features
In-Reply-To: <1081269189.4491.5.camel@kanwar>
References: <1081172461.4521.26.camel@kanwar> <200404051532.17198.chris123@magma.ca> <1081269189.4491.5.camel@kanwar>
Message-ID: <200404061604.53245.chris123@magma.ca>

On April 6, 2004 12:33 pm, M3 Freak wrote:

> Anyway, thanks for letting me know about the OGo features list.  I think
> it was needed.  I'll be adding it to the OGo doc site as well.


PLs do however pls be aware that the photo product that you are using is 
currently not available in the ogo-docs current rev. I have requested 
permission to update the site and once thats in place, the appropriate app 
will be included. At this time images need to be linked manaly within the 
text of a document. 

So as to not burden other, lets take this discussion, in the future (ie; 
support etc) to the documentation list pls.

Regards

/ch

From users@opengroupware.org  Tue Apr  6 20:37:09 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 15:37:09 -0400
Subject: [OGo-Users] The SKYRIX application server could not connect to the database server
 !
Message-ID: <407306E5.1000809@gonsman.com>

Everything seemed to be working fine at http://localhost:20000/OPenGroupware

I wanted opengroupware to start automatically so I did the following and 
then restarted:

chkconfig --add opengroupware

Now I get this error when accesssing the web interface:

The SKYRIX application server could not connect to the database server !

Please ensure that your database server is running and that the 
LSConnectionDictionary default is correctly set.

------------------------------------------------------------------------
Current database configuration:
database: 	ogo
server: 	localhost
user: 	ogo


-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Tue Apr  6 20:39:59 2004
From: users@opengroupware.org (chris h)
Date: Tue, 6 Apr 2004 15:39:59 -0400
Subject: [OGo-Users] The SKYRIX application server could not connect to the database server !
In-Reply-To: <407306E5.1000809@gonsman.com>
References: <407306E5.1000809@gonsman.com>
Message-ID: <200404061539.59125.chris123@magma.ca>

On April 6, 2004 03:37 pm, Sean Gonsman wrote:
> Everything seemed to be working fine at
> http://localhost:20000/OPenGroupware
>
> I wanted opengroupware to start automatically so I did the following and
> then restarted:
>
> chkconfig --add opengroupware
>
> Now I get this error when accesssing the web interface:
>
> The SKYRIX application server could not connect to the database server !
>
> Please ensure that your database server is running and that the
> LSConnectionDictionary default is correctly set.

Did you set the postgresql database to auto start at boot? If not you will 
need to do it manually. Try that first and then connect to OGo for now.

/ch

From users@opengroupware.org  Tue Apr  6 21:42:49 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 06 Apr 2004 16:42:49 -0400
Subject: [OGo-Users] The SKYRIX application server could not connect to
 the database server !
In-Reply-To: <200404061539.59125.chris123@magma.ca>
References: <407306E5.1000809@gonsman.com> <200404061539.59125.chris123@magma.ca>
Message-ID: <40731649.7070909@gonsman.com>

Is it just me or is this program very sensitive :)

Yes, posgtresql starts on boot as well as apache.  I fooled around for a 
while trying to get it to work.  I had opengroupware shutdown for about 
20 minutes and then started it and it just started working.  I am glad 
that it is working again, but I didn't really do anything to get it 
working.  Is it possible that it was trying to reach a page when I was 
still logged in?

-Sean

chris h wrote:

>On April 6, 2004 03:37 pm, Sean Gonsman wrote:
>  
>
>>Everything seemed to be working fine at
>>http://localhost:20000/OPenGroupware
>>
>>I wanted opengroupware to start automatically so I did the following and
>>then restarted:
>>
>>chkconfig --add opengroupware
>>
>>Now I get this error when accesssing the web interface:
>>
>>The SKYRIX application server could not connect to the database server !
>>
>>Please ensure that your database server is running and that the
>>LSConnectionDictionary default is correctly set.
>>    
>>
>
>Did you set the postgresql database to auto start at boot? If not you will 
>need to do it manually. Try that first and then connect to OGo for now.
>
>/ch
>  
>

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Tue Apr  6 22:13:22 2004
From: users@opengroupware.org (Florent Manens)
Date: Tue, 6 Apr 2004 23:13:22 +0200
Subject: [OGo-Users] why to setup default language
In-Reply-To: <20040406192320.86538.qmail@web25103.mail.ukl.yahoo.com>
References: <20040406192320.86538.qmail@web25103.mail.ukl.yahoo.com>
Message-ID: <20040406211322.GC32230@suzan.grossac.dyndns.org>

--aVD9QWMuhilNxW9f
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Tue, Apr 06, 2004 at 09:23:20PM +0200, SODATONOU Dodji Samuel wrote:
>    i  do  my  best  and  i  start openldap without any problem but when i
>    connect   to   [1]http://servername:20000/OpenGroupware   at   default
>    connection the language is in german i need help to do this in english
>    or french

You can change the default lang by changing property's of the user
template called "template"

You will find it when you are connected as root user in "User
management"

You can create a new template too.

--=20
Florent Manens
www.starxpert.fr

--aVD9QWMuhilNxW9f
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQFAcx1yWvYDjJUBLbcRAhQvAKDVlrGfLGnnpswl4gpP+qw2oaq97ACeP9zt
Yl4yFdNyJod0GAJ+3AWJ1j0=
=c/8x
-----END PGP SIGNATURE-----

--aVD9QWMuhilNxW9f--

From users@opengroupware.org  Tue Apr  6 22:20:26 2004
From: users@opengroupware.org (Florent Manens)
Date: Tue, 6 Apr 2004 23:20:26 +0200
Subject: [OGo-Users] The SKYRIX application server could not connect to the database server !
In-Reply-To: <40731649.7070909@gonsman.com>
References: <407306E5.1000809@gonsman.com> <200404061539.59125.chris123@magma.ca> <40731649.7070909@gonsman.com>
Message-ID: <20040406212026.GD32230@suzan.grossac.dyndns.org>

--yVhtmJPUSI46BTXb
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Tue, Apr 06, 2004 at 04:42:49PM -0400, Sean Gonsman wrote:
> Yes, posgtresql starts on boot as well as apache.  I fooled around for a=
=20
> while trying to get it to work.  I had opengroupware shutdown for about=
=20
> 20 minutes and then started it and it just started working.=20

Yes but i think that postgrel is started after OGo, isn't it ?

If OGo is started without postgres, OGo is locked as "sorry, no
database, i can't start", you must restart OGo (after postgres) it will
work like a charm.

--=20
Florent Manens=20
www.starxpert.fr

--yVhtmJPUSI46BTXb
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQFAcx8aWvYDjJUBLbcRAj8JAKCzEyVALC5WJYKjXyPA1Z3/adGckQCgkDz3
/KxmMpsxK+GVaV3z1IsxbEA=
=wRP3
-----END PGP SIGNATURE-----

--yVhtmJPUSI46BTXb--

From users@opengroupware.org  Wed Apr  7 07:10:59 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Wed, 7 Apr 2004 02:10:59 -0400
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <4072C43C.3020202@gonsman.com>
References: <4072A5B7.1050204@gonsman.com> <4072AEAB.6070201@pasteur-lille.fr> <4072C43C.3020202@gonsman.com>
Message-ID: <200404070211.00144.chris123@magma.ca>

On April 6, 2004 10:52 am, Sean Gonsman wrote:
> I don't know if the dameon stops, how do you check that?  It looks like
> apache is not working at all anymore, for some mysterious reason.  I am
> now getting the following in the httpd error log file:
>
> [Mon Jan 01 00:05:38 1996] [error] connect to application instance
> failed, tried 3 times.
>
> I removed the add module in the httpd.conf file and restarted apache.
> Now I can access http://localhost:20000
> I am very confused, but very happy that I can actually get to the admin
> panel now :)

Things to check:

1. Is the syntax correct in your http.conf file?
	ie: module path
	ie: module name

2. Check that all is correct with apache, then reload the module, then the 
sequence I use to bring up the system is as follows:
	- start apache
	- start postgresql
	- start ogo

3. hit the recommended URL http://localhost/OpenGroupware and if it fails 
check the apache log file again.

/ch


From users@opengroupware.org  Wed Apr  7 07:01:16 2004
From: users@opengroupware.org (Michael Jirsch)
Date: Wed, 07 Apr 2004 08:01:16 +0200
Subject: AW: [OGo-Users] Performance
In-Reply-To: <1081269059.4491.1.camel@kanwar>
Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHS9veOxRECOfb1L+k+/+QEAAAAA@first-private.de>

Thanks a lot for the answers, to the question below:

> What part of OGo is slow?  That is, is OGo slow overall, or are you
referring to OGo's web email client?

It is the overall OGo performance. Seems that some queries are blocking
the entire system


From users@opengroupware.org  Wed Apr  7 13:02:55 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Wed, 07 Apr 2004 08:02:55 -0400
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <200404070211.00144.chris123@magma.ca>
References: <4072A5B7.1050204@gonsman.com> <4072AEAB.6070201@pasteur-lille.fr> <4072C43C.3020202@gonsman.com> <200404070211.00144.chris123@magma.ca>
Message-ID: <4073EDEF.9030100@gonsman.com>

>Things to check:
>
>1. Is the syntax correct in your http.conf file?
>	ie: module path
>	ie: module name
>
How does this look?

#######################################
# mod_ngobjweb Apache 2 Configuration
#######################################

LoadModule ngobjweb_module 
/opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so
#OpenGroupware WebUI

SetHandler ngobjweb-adaptor
SetAppPort 20000


Alias /OpenGroupware.woa/WebServerResources/ 
/opt/opengroupware.org/WebServerResources/

#ZideStore

SetHandler ngobjweb-adaptor
SetAppPort 23000

Alias /zidestore/so/images 
/opt/opengroupware.org/WOApps/ZideStore.woa/WebServerResources

>2. Check that all is correct with apache, then reload the module, then the 
>sequence I use to bring up the system is as follows:
>	- start apache
>	- start postgresql
>	- start ogo
>
>3. hit the recommended URL http://localhost/OpenGroupware and if it fails 
>check the apache log file again.
>
I did all of this and the error is still the same.  When I created the 
ngobjweb_2.0.40.so there were no errors so I expect that everything is 
fine with the file.  Maybe there is some other program that I need on my 
Linux box that I don't have?

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Wed Apr  7 14:09:27 2004
From: users@opengroupware.org (Bertrand Poulet)
Date: Wed, 07 Apr 2004 15:09:27 +0200
Subject: [OGo-Users] OGoRawDatabase.ds is not a class of the bundle !
In-Reply-To: <4073EDEF.9030100@gonsman.com>
References: <4072A5B7.1050204@gonsman.com> <4072AEAB.6070201@pasteur-lille.fr> <4072C43C.3020202@gonsman.com> <200404070211.00144.chris123@magma.ca> <4073EDEF.9030100@gonsman.com>
Message-ID: <4073FD87.1090509@pasteur-lille.fr>

sean wrote :
 > I don't know if the dameon stops, how do you check that? 
 > It looks like apache is not working at all anymore, for some 
mysterious reason.
 > I am now  getting the following in the httpd error log file:

to check if daemon is running, you can do :
# ps -ef | grep opengroupware
opengro   9297     1  0 14:23 pts/0    00:00:00 -bash -c cd 
/opt/opengroupware.org/WOApps && ./OpenGroupware.woa/ix86/l&
opengro   9299  9297 14 14:23 pts/0    00:00:04 
./OpenGroupware.woa/ix86/linux-gnu/gnu-fd-nil/OpenGroupware -WOPort 200)
opengro   9363     1  0 14:23 pts/0    00:00:00 -bash -c cd 
/opt/opengroupware.org/WOApps && ./ZideStore.woa/ix86/linux&
opengro   9364  9363  3 14:23 pts/0    00:00:01 
./ZideStore.woa/ix86/linux-gnu/gnu-fd-nil/ZideStore



>> Things to check:
>>
>> 1. Is the syntax correct in your http.conf file?
>>     ie: module path
>>     ie: module name
>>
the host is running apache2 and there is in httpd2.conf :
LoadModule ngobjweb_module      
/opt/opengroupware.org/Apache/ngobjweb_2.0.47.so

with :
# ll /opt/opengroupware.org/Apache/ngobjweb_2.0.47.so
-rwxr-xr-x    1 opengroupware skyrix      29519 mar 22 17:57 
/opt/opengroupware.org/Apache/ngobjweb_2.0.47.so

in commonhttpd.conf :

Alias /OpenGroupware.woa/WebServerResources/ 
/opt/opengroupware.org/WebServerResources/
<LocationMatch '^/OpenGroupware/*'>
       SetHandler ngobjweb-adaptor
       SetAppPort 20000
</LocationMatch>
<LocationMatch '^/zidestore/*'>
      SetHandler ngobjweb-adaptor
      SetAppPort 30000
</LocationMatch>


netstat give the result :
tcp        0      0 0.0.0.0:20000           0.0.0.0:*               
LISTEN      9805/OpenGroupware
tcp        0      0 0.0.0.0:30000           0.0.0.0:*               
LISTEN      9870/ZideStore
tcp        0      0 0.0.0.0:80              0.0.0.0:*               
LISTEN      9004/httpd2
so it seems to be OK.


the apache server is owned by the user "apache".
the ogo servers are owned by opengroupware, who is also.owner of 
opengroupware directory.
could it be the problem ?

Bertrand.


> How does this look?
>
> #######################################
> # mod_ngobjweb Apache 2 Configuration
> #######################################
>
> LoadModule ngobjweb_module 
> /opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so
> #OpenGroupware WebUI
>
> SetHandler ngobjweb-adaptor
> SetAppPort 20000
>
>
> Alias /OpenGroupware.woa/WebServerResources/ 
> /opt/opengroupware.org/WebServerResources/
>
> #ZideStore
>
> SetHandler ngobjweb-adaptor
> SetAppPort 23000
>
> Alias /zidestore/so/images 
> /opt/opengroupware.org/WOApps/ZideStore.woa/WebServerResources
>
>


From users@opengroupware.org  Wed Apr  7 15:05:59 2004
From: users@opengroupware.org (Chris Gamache)
Date: Wed, 7 Apr 2004 07:05:59 -0700 (PDT)
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <4073FD87.1090509@pasteur-lille.fr>
Message-ID: <20040407140559.94481.qmail@web13801.mail.yahoo.com>

Skyrix crew: Thanks for this update. I can truly say that this is a step in the
right direction!

Some questions for you:

There are several calendar folders, the Calendar on the top of the tree,
Overview, and one under the "public" folder ... I still can't reliably drill
down into the groups (is this still the same bug?). There's a [+], but when I
click it, it disappears. I imagine that if I could get there, there would be a
Calendar there too. What criteria is used to determine which calendar an event
goes into?

I guess we could classify them by
  1. Calendar
  2. Overview
  3. A Group Calendar
  4. Public Calendar

-=-

If I create a Calendar event in Opengroupware, it appears as "non-busy" time in
ZideLook, therefore the day in which the event occurs on the
calendar-at-a-glance is not in a bold font. I can't seem to find a spot in
OpenGroupware to set time as "Busy" ... I'm using the Slackware packages built
on 4/6/04 for my OGo installation.

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway 
http://promotions.yahoo.com/design_giveaway/

From users@opengroupware.org  Wed Apr  7 15:21:20 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 10:21:20 -0400
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <20040407140559.94481.qmail@web13801.mail.yahoo.com>
References: <20040407140559.94481.qmail@web13801.mail.yahoo.com>
Message-ID: <200404071021.20313.chris123@magma.ca>

On April 7, 2004 10:05 am, Chris Gamache wrote:
> Skyrix crew: Thanks for this update. I can truly say that this is a step in
> the right direction!
>
> Some questions for you:

A favor and a request if I may,

A few days back we were discussing integration of contact data form 
OGo>zidelook>outlook addressbook>OOo We postulated at that time that the 
transition of contacts from OGo to OOo should be seemless. While we can check 
and confirm the above the missing piece was integration of contacts between 
OGo and Outlook as a pluggin was not available. If time permits could you do 
a simple test and post the results to the list pls. It would be most 
appreciated. 

Simple test: Can you import OGo contacts via zidestore into Outlook and the 
reverse.?

Regards and mtia..:)

/ch
 

From users@opengroupware.org  Wed Apr  7 15:46:05 2004
From: users@opengroupware.org (Chris Gamache)
Date: Wed, 7 Apr 2004 07:46:05 -0700 (PDT)
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <200404071021.20313.chris123@magma.ca>
Message-ID: <20040407144605.50734.qmail@web13811.mail.yahoo.com>

--- chris h <chris123@magma.ca> wrote:
> On April 7, 2004 10:05 am, Chris Gamache wrote:
> > Skyrix crew: Thanks for this update. I can truly say that this is a step in
> > the right direction!
> >
> > Some questions for you:
> 
> A favor and a request if I may,
> 
> A few days back we were discussing integration of contact data form 
> OGo>zidelook>outlook addressbook>OOo We postulated at that time that the 
> transition of contacts from OGo to OOo should be seemless. While we can check
> 
> and confirm the above the missing piece was integration of contacts between 
> OGo and Outlook as a pluggin was not available. If time permits could you do 
> a simple test and post the results to the list pls. It would be most 
> appreciated. 
> 
> Simple test: Can you import OGo contacts via zidestore into Outlook and the 
> reverse.?
> 

I created a contact in the OGo Contacts Folder. I dragged it to the Contacts in
my Personal Folders, the contact was copied. I created another contact in my
Personal Folders, I dragged it to the OGo Contacts Folder, and it was moved
(not copied). Is this what you were trying to illustrate? The limited data that
I entered seemed to be replicated properly. I entered Name, Phone #, and Email
address.

HTH,

CG

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway 
http://promotions.yahoo.com/design_giveaway/

From users@opengroupware.org  Wed Apr  7 15:54:59 2004
From: users@opengroupware.org (M3 Freak)
Date: Wed, 07 Apr 2004 10:54:59 -0400
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <200404071021.20313.chris123@magma.ca>
References: <20040407140559.94481.qmail@web13801.mail.yahoo.com>
 <200404071021.20313.chris123@magma.ca>
Message-ID: <1081349698.4525.9.camel@kanwar>

On Wed, 2004-04-07 at 10:21, chris h wrote:
> On April 7, 2004 10:05 am, Chris Gamache wrote:
> > Skyrix crew: Thanks for this update. I can truly say that this is a step in
> > the right direction!
> >
> > Some questions for you:
> 
> A favor and a request if I may,
> 
> A few days back we were discussing integration of contact data form 
> OGo>zidelook>outlook addressbook>OOo We postulated at that time that the 
> transition of contacts from OGo to OOo should be seemless. While we can check 
> and confirm the above the missing piece was integration of contacts between 
> OGo and Outlook as a pluggin was not available. If time permits could you do 
> a simple test and post the results to the list pls. It would be most 
> appreciated. 
> 
> Simple test: Can you import OGo contacts via zidestore into Outlook and the 
> reverse.?

Outlook -> OGo is definitely possible because we did that for one of our
clients in December.  It works very well and is reliable.

OGo -> Outlook was working as well, but I believe there was a small
problem (I think some of the info was missing...on the other hand, I may
be confusing the December migration with the October testing).  I would
have to check to make sure.  I'll report my results here, unless someone
else beats me to it.

Regards,

Kanwar
Systems Aligned Inc.
www.systemsaligned.com


From users@opengroupware.org  Wed Apr  7 16:05:28 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 11:05:28 -0400
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <1081349698.4525.9.camel@kanwar>
References: <20040407140559.94481.qmail@web13801.mail.yahoo.com> <200404071021.20313.chris123@magma.ca> <1081349698.4525.9.camel@kanwar>
Message-ID: <200404071105.28872.chris123@magma.ca>

On April 7, 2004 10:54 am, M3 Freak wrote:

Thanks for the responses. What we are trying to document is the following. 

1. A contact existing in OGo. (done)

2. Adding that contact to Outlook Addressbook via Zidelook (incomplete)

3. Adding the Outlook addressbook as a data source to OpenOffice..:) (done)

There is no race lads...but many thanks for your responses..

Best

/ch

From users@opengroupware.org  Wed Apr  7 20:04:26 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 15:04:26 -0400
Subject: [OGo-Users] Webdav & file attributes
Message-ID: <200404071504.27025.chris123@magma.ca>

Greets:

Dont think this is a bug, rather an observation.

1. uploaded a series of files into a db based project to ensure that it was 
webdave enabled.
2. file format is sxw. (5 in total in this example)
3. to speed things up, I did not enter "filename" nor "title" 
4. now when I try to access this repository with OOo's webdav enabled client I 
browse the tree but the files located in a subfolder (in this case called 
test) are not visible.
5. checking OGo under contents gives me the correct settings:
Download: Calendar.sxw  
MIME Type: application/vnd.sun.xml.writer 
Size: 71523 
6. checking OGo under attributes, this remains empty of course
7. OGo rpms are from last friday.

So in the end, I cannot "see" the contents of this folder via OOo's webdav yet 
cadaver reports all files as present:

tree structure is as follows:

- project 0001
	|-folder one
		|- file one
		| -file two
		|- etc
	|-file A
	|-file B
	|-etc

Only files in folder one are no longer visable. Clues or ideas anyone?

regards

/ch

From users@opengroupware.org  Wed Apr  7 20:09:17 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 15:09:17 -0400
Subject: [OGo-Users] Webdav & file attributes
In-Reply-To: <200404071504.27025.chris123@magma.ca>
References: <200404071504.27025.chris123@magma.ca>
Message-ID: <200404071509.17890.chris123@magma.ca>

On April 7, 2004 03:04 pm, chris h wrote:

> So in the end, I cannot "see" the contents of this folder via OOo's webdav
> yet cadaver reports all files as present:

Ok this is really weird; cadaver now reports;

Listing collection 
`/zidestore/so/chris123/Projects/OOoTest/Documents/ogo_manual/split_chapters/': 
failed:
404 Not Found

hmm...this is getting interesting..:)

/ch

From users@opengroupware.org  Wed Apr  7 20:23:14 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 15:23:14 -0400
Subject: [OGo-Users] Webdav & file attributes
In-Reply-To: <200404071509.17890.chris123@magma.ca>
References: <200404071504.27025.chris123@magma.ca> <200404071509.17890.chris123@magma.ca>
Message-ID: <200404071523.14512.chris123@magma.ca>

On April 7, 2004 03:09 pm, chris h wrote:

> Listing collection
> `/zidestore/so/chris123/Projects/OOoTest/Documents/ogo_manual/split_chapter
>s/': failed:
> 404 Not Found

OK I am now officially perplexed. 

All subfolders created in this project (permissions are fine) are now not 
showing up via webdav ie: cadaver. I just created two more subfolders in the 
main projects, uploaded files into each folder to test and they are not 
visible via webdav, visible via the webUI of course and cadaver is reporting 
404..on all these folders..strange..and yes zidestore has been rebooted and 
is running just fine (for months now) 

/ch


From users@opengroupware.org  Wed Apr  7 20:34:03 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 7 Apr 2004 21:34:03 +0200
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <200404071105.28872.chris123@magma.ca>
References: <20040407140559.94481.qmail@web13801.mail.yahoo.com> <200404071021.20313.chris123@magma.ca> <1081349698.4525.9.camel@kanwar> <200404071105.28872.chris123@magma.ca>
Message-ID: <869F8BC3-88CA-11D8-AFC5-00039340AF4A@opengroupware.org>

On 07.04.2004, at 17:05, chris h wrote:
> Thanks for the responses. What we are trying to document is the 
> following.
> 1. A contact existing in OGo. (done)
> 2. Adding that contact to Outlook Addressbook via Zidelook (incomplete)
> 3. Adding the Outlook addressbook as a data source to OpenOffice..:) 
> (done)

Not sure, but maybe there is a misunderstanding. To add an OGo contact 
to the Outlook addressbook, you don't need to drag/copy anything.

In Outlook you can make any contact folder an "addressbook" (that is, 
there is an MAPI addressbook provider which just wraps the Outlook 
contact folder [which in turn is driven by a MAPI storage provider - 
like ZideLook).

To do this, check the properties of the contact folder (right mouse 
something), there is a tab where you can select a checkbox to export 
the folder as an AB and give it an AB name.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Wed Apr  7 20:38:21 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 7 Apr 2004 21:38:21 +0200
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <20040407140559.94481.qmail@web13801.mail.yahoo.com>
References: <20040407140559.94481.qmail@web13801.mail.yahoo.com>
Message-ID: <20B9D87C-88CB-11D8-AFC5-00039340AF4A@opengroupware.org>

On 07.04.2004, at 16:05, Chris Gamache wrote:
> I still can't reliably drill down into the groups (is this still the 
> same bug?).

Yes :-| Happens if you configure the IMAP4 provider in combination with 
ZL (just ZL works fine).

> There's a [+], but when I click it, it disappears.

Yes, thats the effect.

> I imagine that if I could get there, there would be a
> Calendar there too. What criteria is used to determine which calendar 
> an event
> goes into?

This should help:
   http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs

> If I create a Calendar event in Opengroupware, it appears as 
> "non-busy" time in ZideLook, therefore the day in which the event 
> occurs on the
> calendar-at-a-glance is not in a bold font. I can't seem to find a 
> spot in
> OpenGroupware to set time as "Busy" ... I'm using the Slackware 
> packages built
> on 4/6/04 for my OGo installation.

I don't think I understand this. Currently all OGo events are reported 
as busy events in the freebusy URL query.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Wed Apr  7 20:46:01 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 15:46:01 -0400
Subject: [OGo-Users] Webdav & file attributes
In-Reply-To: <200404071509.17890.chris123@magma.ca>
References: <200404071504.27025.chris123@magma.ca> <200404071509.17890.chris123@magma.ca>
Message-ID: <200404071546.01275.chris123@magma.ca>

On April 7, 2004 03:09 pm, chris h wrote:

Ok...this is weird. Any folder and or folder contents created in that 
particular project are no longer webdav accessible. I have no idea what is 
wrong with that particular projects structure or permissions. 

Now creating a new project (different name) and recreating the same file 
structure and adding content with out title or any other attributes assigned 
allows full access by webdav, OOo or cadaver. Strange.

Anyone else experienced this. I don't think this is a bug...rather a barf..:)

/ch



From users@opengroupware.org  Wed Apr  7 23:52:55 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Wed, 07 Apr 2004 18:52:55 -0400
Subject: [OGo-Users] The SKYRIX application server could not connect to
 the database server !
In-Reply-To: <20040406212026.GD32230@suzan.grossac.dyndns.org>
References: <407306E5.1000809@gonsman.com> <200404061539.59125.chris123@magma.ca> <40731649.7070909@gonsman.com> <20040406212026.GD32230@suzan.grossac.dyndns.org>
Message-ID: <40748647.9090306@gonsman.com>

Thank you for the help.  I noticed that Opengroupware was starting 
before httpd and postgresql during bootup.  So I learned that you can 
change the startup order.  In the init file opengroupware, I changed the 
line:

# chkconfig: 2345 75 25

to:

# chkconfig: 235 99 15

This makes it load last so that everything it needs is available (I used 
the same as Webmin because it was loading last).  Then I added it to the 
init using:

chkconfig --add opengroupware

Now everything starts up fine. Thanks to all for helping me get this 
working.  I am still eager to get it working through apache though :)

-Sean

Florent Manens wrote:

>On Tue, Apr 06, 2004 at 04:42:49PM -0400, Sean Gonsman wrote:
>  
>
>>Yes, posgtresql starts on boot as well as apache.  I fooled around for a 
>>while trying to get it to work.  I had opengroupware shutdown for about 
>>20 minutes and then started it and it just started working. 
>>    
>>
>
>Yes but i think that postgrel is started after OGo, isn't it ?
>
>If OGo is started without postgres, OGo is locked as "sorry, no
>database, i can't start", you must restart OGo (after postgres) it will
>work like a charm.
>
>  
>

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Thu Apr  8 02:26:09 2004
From: users@opengroupware.org (chris h)
Date: Wed, 7 Apr 2004 21:26:09 -0400
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <869F8BC3-88CA-11D8-AFC5-00039340AF4A@opengroupware.org>
References: <20040407140559.94481.qmail@web13801.mail.yahoo.com> <200404071105.28872.chris123@magma.ca> <869F8BC3-88CA-11D8-AFC5-00039340AF4A@opengroupware.org>
Message-ID: <200404072126.09652.chris123@magma.ca>

On April 7, 2004 03:34 pm, Helge Hess wrote:

> To do this, check the properties of the contact folder (right mouse
> something), there is a tab where you can select a checkbox to export
> the folder as an AB and give it an AB name.

If someone on windows could test this new address book source as an imported 
addressbook source in OpenOffice it would be greatly appreciated. Pls report 
your findings to the list or better yet to your account on 
docs.opengroupware.org

many thanks in advance

Procedure:
Start OpenOffice writer
Tools>Datasources
This brings up the dialogue
NewDataSource>
	Name:			OGo Addressbook
	Databasetype: 	Addressbook
	DataSourceURL:	<defaults to>sdbcaddress:outlookXP
	Note: <click on ... so see options>
		[available options are:] 	LDAP addressbook
							Mozilla addressbook
							MS Outlook
							Windows addressbook <default>
Click on Tables: 	If there are no errors reported..were done here
				If errors are reported pls record and try MS Outlook as above.
				Then retry...if no errors then we are done here.
				If errors, well we are done as it does not work, pls report it so.

Assume all went well, Then;
Close dialogue
F4 brings up the beamer
Navigate to OGo Addressbook
Click on Tables.
Click on Table.
Addresses should appear in the beamer
Drag and drop an address to the text write application.
Record your observations. 
were done..:)

regards

/ch


From users@opengroupware.org  Thu Apr  8 13:57:44 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Thu, 08 Apr 2004 08:57:44 -0400
Subject: [OGo-Users] Performance
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
References: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAjHNoVETkrUmKLSrTBkdaQAEAAAAA@first-private.de>
Message-ID: <1081429064.3673.1.camel@localhost.localdomain>

> I have got a terribly bad performance-problem with OpenGroupware. 
> There are about 30 persons using our OpenGroupware-installation via
> web. I think this is not very much for a groupware solution. Anyhow we
> get response-delays of several seconds, even up to minutes when all
> users try to interact simultaniously with the system. 

OpenGroupware works the database pretty hard,  it is probably worth
while to spend a little time tuning PostgreSQL too.  The default
settings are pretty scant.
 
> I would be thankfull for any hints, how to speed up our
> OpenGroupware-installation

Also make sure your updating the statistics on your database on a
regular basis.


From users@opengroupware.org  Thu Apr  8 19:15:32 2004
From: users@opengroupware.org (Serge Mankovski)
Date: Thu, 08 Apr 2004 14:15:32 -0400
Subject: [OGo-Users] Can not login as root first time after install
Message-ID: <BAY12-F129YPKm1Yl2Z00034f4e@hotmail.com>

Hi
I installed (after many attempts) OpenGroupware on RH9.

Now I am trying to login onto root account. It does not let me in. I tried 
passwords "root", empty password, my root account real password... and 
nothing works.

When I start opengroupware with ./start.sh from opengroupware account I see 
a message that password for root account is not set up. May be this is the 
reason?
How do I set up initial root password?

Thank you
Serge

_________________________________________________________________
MSN Premium helps eliminate e-mail viruses. Get 2 months FREE*  
http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines


From users@opengroupware.org  Thu Apr  8 19:26:24 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Thu, 08 Apr 2004 14:26:24 -0400
Subject: [OGo-Users] Cannot compare NSCalendarDate with <>
Message-ID: <40759950.9090608@gonsman.com>

Red Hat 9, Apache 2.0.40

I am getting an error when I try to access the calendar.

Here is the error that displays:

Application Server caught exception:

  session: 079F079F044075915B
  element: 08a4075915f08f6e54c.1.17.1.1.1.3.0
  context: <0x08F6E54C[WOContext]: 08a4075915f08f6e54c app=OpenGroupware 
sn=079F079F044075915B eid=08a4075915f08f6e54c.1.17.1.1.1.3.0 rqeid=>
  request: <WORequest[0x0902DBEC]: method=GET 
uri=/OpenGroupware/x/dock?woinst=1951&page=SkySchedulerPage&cid=0894075915b08f6e54c&wosid=079F079F044075915B 
app=OpenGroupware rqKey=x rqPath=dock>

  class:   AssertException
  name:    AssertException
  reason:  Cannot compare NSCalendarDate with <>
  info:

The log file says this:

Apr 08 14:15:03 OpenGroupware [1951]: <SkyEnterpriseViewer> WARNING: 
missing context in component 0x08CEBADC (component is not awake)
Apr 08 14:15:03 OpenGroupware [1951]: <SkyProject4Viewer> WARNING: 
missing context in component 0x08D92DEC (component is not awake)
Apr 08 14:15:03 OpenGroupware [1951]: <(079F079F0240756CAD)>D sleep: lso 
<OGoContextSession[0x08B1F83C]: login=jgonsman tx=yes> commit.

After this error I must login again and I still can not access the 
calendar.  If I click around for a while and then click on Calendar, it 
goes away at some point (I know, not very reliable, but it's true).  
Once the calendar comes up OK, it seems to work OK for that user.  I 
don't know if it comes back ever.

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Thu Apr  8 19:43:41 2004
From: users@opengroupware.org (Matt M.)
Date: Thu, 08 Apr 2004 11:43:41 -0700
Subject: [OGo-Users] Can not login as root first time after install
In-Reply-To: <BAY12-F129YPKm1Yl2Z00034f4e@hotmail.com>
References: <BAY12-F129YPKm1Yl2Z00034f4e@hotmail.com>
Message-ID: <40759D5D.3020205@ironblue.com>

Serge Mankovski wrote:
> Hi
> I installed (after many attempts) OpenGroupware on RH9.
> 
> Now I am trying to login onto root account. It does not let me in. I 
> tried passwords "root", empty password, my root account real password... 
> and nothing works.
> 
> When I start opengroupware with ./start.sh from opengroupware account I 
> see a message that password for root account is not set up. May be this 
> is the reason?
> How do I set up initial root password?
> 

I just did the same. With the root account password empty, going to 
http://YOUR_SERVER/OpenGroupware should automatically log you in as root 
the first time. From there click on preferences, and click the password 
button in the upper right corner.

-- Matt M.


From users@opengroupware.org  Thu Apr  8 19:45:32 2004
From: users@opengroupware.org (Chris Gamache)
Date: Thu, 8 Apr 2004 11:45:32 -0700 (PDT)
Subject: [OGo-Users] New Commercial ZideLook + ZideStore
In-Reply-To: <20B9D87C-88CB-11D8-AFC5-00039340AF4A@opengroupware.org>
Message-ID: <20040408184532.99104.qmail@web13811.mail.yahoo.com>

--- Helge Hess <helge.hess@opengroupware.org> wrote:
> > There's a [+], but when I click it, it disappears.
> 
> Yes, thats the effect.

Feature? Bug?

> > If I create a Calendar event in Opengroupware, it appears as 
> > "non-busy" time in ZideLook, therefore the day in which the event 
> > occurs on the
> > calendar-at-a-glance is not in a bold font. I can't seem to find a 
> > spot in
> > OpenGroupware to set time as "Busy" ... I'm using the Slackware 
> > packages built
> > on 4/6/04 for my OGo installation.
> 
> I don't think I understand this. Currently all OGo events are reported 
> as busy events in the freebusy URL query.
> 

I don't think this is linked to the URL query. I have my Free-Busy URL set
properly. I'm not sure how to explain it better. I'll try, though. When I
create a event in outlook in my personal folders, it color is blue by default.
This means that I will be unavailable for anything else at that time. When I
create an event in OGo, using the web interface, the event's color is
transparent (if you can call transparent a color...) ... I can go into
ZideLook, and set the event to busy, and it is then colored blue, and the day
on the calendar is emboldened. That's the behavior that I would expect by
default. There is no option in OGo's Web Interface to modify this setting. I
wish you could just see it. I think you'd understand. 

CG

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway 
http://promotions.yahoo.com/design_giveaway/

From users@opengroupware.org  Thu Apr  8 22:50:36 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Thu, 08 Apr 2004 17:50:36 -0400
Subject: [OGo-Users] Timer Reports?
Message-ID: <4075C92C.7050009@gonsman.com>

I've done some extensive searching and I can't find any way to run a 
report on a project/company/task to get the minutes spent (using the 
timer) for a certain date range.  This is so useful when you bill 
clients by the hour to be able to look up the time spent for a given 
day/week/month/year.  And also to see what other people are spending 
their time doing.  Is this something that is available and is there any 
documentation?

-Sean

-- 
Sean Gonsman
http://www.gonsman.com
sean@gonsman.com



From users@opengroupware.org  Thu Apr  8 23:40:28 2004
From: users@opengroupware.org (Serge Mankovski)
Date: Thu, 08 Apr 2004 18:40:28 -0400
Subject: [OGo-Users] Re: Can not login as root first time after insta
Message-ID: <BAY12-F109SwMJwJhCB00024538@hotmail.com>

Hi,
I did a fresh install once more on a different computer. Result is the same
though.

First time I go on the web interface and  I do not get logged in. Ogo asks 
me for the
user name and password right during first connection to http:
//localhost/OpenGroupware

I searched the mail archives and it seems nobody complained about that 
before.

I am using Apache 2.0.49 and ngobjweb proxy. I use script to install it.

Serge


Matt M. <lmatt <at> ironblue.com> writes:
>
>Serge Mankovski wrote:
> > Hi
> > I installed (after many attempts) OpenGroupware on RH9.
> > > Now I am trying to login onto root account. It does not let me in. I > 
>tried passwords "root", empty password, my root account real password... > 
>and nothing works.
> > > When I start opengroupware with ./start.sh from opengroupware account 
>I > see a message that password for root account is not set up. May be this 
> > is the reason?
> > How do I set up initial root password?
> >
>
>I just did the same. With the root account password empty, going to 
>http://YOUR_SERVER/OpenGroupware should automatically log you in as root 
>the first time. From there click on preferences, and click the password 
>button in the upper right corner.
>

_________________________________________________________________
MSN Premium includes powerful parental controls and get 2 months FREE*   
http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines


From users@opengroupware.org  Fri Apr  9 02:51:44 2004
From: users@opengroupware.org (chris h)
Date: Thu, 8 Apr 2004 21:51:44 -0400
Subject: [OGo-Users] Timer Reports?
In-Reply-To: <4075C92C.7050009@gonsman.com>
References: <4075C92C.7050009@gonsman.com>
Message-ID: <200404082151.45113.chris123@magma.ca>

On April 8, 2004 05:50 pm, Sean Gonsman wrote:
> I've done some extensive searching and I can't find any way to run a
> report on a project/company/task to get the minutes spent (using the
> timer) for a certain date range.  This is so useful when you bill
> clients by the hour to be able to look up the time spent for a given
> day/week/month/year.  And also to see what other people are spending
> their time doing.  Is this something that is available and is there any
> documentation?

Don't use OGo for this hence  cannot comment.  Rather have been very pls'd 
with  http://www.journyx.com/support/552m1_changedoc.html JourneyX and its 
available at no cost with a limited user license. Builds on postgreql, 
python, zope, apache with a multitude of commercial addon's that allow full 
integration with commercial office suites. I understand support for OOo is in 
progress. 

regards

/ch


From users@opengroupware.org  Fri Apr  9 11:17:15 2004
From: users@opengroupware.org (Busra Erdem)
Date: Fri, 9 Apr 2004 03:17:15 -0700 (PDT)
Subject: [OGo-Users] Server error
Message-ID: <20040409101715.63233.qmail@web13011.mail.yahoo.com>

I am using Redhat 9.0. I installed OGO, but it doesn't
work. When I wrote "http://localhost/OpenGroupware" on
browser, it gives this message,
"
Server error!

    The server encountered an internal error and was
unable to complete your request. Either the server is
overloaded or there was an error in a CGI script. 
".

How can I solve?

And also I don't have opengroupware user. How do I create?

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway 
http://promotions.yahoo.com/design_giveaway/

From users@opengroupware.org  Fri Apr  9 11:53:32 2004
From: users@opengroupware.org (Luca)
Date: Fri, 09 Apr 2004 12:53:32 +0200
Subject: [OGo-Users] Server error
In-Reply-To: <20040409101715.63233.qmail@web13011.mail.yahoo.com>
References: <20040409101715.63233.qmail@web13011.mail.yahoo.com>
Message-ID: <407680AC.7080804@ianus.ws>

Busra Erdem wrote:

>I am using Redhat 9.0. I installed OGO, but it doesn't
>work. When I wrote "http://localhost/OpenGroupware" on
>browser, it gives this message,
>"
>Server error!
>
>    The server encountered an internal error and was
>unable to complete your request. Either the server is
>overloaded or there was an error in a CGI script. 
>".
>
>How can I solve?
>
A) read documentation about mod_ngobjweb
B) check wether OGo process is running
C) try to connect directly to OGo process instead of Apache

You need to clarify as best as you can your issue, since we can't help 
you much with informations you provide.

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Fri Apr  9 15:46:18 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 9 Apr 2004 16:46:18 +0200
Subject: [OGo-Users] Timer Reports?
In-Reply-To: <4075C92C.7050009@gonsman.com>
References: <4075C92C.7050009@gonsman.com>
Message-ID: <A8BE84D8-8A34-11D8-AFC5-00039340AF4A@opengroupware.org>

On 08.04.2004, at 23:50, Sean Gonsman wrote:
> I've done some extensive searching and I can't find any way to run a 
> report on a project/company/task to get the minutes spent (using the 
> timer) for a certain date range.

Yes, nothing like this is available in the moment. The only minimal 
report is the task tab in the project view, but it only totals all the 
tasks of the project.

> This is so useful when you bill clients by the hour to be able to look 
> up the time spent for a given day/week/month/year.  And also to see 
> what other people are spending their time doing.

Yes, sounds quite useful, feel free to post an enhancement request in 
Bugzilla:
   http://bugzilla.opengroupware.org/

best regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Fri Apr  9 15:55:03 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 9 Apr 2004 16:55:03 +0200
Subject: [OGo-Users] Webdav & file attributes
In-Reply-To: <200404071504.27025.chris123@magma.ca>
References: <200404071504.27025.chris123@magma.ca>
Message-ID: <E1CAD230-8A35-11D8-AFC5-00039340AF4A@opengroupware.org>

On 07.04.2004, at 21:04, chris h wrote:
> Dont think this is a bug, rather an observation.

I've created a bugreport for this and added your comments:

   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=710

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Mon Apr 12 01:17:32 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Sun, 11 Apr 2004 21:17:32 -0300
Subject: [OGo-Users] Question on load distribution among servers
Message-ID: <c5cn6o$7qb$1@sea.gmane.org>

Hi
It seems pretty simple to have the database on another server by 
adjusting LSConnectionDictionary.

Is it possible to have OGo in a server and Apache in another?
(does this make sense???)

Olivier


From users@opengroupware.org  Mon Apr 12 10:11:10 2004
From: users@opengroupware.org (Louis-David Mitterrand)
Date: Mon, 12 Apr 2004 11:11:10 +0200
Subject: [OGo-Users] appointment minutes drop-down list in webui
Message-ID: <20040412091109.GA5173@apartia.fr>

Hi,

Is it possible to configure the minutes drop-down list in the webui to
display only in steps of 5? 

For instance when entering a new appointment it is seldom useful to have
a granularity of 1 minute. Currently the minutes drop-down list with its
60 items seems really too much for everyday use.

I couldn't find any way to change that default. Is there one?

Thanks,

-- 
ldm@apartia.fr

From users@opengroupware.org  Mon Apr 12 19:22:07 2004
From: users@opengroupware.org (Chris Gamache)
Date: Mon, 12 Apr 2004 11:22:07 -0700 (PDT)
Subject: [OGo-Users] Question on load distribution among servers
In-Reply-To: <c5cn6o$7qb$1@sea.gmane.org>
Message-ID: <20040412182207.27458.qmail@web13807.mail.yahoo.com>

--- Olivier Hallot <olivier@ig.com.br> wrote:
> Hi
> It seems pretty simple to have the database on another server by 
> adjusting LSConnectionDictionary.

Indeed. We have a single dedicated PostgreSQL server for all of our distributed
applications. OGo runs perfectly on a seperate server. 
 
> Is it possible to have OGo in a server and Apache in another?
> (does this make sense???)

It is most certainly possible. Will it give you any added increase in speed?
That depends... Unless Apache is responsible for things other than OGo, my
guess is that moving the Apache front end onto a different server won't benefit
OGo performance. However, if your Apache does more than just act as a front-end
for OGo, it might like having a server all to itself. Find your bottleneck:
profile each of the applications under a normal to medium-high load, and see if
you're running out of resources. 

CG

__________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online by April 15th
http://taxes.yahoo.com/filing.html

From users@opengroupware.org  Tue Apr 13 12:05:02 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Tue, 13 Apr 2004 13:05:02 +0200 (CEST)
Subject: [OGo-Users] how to define your browser language to manage with opengroupware
Message-ID: <20040413110502.84403.qmail@web25106.mail.ukl.yahoo.com>

--0-60976961-1081854302=:83908
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

hello
i install opengroupware and i found the template user but in the user configuration the settings are :
  Afspraken  
  Projecten  
  Uiterlijk  
  Nieuws  
  E-mail  
  Taken  
  Palm synchronisatie  
  Bedrijven / Personen  
and all the configuration is in german and i need help to change german in French .( please i install opengroupware with linux RedHat 9.0)
 
Sam SODATONOU
 

		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-60976961-1081854302=:83908
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>hello</DIV>
<DIV>i install opengroupware and i found the template user but in the user configuration the settings are :</DIV>
<DIV>&nbsp; Afspraken&nbsp; <BR>&nbsp; Projecten&nbsp; <BR>&nbsp; Uiterlijk&nbsp; <BR>&nbsp; Nieuws&nbsp; <BR>&nbsp; E-mail&nbsp; <BR>&nbsp; Taken&nbsp; <BR>&nbsp; Palm synchronisatie&nbsp; <BR>&nbsp; Bedrijven / Personen&nbsp; </DIV>
<DIV>and all the configuration is in german and i need help to change german in French .( please i install opengroupware with linux RedHat 9.0)</DIV>
<DIV>&nbsp;</DIV>
<DIV>Sam SODATONOU</DIV>
<DIV>&nbsp;</DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-60976961-1081854302=:83908--

From users@opengroupware.org  Tue Apr 13 17:41:55 2004
From: users@opengroupware.org (J.S. Jorritsma)
Date: Tue, 13 Apr 2004 12:41:55 -0400
Subject: [OGo-Users] how to define your browser language to manage with
 opengroupware
In-Reply-To: <20040413110502.84403.qmail@web25106.mail.ukl.yahoo.com>
References: <20040413110502.84403.qmail@web25106.mail.ukl.yahoo.com>
Message-ID: <407C1853.9090609@aboveit.nl>

The language yo are seeing is dutch by the way.

As the ogo user you can do on the prompt:

Defaults write NSGlobalDomain Languages "( French )"
This will only change the settings for your template user, not for the 
root user (if I'm not mistaken)

or you can just alter the Default language for the 'Template' user in 
(as the root user):

'usermanager' --> 'list all' --> select 'Template' user
and select your prefered language

If your gui is in dutch:

'Administratie' -> 'Volledige lijst' --> select 'Template' user
and select your prefered language

Again if your root gui is in Dutch you can change that in the 
preferences for the root user

'Instellingen' --> 'Uiterlijk'
and select your prefered language.

To see the changes you have to log out and in again.


Good luck!

Jorrit

SODATONOU Dodji Samuel wrote:

> hello
> i install opengroupware and i found the template user but in the user 
> configuration the settings are :
>   Afspraken 
>   Projecten 
>   Uiterlijk 
>   Nieuws 
>   E-mail 
>   Taken 
>   Palm synchronisatie 
>   Bedrijven / Personen 
> and all the configuration is in german and i need help to change 
> german in French .( please i install opengroupware with linux RedHat 9.0)
>  
> Sam SODATONOU
>  
>
> ------------------------------------------------------------------------
> Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
> Créez votre Yahoo! Mail 
> <http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/> 
>
>
> Dialoguez en direct avec vos amis grâce à Yahoo! Messenger ! 
> <http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/> 




From users@opengroupware.org  Tue Apr 13 18:14:15 2004
From: users@opengroupware.org (J.S. Jorritsma)
Date: Tue, 13 Apr 2004 13:14:15 -0400
Subject: [OGo-Users] administration --> defaults
Message-ID: <407C1FE7.8080104@aboveit.nl>

Hi all,

Does anyone know why the defaults in the Administration area (user = 
root) are only available for German and English?

I can see the paragraph headers like:

*Application Server Settings*
*Global Settings

*etc.

but there are no entries below, nor can I edit them in Dutch, and I also 
tried Italian

tia.

Regards,

Jorrit
*

*

From users@opengroupware.org  Tue Apr 13 14:39:21 2004
From: users@opengroupware.org (Luca)
Date: Tue, 13 Apr 2004 15:39:21 +0200
Subject: [OGo-Users] administration --> defaults
In-Reply-To: <407C1FE7.8080104@aboveit.nl>
References: <407C1FE7.8080104@aboveit.nl>
Message-ID: <407BED89.1080307@ianus.ws>

J.S. Jorritsma wrote:

> Does anyone know why the defaults in the Administration area (user = 
> root) are only available for German and English? 

I don't know why, but it looks like there's an open bug:

http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=361

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Mon Apr 12 21:19:15 2004
From: users@opengroupware.org (Brendon Baumgartner)
Date: Mon, 12 Apr 2004 13:19:15 -0700
Subject: [OGo-Users] zidestore/zidelook confusion - what do you purchase?
Message-ID: <!~!AAAAAAzY7EKpVblHm0IoQvIPfE0EciIA@brendon.com>

This is a multi-part message in MIME format.

------=_NextPart_000_0004_01C42090.C12C4560
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hello,

I've been evaluating Opengroupware for a client and I've got the basics
running and attached to a cyrus server. I'm confused on the Outlook
connector issue. According to Skyrix's website " ZideStore is now part =
of
OpenGroupware.org," but according to other posts on this mailing list, a
Zidestore server AND/OR an opengroupware calendaring server is required =
for
mozilla and other icalendar clients.

I see there are files in OGo with zidestore in the name. If Zidestore IS =
in
OGo, where is it and how do you set it up?

tia.

Brendon

--=20
=A0_BB
=A0


------=_NextPart_000_0004_01C42090.C12C4560
Content-Type: application/ms-tnef;
	name="winmail.dat"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
	filename="winmail.dat"
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==

------=_NextPart_000_0004_01C42090.C12C4560--


From users@opengroupware.org  Wed Apr 14 00:40:15 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Tue, 13 Apr 2004 19:40:15 -0400
Subject: [OGo-Users] zidestore/zidelook confusion - what do you purchase?
In-Reply-To: <!~!AAAAAAzY7EKpVblHm0IoQvIPfE0EciIA@brendon.com>
References: <!~!AAAAAAzY7EKpVblHm0IoQvIPfE0EciIA@brendon.com>
Message-ID: <200404131940.15806.chris123@magma.ca>

On April 12, 2004 04:19 pm, Brendon Baumgartner wrote:
> Hello,
>
> I've been evaluating Opengroupware for a client and I've got the basics
> running and attached to a cyrus server. I'm confused on the Outlook
> connector issue. According to Skyrix's website " ZideStore is now part of
> OpenGroupware.org," but according to other posts on this mailing list, a
> Zidestore server AND/OR an opengroupware calendaring server is required for
> mozilla and other icalendar clients.
>
> I see there are files in OGo with zidestore in the name. If Zidestore IS in
> OGo, where is it and how do you set it up?

Zidestore is the server, this ships with the OGo server under a suitable GPL 
type license. ZideLook is the commercial pluggin that must be installed on 
win32 systems to allow Outlook to talk to OGo via the Zidestore server..:)

The naming convention tripped me up as well originally but once you get 
familiar with it, its all rather straight forward.

The pluggin is available from the sponsors home page, http://www.skyrix.com 
then look for the link to zidestore pluggin.

Best regards

/ch

From users@opengroupware.org  Wed Apr 14 03:32:31 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Tue, 13 Apr 2004 22:32:31 -0400
Subject: [OGo-Users] OGo and VoiceIP
Message-ID: <200404132232.32737.chris123@magma.ca>

Greets

Vonage.ca has just introduced services in Canada. Was wondering if anyone has 
done any work on integrating OGo with VoiceIP services and or hardware.

regards

/ch

From users@opengroupware.org  Wed Apr 14 03:35:01 2004
From: users@opengroupware.org (Brendon Baumgartner)
Date: Tue, 13 Apr 2004 19:35:01 -0700
Subject: [OGo-Users] zidestore/zidelook confusion - what do you purchase?
In-Reply-To: <200404131940.15806.chris123@magma.ca>
Message-ID: <20040414023502.0CF5A9C4C@solara.netcal.com>

> From: users-admin@opengroupware.org [mailto:users-admin@opengroupware.org]
> On Behalf Of Chris Herrnberger
> Sent: Tuesday, April 13, 2004 4:40 PM
> To: users@opengroupware.org
> Subject: Re: [OGo-Users] zidestore/zidelook confusion - what do you
> purchase?
> 
> On April 12, 2004 04:19 pm, Brendon Baumgartner wrote:
> > Hello,
> >
> > I've been evaluating Opengroupware for a client and I've got the basics
> > running and attached to a cyrus server. I'm confused on the Outlook
> > connector issue. According to Skyrix's website " ZideStore is now part
> of
> > OpenGroupware.org," but according to other posts on this mailing list, a
> > Zidestore server AND/OR an opengroupware calendaring server is required
> for
> > mozilla and other icalendar clients.
> >
> > I see there are files in OGo with zidestore in the name. If Zidestore IS
> in
> > OGo, where is it and how do you set it up?
> 
> Zidestore is the server, this ships with the OGo server under a suitable
> GPL
> type license. ZideLook is the commercial pluggin that must be installed on
> win32 systems to allow Outlook to talk to OGo via the Zidestore server..:)

Okay. Is there documentation on configuring Zidestore? I've got OGo running.

> The naming convention tripped me up as well originally but once you get
> familiar with it, its all rather straight forward.
> 
> The pluggin is available from the sponsors home page,
> http://www.skyrix.com
> then look for the link to zidestore pluggin.

Wait, I thought you just said "Zidestore is the server, this ships with the
OGo server...?" Now you say download Zidestore? ...or do I need to install
Zidestore also? Or by Zidestore plugin, do you mean Zidelook?

Are you also trying to confuse me? Is this a game? :)

Regards,

-- 
 _BB
 

> -----Original Message-----


From users@opengroupware.org  Wed Apr 14 03:54:00 2004
From: users@opengroupware.org (Chris Herrnberger)
Date: Tue, 13 Apr 2004 22:54:00 -0400
Subject: [OGo-Users] zidestore/zidelook confusion - what do you purchase?
In-Reply-To: <20040414023502.0CF5A9C4C@solara.netcal.com>
References: <20040414023502.0CF5A9C4C@solara.netcal.com>
Message-ID: <200404132254.00539.chris123@magma.ca>

On April 13, 2004 10:35 pm, Brendon Baumgartner wrote:
> > From: users-admin@opengroupware.org
> > [mailto:users-admin@opengroupware.org] On Behalf Of Chris Herrnberger
> > Sent: Tuesday, April 13, 2004 4:40 PM
> > To: users@opengroupware.org
> > Subject: Re: [OGo-Users] zidestore/zidelook confusion - what do you
> > purchase?
> >
> > On April 12, 2004 04:19 pm, Brendon Baumgartner wrote:
> > > Hello,
> > >
> > > I've been evaluating Opengroupware for a client and I've got the basics
> > > running and attached to a cyrus server. I'm confused on the Outlook
> > > connector issue. According to Skyrix's website " ZideStore is now part
> >
> > of
> >
> > > OpenGroupware.org," but according to other posts on this mailing list,
> > > a Zidestore server AND/OR an opengroupware calendaring server is
> > > required
> >
> > for
> >
> > > mozilla and other icalendar clients.
> > >
> > > I see there are files in OGo with zidestore in the name. If Zidestore
> > > IS
> >
> > in
> >
> > > OGo, where is it and how do you set it up?
> >
> > Zidestore is the server, this ships with the OGo server under a suitable
> > GPL
> > type license. ZideLook is the commercial pluggin that must be installed
> > on win32 systems to allow Outlook to talk to OGo via the Zidestore
> > server..:)
>
> Okay. Is there documentation on configuring Zidestore? I've got OGo
> running.
 
tons...see the FAQ, setup notes at the main project site and the 
docs.opengroupware.org site for user contributed docs and notes. 

> > The naming convention tripped me up as well originally but once you get
> > familiar with it, its all rather straight forward.
> >
> > The pluggin is available from the sponsors home page,
> > http://www.skyrix.com
> > then look for the link to zidestore pluggin.
>
> Wait, I thought you just said "Zidestore is the server, this ships with the
> OGo server...?" Now you say download Zidestore? ...or do I need to install
> Zidestore also? Or by Zidestore plugin, do you mean Zidelook?

yes.

> Are you also trying to confuse me? Is this a game? :)

Some very elemental reading would be a very productive exercise. pls see 
anyone (or all) of the following:

http://www.skyrix.de
http://opengroupware.org (even comes with a two search functions)
http://docs.opengroupware.org (also comes with a search function)

Best regards

/ch


From users@opengroupware.org  Wed Apr 14 04:23:29 2004
From: users@opengroupware.org (Brendon Baumgartner)
Date: Tue, 13 Apr 2004 20:23:29 -0700
Subject: [OGo-Users] zidestore/zidelook confusion - what do you purchase?
In-Reply-To: <200404132254.00539.chris123@magma.ca>
Message-ID: <20040414032329.E94BF9C38@solara.netcal.com>

> From: users-admin@opengroupware.org [mailto:users-admin@opengroupware.org]
> On Behalf Of Chris Herrnberger
> Sent: Tuesday, April 13, 2004 7:54 PM
> To: users@opengroupware.org
> Subject: Re: [OGo-Users] zidestore/zidelook confusion - what do you
> purchase?

<..snip...>

> > >
> > > The pluggin is available from the sponsors home page,
> > > http://www.skyrix.com
> > > then look for the link to zidestore pluggin.
> >
> > Wait, I thought you just said "Zidestore is the server, this ships with
> the
> > OGo server...?" Now you say download Zidestore? ...or do I need to
> install
> > Zidestore also? Or by Zidestore plugin, do you mean Zidelook?
> 
> yes.
> 
> > Are you also trying to confuse me? Is this a game? :)
> 
> Some very elemental reading would be a very productive exercise. pls see
> anyone (or all) of the following:
> 
> http://www.skyrix.de
> http://opengroupware.org (even comes with a two search functions)
> http://docs.opengroupware.org (also comes with a search function)

I've read everything except for the .de site because it is in german, but I
did read the .com one.

Maybe I'm at a disadvantage because of my german. 

Sorry for asking an apparently obvious question. I will re-read again.

Thanks for the tips.

--bb




From users@opengroupware.org  Wed Apr 14 09:35:57 2004
From: users@opengroupware.org (Roland Plugge)
Date: Wed, 14 Apr 2004 10:35:57 +0200
Subject: [OGo-Users] ogo login automatically
Message-ID: <013b01c421fb$8295a690$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_0138_01C4220C.45BFB4C0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Is there another way to login into ogo by either

1. supplying a list of available users on the login page (buttons or =
picklist). Entering a password isn't strictly neccessary. I don't mind =
building the list manually by entering the usernames into the =
html-template.

2. typing a username into the url (after the ? e.g.) so ogo =
automatically logs in (by using DirectAction or so???)

Regards,

Roland Plugge
------=_NextPart_000_0138_01C4220C.45BFB4C0
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Is there another way to login into ogo =
by=20
either</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>1. supplying a list of available users =
on the login=20
page (buttons or picklist). Entering a password isn't strictly =
neccessary. I=20
don't mind building the list manually by entering the usernames into the =

html-template.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>2. typing a username into the url =
(after the ?=20
e.g.) so ogo automatically logs in (by using DirectAction or =
so???)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Roland =
Plugge</FONT></DIV></BODY></HTML>

------=_NextPart_000_0138_01C4220C.45BFB4C0--


From users@opengroupware.org  Wed Apr 14 13:00:56 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 14 Apr 2004 14:00:56 +0200
Subject: [OGo-Users] OGo and VoiceIP
In-Reply-To: <200404132232.32737.chris123@magma.ca>
References: <200404132232.32737.chris123@magma.ca>
Message-ID: <62FA72EC-8E0B-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 14, 2004, at 4:32 AM, Chris Herrnberger wrote:
> Vonage.ca has just introduced services in Canada. Was wondering if 
> anyone has
> done any work on integrating OGo with VoiceIP services and or hardware.

No, but this might be relevant:
   http://docs.opengroupware.org/Members/helge/CTI/

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Wed Apr 14 13:43:21 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Wed, 14 Apr 2004 14:43:21 +0200 (CEST)
Subject: [OGo-Users] problème d'image
Message-ID: <20040414124321.64474.qmail@web25106.mail.ukl.yahoo.com>

--0-867945917-1081946601=:64337
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

hello
 
j'ai installé opengroupware et il se démarre proprement mais je ne vois pas les images . D'autre part j'ai lu les faq mais par contre mon répertoire /opt/opengroupware.org/news ne contient aucun image et les images pointes vers des liens http du type http://servername/missingImage?picture.gif d'autre part certaines images ne possède pas de lien.
je vous en prie aider moi à resoudre ce problème d'image
merci
sam sodatonou
 

		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-867945917-1081946601=:64337
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>hello</DIV>
<DIV>&nbsp;</DIV>
<DIV>j'ai installé opengroupware et il se démarre proprement mais je ne vois pas les images . D'autre part j'ai lu les faq mais par contre mon répertoire /opt/opengroupware.org/news ne contient aucun image et les images pointes vers des liens http du type <A href="http://servername">http://servername</A>/missingImage?picture.gif d'autre part certaines images ne possède pas de lien.</DIV>
<DIV>je vous en prie aider moi à resoudre ce problème d'image</DIV>
<DIV>merci</DIV>
<DIV>sam sodatonou</DIV>
<DIV>&nbsp;</DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-867945917-1081946601=:64337--

From users@opengroupware.org  Wed Apr 14 13:57:53 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Wed, 14 Apr 2004 14:57:53 +0200 (CEST)
Subject: [OGo-Users] picture problem
Message-ID: <20040414125753.44881.qmail@web25104.mail.ukl.yahoo.com>

--0-1527552954-1081947473=:44544
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

hello
i install opengroupware and i can connect to it but i didn't find the picture in the web page , i read the faq about pictures but in my /opt/opengroupware/news i didn't have a pic file , please i need your help to solve this problem
 
thanks
 
sam sodatonou

		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-1527552954-1081947473=:44544
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>hello</DIV>
<DIV>i install opengroupware and i can connect to it but i didn't find the picture in the web page , i read the faq about pictures but in my /opt/opengroupware/news i didn't have a pic file , please i need your help to solve this problem</DIV>
<DIV>&nbsp;</DIV>
<DIV>thanks</DIV>
<DIV>&nbsp;</DIV>
<DIV>sam sodatonou</DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-1527552954-1081947473=:44544--

From users@opengroupware.org  Wed Apr 14 14:13:42 2004
From: users@opengroupware.org (David Kyte)
Date: Wed, 14 Apr 2004 14:13:42 +0100
Subject: [OGo-Users] HD Install of Knoppix product
Message-ID: <MOBBKMBKMHLJOHDKNIHHCEFJGFAA.dave@microamps.com>

Hi

I'd like to run an extended trial using the ogo-knoppix CD.

When I do an kpx-hdinstall all gets installed except the
groupware is no longer configured.

Please can anyone talk me through installing this onto a Hard Disk

Thanks

Dave




From users@opengroupware.org  Wed Apr 14 14:48:45 2004
From: users@opengroupware.org (Roland Plugge)
Date: Wed, 14 Apr 2004 15:48:45 +0200
Subject: [OGo-Users] ogo booking resources without participants
Message-ID: <015001c42227$350a1a60$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_014D_01C42237.F8311B50
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Is there a way to make a resource appointment (say reservation of a =
beamer) without inviting people. So nobody owns the appointment.

For example, 3 people have their own (shared) agenda and there's a =
beamer and another resource called 'conference room'.
Next the room is booked by a third party without any of the 3 people =
being invited. Only one of the 3 users enters the reservation but all =
users can see/edit it.
Futhermore I want the resource to be claimed busy, while the user who =
entered the reservation is (of course) still available.

I thought of three possibilities which I think both aren't very nice:
1) new user 'conference room' instead of a resource
2) new user 'reservation' and invite this 'user' for every reservation, =
which means that if someone else (not a user) books the 'beamer' =
resource at the same time as the room above user 'reservation' is again =
invited (twice).
3) make the 3rd party a ogo user (each customer as a user)

Now another example with exposition A and B. An exposition doesn't =
'invite' any of the users but only claims a resource such as room X. Is =
there another way of establishing this other then making a user =
'exposition A'???

Any suggestions?

Roland Plugge

------=_NextPart_000_014D_01C42237.F8311B50
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Is there a way to make a resource =
appointment (say=20
reservation of a beamer) without inviting&nbsp;people. So nobody owns =
the=20
appointment.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>For example, 3 people have their own =
(shared)=20
agenda and there's a beamer and another resource called 'conference=20
room'.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Next the room is booked by a third =
party without=20
any of the 3 people being invited. Only one of the 3 users enters the=20
reservation but all users can see/edit it.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Futhermore I want the resource to be =
claimed busy,=20
while the user who entered the reservation is (of course) still=20
available.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I thought of&nbsp;three possibilities =
which I think=20
both aren't very nice:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>1) new user 'conference room' instead =
of a=20
resource</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>2) new user 'reservation' and invite =
this 'user'=20
for every reservation, which means that if someone else (not a user) =
books the=20
'beamer' resource at the same time as the room above user 'reservation' =
is again=20
invited (twice).</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>3) make the 3rd party a ogo user (each =
customer as=20
a user)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Now another example with exposition A =
and B. An=20
exposition doesn't 'invite' any of the users but only claims a resource =
such as=20
room X. Is there another way of establishing this other then making a =
user=20
'exposition A'???</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Any suggestions?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Roland Plugge</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV></BODY></HTML>

------=_NextPart_000_014D_01C42237.F8311B50--


From users@opengroupware.org  Wed Apr 14 14:52:07 2004
From: users@opengroupware.org (Luca)
Date: Wed, 14 Apr 2004 15:52:07 +0200
Subject: [OGo-Users] Problem on Calendar/Contacts
Message-ID: <407D4207.2010800@ianus.ws>

Hello,

I'm experiencing a strange Calendar/Contacts behaviour: opening a new 
session, if I create a new appointment adding a contact 'contact1' as a 
participant, I can see it listed in 'participants' tab of the 
appointment itself. If I click on that link, 'contact1' leaks a lot of 
fiels (I checked for 'Comment', 'Email1', 'Email2', 'Telephone1', 
Telephone2', Telephone Private', 'Fax' and 'Fax Private'; maybe there 
are more missing). If I go on Contacts->Search 'contact1', I see all 
fields filled with proper values.
And now there's the funny part: during the same session, if I go back in 
calendar->'appointment'->participants->'contact1', I see fields properly 
filled now!!

I really feel this is a bug, but I'm asking if someone has noticed this 
before. If this behaviour is not expected (I'm quite sure about it), 
I'll open a bug.

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Wed Apr 14 15:21:52 2004
From: users@opengroupware.org (M3 Freak)
Date: Wed, 14 Apr 2004 10:21:52 -0400
Subject: [OGo-Users] zidestore/zidelook confusion - what do you
 purchase?
In-Reply-To: <20040414032329.E94BF9C38@solara.netcal.com>
References: <20040414032329.E94BF9C38@solara.netcal.com>
Message-ID: <1081952512.4490.33.camel@kanwar>

On Tue, 2004-04-13 at 23:23, Brendon Baumgartner wrote:
> > Some very elemental reading would be a very productive exercise. pls see
> > anyone (or all) of the following:
> > 
> > http://www.skyrix.de
> > http://opengroupware.org (even comes with a two search functions)
> > http://docs.opengroupware.org (also comes with a search function)
> 
> I've read everything except for the .de site because it is in german, but I
> did read the .com one.
> 
> Maybe I'm at a disadvantage because of my german. 
> 
> Sorry for asking an apparently obvious question. I will re-read again.
> 
> Thanks for the tips.

Simple explanation:

1. OGo by itself comes with ZideStore.
2. OGo+ZideStore can talk to Outlook with the ZideLook Connector
3. ZideLook is proprietary and must be licensed.
4. When you purchase ZideLook, you also have to install a ZideStore
package from SKYRiX.
5. The ZideStore package from SKYRiX is used to manage the LICENSE keys
for ZideLook!

I think I've explained that right...

HTH,

Kanwar
Systems Aligned Inc.
www.systemsaligned.com




From users@opengroupware.org  Wed Apr 14 16:02:01 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 14 Apr 2004 17:02:01 +0200
Subject: [OGo-Users] Problem on Calendar/Contacts
In-Reply-To: <407D4207.2010800@ianus.ws>
References: <407D4207.2010800@ianus.ws>
Message-ID: <AF599F60-8E24-11D8-AE1D-000393C29C2A@opengroupware.org>

On 14.04.2004, at 15:52, Luca wrote:
> I'm experiencing a strange Calendar/Contacts behaviour: opening a new 
> session, if I create a new appointment adding a contact 'contact1' as 
> a participant, I can see it listed in 'participants' tab of the 
> appointment itself. If I click on that link, 'contact1' leaks a lot of 
> fiels (I checked for 'Comment', 'Email1', 'Email2', 'Telephone1', 
> Telephone2', Telephone Private', 'Fax' and 'Fax Private'; maybe there 
> are more missing). If I go on Contacts->Search 'contact1', I see all 
> fields filled with proper values.
> And now there's the funny part: during the same session, if I go back 
> in calendar->'appointment'->participants->'contact1', I see fields 
> properly filled now!!
>
> I really feel this is a bug, but I'm asking if someone has noticed 
> this before. If this behaviour is not expected (I'm quite sure about 
> it), I'll open a bug.

This should be:
   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=693

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Wed Apr 14 16:07:23 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 14 Apr 2004 17:07:23 +0200
Subject: [OGo-Users] ogo booking resources without participants
In-Reply-To: <015001c42227$350a1a60$0100000a@athlon>
References: <015001c42227$350a1a60$0100000a@athlon>
Message-ID: <6EE43BCA-8E25-11D8-AE1D-000393C29C2A@opengroupware.org>

On 14.04.2004, at 15:48, Roland Plugge wrote:
> Is there a way to make a resource appointment (say reservation of a=20
> beamer) without inviting=A0people. So nobody owns the appointment.

No.

> I thought of=A0three possibilities which I think both aren't very =
nice:
> 1) new user 'conference room' instead of a resource

Yes, also possible.

> 2) new user 'reservation' and invite this 'user' for every=20
> reservation, which means that if someone else (not a user) books the=20=

> 'beamer' resource at the same time as the room above user=20
> 'reservation' is again invited (twice).

I don't understand this one.

> 3) make the 3rd party a ogo user (each customer as a user)

Not sure what you mean by "3rd party".


Note that the meeting participant isn't required to be a real user, it=20=

can be a regular contact as well.

regards,
   Helge
--=20
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Wed Apr 14 16:25:22 2004
From: users@opengroupware.org (Luca)
Date: Wed, 14 Apr 2004 17:25:22 +0200
Subject: [OGo-Users] Problem on Calendar/Contacts
In-Reply-To: <AF599F60-8E24-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <407D4207.2010800@ianus.ws> <AF599F60-8E24-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <407D57E2.1040805@ianus.ws>

Helge Hess wrote:

> This should be:
>   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=693

Yes, you are right.

I added informations to bug #693

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Wed Apr 14 17:42:50 2004
From: users@opengroupware.org (chris h)
Date: Wed, 14 Apr 2004 12:42:50 -0400
Subject: [OGo-Users] zidestore/zidelook confusion - what do you purchase?
In-Reply-To: <20040414032329.E94BF9C38@solara.netcal.com>
References: <20040414032329.E94BF9C38@solara.netcal.com>
Message-ID: <200404141242.50963.chris123@magma.ca>

On April 13, 2004 11:23 pm, Brendon Baumgartner wrote:

>
> Maybe I'm at a disadvantage because of my german.
>
> Sorry for asking an apparently obvious question. I will re-read again.
>
> Thanks for the tips.

Nah, its because Im an idiot and send your the wrong URL...;) Sorry bout that. 
The reference should have read http://www.skyrix.com 

Basically all you need is the pluggin (called zidelook) from the site above. 
Its a commercial product. M3 did a nice job laying it our for you.

Best of luck

/ch

From users@opengroupware.org  Wed Apr 14 17:43:16 2004
From: users@opengroupware.org (chris h)
Date: Wed, 14 Apr 2004 12:43:16 -0400
Subject: [OGo-Users] OGo and VoiceIP
In-Reply-To: <62FA72EC-8E0B-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <200404132232.32737.chris123@magma.ca> <62FA72EC-8E0B-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <200404141243.16500.chris123@magma.ca>

On April 14, 2004 08:00 am, Helge Hess wrote:
> On Apr 14, 2004, at 4:32 AM, Chris Herrnberger wrote:
> > Vonage.ca has just introduced services in Canada. Was wondering if
> > anyone has
> > done any work on integrating OGo with VoiceIP services and or hardware.
>
> No, but this might be relevant:
>    http://docs.opengroupware.org/Members/helge/CTI/

tks

/ch

From users@opengroupware.org  Wed Apr 14 19:18:48 2004
From: users@opengroupware.org (Roland Plugge)
Date: Wed, 14 Apr 2004 20:18:48 +0200
Subject: [OGo-Users] ogo booking resources without participants
References: <015001c42227$350a1a60$0100000a@athlon> <6EE43BCA-8E25-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <016201c4224c$ee9b23a0$0100000a@athlon>

Is there really no other way to make a reservation for a resource only???
(see below @2/3)

> On 14.04.2004, at 15:48, Roland Plugge wrote:
> > Is there a way to make a resource appointment (say reservation of a
> > beamer) without inviting people. So nobody owns the appointment.
>
> No.
>
> > I thought of three possibilities which I think both aren't very nice:
> > 1) new user 'conference room' instead of a resource
>
> Yes, also possible.
>
> > 2) new user 'reservation' and invite this 'user' for every
> > reservation, which means that if someone else (not a user) books the
> > 'beamer' resource at the same time as the room above user
> > 'reservation' is again invited (twice).
>
> I don't understand this one.

@2:
Say there are rooms 1 and 2, secondly expositions A and B.
Now exposistion A claims resource 'room 1' inviting participant named
'reservation' (which is a ogo-user).
This is the only way of booking a room without a real user.
Unfortunately exposition B which reserves room 2, also 'invites' the same
user.

>
> > 3) make the 3rd party a ogo user (each customer as a user)
>
> Not sure what you mean by "3rd party".
>

@3:
Make a new user (or contact) named 'exposition A' and add as participant in
an appointment reserving 'room 1'.
Or the same for 'customer X' (3rd party) who claims 'room 1' within an
appointment. Note that I actually don't want all possible
customers/expositions entered (as user or contact) into the system.


>
> Note that the meeting participant isn't required to be a real user, it
> can be a regular contact as well.
>
> regards,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge
> OpenGroupware.org
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>
>


From users@opengroupware.org  Thu Apr 15 00:11:31 2004
From: users@opengroupware.org (Roland Plugge)
Date: Thu, 15 Apr 2004 01:11:31 +0200
Subject: [OGo-Users] ogo booking resources without participants
References: <015001c42227$350a1a60$0100000a@athlon> <6EE43BCA-8E25-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <01af01c42275$d2efb7a0$0100000a@athlon>

> On 14.04.2004, at 15:48, Roland Plugge wrote:
> > Is there a way to make a resource appointment (say reservation of a
> > beamer) without inviting people. So nobody owns the appointment.
>
> No.
>
> Note that the meeting participant isn't required to be a real user, it
> can be a regular contact as well.
> regards,
>    Helge

How about setting the participant to a company?
Is that possible as well?

I have tried adding a contact named "Exposition A". I can add this contact
as participant of a meeting. And I'm able to view the expositions agenda by
selecting it from the dropdown list (in dutch "Persoon: Exposition A".
Lets say I add a company named "Exposition A". Will I be able to select the
company as participant and to view the expositions agenda by choosing it
from the pick list?

Regards,

Roland


From users@opengroupware.org  Thu Apr 15 10:06:11 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 15 Apr 2004 11:06:11 +0200
Subject: [OGo-Users] ogo booking resources without participants
In-Reply-To: <01af01c42275$d2efb7a0$0100000a@athlon>
References: <015001c42227$350a1a60$0100000a@athlon> <6EE43BCA-8E25-11D8-AE1D-000393C29C2A@opengroupware.org> <01af01c42275$d2efb7a0$0100000a@athlon>
Message-ID: <23C41F96-8EBC-11D8-AE1D-000393C29C2A@opengroupware.org>

On 15.04.2004, at 01:11, Roland Plugge wrote:
> How about setting the participant to a company?
> Is that possible as well?

No, for somewhat obvious reasons only teams and persons can be 
participants.

Greets,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr 15 11:24:18 2004
From: users@opengroupware.org (Matthias Eichler)
Date: Thu, 15 Apr 2004 12:24:18 +0200
Subject: [OGo-Users] Problems with Return-Path from OGo-Mailer
Message-ID: <1082024658.8445.3.camel@ca>

Dear List,

I've experienced problems with the "Return-Path"-Header with
mails sent from OGo-Mailer.
The problem is that we're using a non-official domain in our
LAN, so some mailserver do reject mails sent with OGo with
thr Return-Path <opengroupware@kernzeit.loc>.

I tried to fix this with:
- changing the /etc/hosts entry
- changing the reverse lookup of the ip of the server
- changing the domain and search entries in the resolv.conf
Always with restarting OGo, but no changes.

So: From where is OGo getting the information for the Return-Path
Header?!?

Thanks a lot,

Matthias
-- 
Matthias Eichler <me-lists@kernzeit.com>
kernzeit AG


From users@opengroupware.org  Thu Apr 15 12:38:32 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 15 Apr 2004 13:38:32 +0200
Subject: [OGo-Users] Problems with Return-Path from OGo-Mailer
In-Reply-To: <1082024658.8445.3.camel@ca>
References: <1082024658.8445.3.camel@ca>
Message-ID: <6CA8A446-8ED1-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 15, 2004, at 12:24 PM, Matthias Eichler wrote:
> I've experienced problems with the "Return-Path"-Header with
> mails sent from OGo-Mailer.
...
> The problem is that we're using a non-official domain in our
> LAN, so some mailserver do reject mails sent with OGo with
> thr Return-Path <opengroupware@kernzeit.loc>.
...
> So: From where is OGo getting the information for the Return-Path
> Header?!?

OGo doesn't deal with the return-path at all, this is completely 
handled by your local mail service.
=> check the configuration of your local mail system (postfix, 
sendmail, qmail, whatever)

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Thu Apr 15 14:47:56 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Thu, 15 Apr 2004 09:47:56 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
Message-ID: <407E928C.60106@gonsman.com>

I understand that you need to setup a cron job in order to make the 
appointment reminders work.  I am getting a familiar error when I try to 
run the skyaptnotify program.  Is there any documentation on how to 
setup this cron job correctly? I have tried running it as root and as 
opengroupware.  What about AptNotifySkyrixUser and 
AptNotifySkyrixPassword?  Are those supposed to be the root login that I 
use to login to the web interface or something else? I found one mailing 
list archive related to my problem, but there is no help there really 
(http://mail.opengroupware.org/pipermail/users/2003-December/007630.html).  
Here is my error:

Uncatched Objective-C exception:
Uncatched Objective-C exception:
Uncatched Objective-C exception:
.............
Segmentation fault

-Sean



From users@opengroupware.org  Thu Apr 15 15:34:54 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Thu, 15 Apr 2004 16:34:54 +0200 (CEST)
Subject: [OGo-Users] aide sur zidestore
Message-ID: <20040415143454.71411.qmail@web25110.mail.ukl.yahoo.com>

--0-922145609-1082039694=:70756
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit


hello
je suis un debutant de ogo . j'ain installé ogo et j'arrive à me connecter sur l'interface web de opengroupware mais j'ai suivi le faq et fait les modifications nécessaire concernant zidestore mais à chaque fois que je me connecte sur http://servername:23000/zidestore/so j'ai un message le message suivant dans les log d'erreur de httpd "connect to application instance failed, tried 3 times"

voici la configuration de httpd concernant zidestore

LoadModule ngobjweb_module /opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so

<LocationMatch "^/ev*>

SetHandler ngobjweb-adaptor

SetAppPort 23000

</LocationMatch>

<LocationMatch "^/zidestore/*>

SetHandler ngobjweb-adaptor

SetAppPort 23000

</LocationMatch>

#

sam sodatonou

 


		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-922145609-1082039694=:70756
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV><BR>hello<BR>je suis un debutant de ogo . j'ain installé ogo et j'arrive à me connecter sur l'interface web de opengroupware mais j'ai suivi le faq et fait les modifications nécessaire concernant zidestore mais à chaque fois que je me connecte sur <A href="http://servername:23000/zidestore/so">http://servername:23000/zidestore/so</A> j'ai un message le message suivant dans les log d'erreur de httpd "connect to application instance failed, tried 3 times"<BR><FONT size=2>
<P><FONT size=2>voici la configuration de httpd concernant zidestore</P>
<P>LoadModule ngobjweb_module /opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so</P></FONT>
<P>&lt;LocationMatch "^/ev*&gt;</P>
<P>SetHandler ngobjweb-adaptor</P>
<P>SetAppPort 23000</P>
<P>&lt;/LocationMatch&gt;</P>
<P>&lt;LocationMatch "^/zidestore/*&gt;</P>
<P>SetHandler ngobjweb-adaptor</P>
<P>SetAppPort 23000</P>
<P>&lt;/LocationMatch&gt;</P>
<P>#</P>
<P>sam sodatonou</P>
<P>&nbsp;</P></FONT></DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-922145609-1082039694=:70756--

From users@opengroupware.org  Thu Apr 15 15:38:47 2004
From: users@opengroupware.org (chris h)
Date: Thu, 15 Apr 2004 10:38:47 -0400
Subject: [OGo-Users] aide sur zidestore
In-Reply-To: <20040415143454.71411.qmail@web25110.mail.ukl.yahoo.com>
References: <20040415143454.71411.qmail@web25110.mail.ukl.yahoo.com>
Message-ID: <200404151038.47953.chris123@magma.ca>

On April 15, 2004 10:34 am, SODATONOU Dodji Samuel wrote:
> hello
> je suis un debutant de ogo . j'ain install=E9 ogo et j'arrive =E0 me conn=
ecter
> sur l'interface web de opengroupware mais j'ai suivi le faq et fait les
> modifications n=E9cessaire concernant zidestore mais =E0 chaque fois que =
je me
> connecte sur http://servername:23000/zidestore/so j'ai un message le
> message suivant dans les log d'erreur de httpd "connect to application
> instance failed, tried 3 times"
>
> voici la configuration de httpd concernant zidestore
>
> LoadModule ngobjweb_module
> /opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so
>
> <LocationMatch "^/ev*>
>
> SetHandler ngobjweb-adaptor
>
> SetAppPort 23000
>
> </LocationMatch>
>
> <LocationMatch "^/zidestore/*>
>
> SetHandler ngobjweb-adaptor
>
> SetAppPort 23000
>
> </LocationMatch>
>
> #
>
> sam sodatonou

OK..from the basic french I understand and get that you cannot connect. If=
=20
this is the problem then the URL is wrong:

 http://servername/zidestore/so/<username>

Should work

/ch

From users@opengroupware.org  Thu Apr 15 16:42:38 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 15 Apr 2004 17:42:38 +0200
Subject: [OGo-Users] aide sur zidestore
In-Reply-To: <20040415143454.71411.qmail@web25110.mail.ukl.yahoo.com>
References: <20040415143454.71411.qmail@web25110.mail.ukl.yahoo.com>
Message-ID: <85D70B36-8EF3-11D8-8F9A-000393BBAFF6@opengroupware.org>

Hi,

we have a French users list here:
   http://mail.opengroupware.org/mailman/listinfo/users-fr

This list is in English.

Thanks,
   Helge

On Apr 15, 2004, at 4:34 PM, SODATONOU Dodji Samuel wrote:
> hello
> je suis un debutant de ogo . j'ain install=E9 ogo et j'arrive =E0 me=20=

> connecter sur l'interface web de opengroupware mais j'ai suivi le faq=20=

> et fait les modifications n=E9cessaire concernant zidestore mais =E0=20=

> chaque fois que je me connecte sur=20
> http://servername:23000/zidestore/so j'ai un message le message=20
> suivant dans les log d'erreur de httpd "connect to application=20
> instance failed, tried 3 times"
--=20
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Thu Apr 15 16:49:48 2004
From: users@opengroupware.org (Daniel =?ISO-8859-1?Q?Ch=E9nard?=)
Date: Thu, 15 Apr 2004 11:49:48 -0400
Subject: [OGo-Users] Reply to
Message-ID: <1082044188.19445.59.camel@xeyrus.unigiciel.com>

I try to eliminate my "reply to:" in Ogo 
How can I do that??


À: dchenard@croesus.com
Répondre à ::
=?iso-8859-15?q?=22Daniel=20Ch=E9nard=22=20=3Cd=5Fchenard=40videotron=2Eca=3E?=@zyfer.dyndns.org
De: Daniel Ch=?iso-8859-15?q?=E9nard?= <d_chenard@videotron.ca>
Sujet: encore
-- 
Daniel Chénard
 
Croesus Finansoft Inc.
2 Place Laval, Suite 510
Laval, Quebec
Canada H7N 5N6
Site Web: www.croesus.com
 
Daniel.Chenard@croesus.com
Tel: +1 450-662-6101, 145
Fax: +1 450-662-3629
 
Please Note: The Light at the End of The Tunnel
             will be turned off until further
             notice due to budget cutbacks.
                               --The Management


From users@opengroupware.org  Thu Apr 15 18:16:00 2004
From: users@opengroupware.org (chris h)
Date: Thu, 15 Apr 2004 13:16:00 -0400
Subject: [OGo-Users] New Feature
Message-ID: <200404151316.00161.chris123@magma.ca>

English version, german follows:

In response to a request on the german list, I have set up a new feature on 
the docs site. You will see a new tab called "published docs" which will 
provide users quick access to all documentation that is currently in the 
"published state" Documents that are not in this state will not appear in 
this inventory. 

If you have documentation that has been contributed to docs, please go back 
and tag the documents for "publication" This feature is available from the 
state tab in your account. 

questions, bugs or help requests to the documentation list pls.

Hope it helps.

/ch


From users@opengroupware.org  Thu Apr 15 21:59:04 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Thu, 15 Apr 2004 22:59:04 +0200 (CEST)
Subject: [OGo-Users] help to start zidestore
Message-ID: <20040415205904.10118.qmail@web25110.mail.ukl.yahoo.com>

--0-2039215068-1082062744=:9625
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

i install ogo and i can connect to http://servername:20000/OpenGroupware but i tried all the faqs instructions to load zidestore but when i make a connection to http://servername/zidestore/so/username i have an error message, that is the error of httpd error log "connect to application instance failed, tried 3 times"
please that is the configuration of zidestore
LoadModule ngobjweb_module /opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so

<LocationMatch "^/ev*>

SetHandler ngobjweb-adaptor

SetAppPort 23000

</LocationMatch>

<LocationMatch "^/zidestore/*>

SetHandler ngobjweb-adaptor

SetAppPort 23000

</LocationMatch>



		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-2039215068-1082062744=:9625
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>
<DIV>i install ogo and i can connect to <A href="http://servername:20000/OpenGroupware" target=_blank>http://servername:20000/OpenGroupware</A> but i tried all the faqs instructions to load zidestore but when i make a connection to <A href="http://servername/zidestore/so/username" target=_blank>http://servername/zidestore/so/username</A> i have an error message, that is the error of httpd error log "connect to application instance failed, tried 3 times"</DIV>
<DIV>please that is the configuration of zidestore<BR>LoadModule ngobjweb_module /opt/opengroupware.org/WebServer/ngobjweb_2.0.40.so</DIV>
<DIV>
<P>&lt;LocationMatch "^/ev*&gt;</P>
<P>SetHandler ngobjweb-adaptor</P>
<P>SetAppPort 23000</P>
<P>&lt;/LocationMatch&gt;</P>
<P>&lt;LocationMatch "^/<B style="COLOR: black; BACKGROUND-COLOR: #ffff66">zidestore</B>/*&gt;</P>
<P>SetHandler ngobjweb-adaptor</P>
<P>SetAppPort 23000</P>
<P>&lt;/LocationMatch&gt;</P></DIV></DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-2039215068-1082062744=:9625--

From users@opengroupware.org  Thu Apr 15 22:49:54 2004
From: users@opengroupware.org (chris h)
Date: Thu, 15 Apr 2004 17:49:54 -0400
Subject: [OGo-Users] help to start zidestore
In-Reply-To: <20040415205904.10118.qmail@web25110.mail.ukl.yahoo.com>
References: <20040415205904.10118.qmail@web25110.mail.ukl.yahoo.com>
Message-ID: <200404151749.54563.chris123@magma.ca>

On April 15, 2004 04:59 pm, SODATONOU Dodji Samuel wrote:
> i install ogo and i can connect to http://servername:20000/OpenGroupware

If apache is setup correctly and the module compiled without errors then the 
correct URL should be

http://servername/OpenGroupware

> but i tried all the faqs instructions to load zidestore but when i make a
> connection to http://servername/zidestore/so/username i have an error
> message, that is the error of httpd error log "connect to application
> instance failed, tried 3 times" 

did you start the zidestore server with your init script or manually?

A quick overview of applicable scripts can be found here;

http://docs.opengroupware.org/Members/chris/scripts/

/ch

From users@opengroupware.org  Fri Apr 16 16:50:35 2004
From: users@opengroupware.org (Michael Jirsch)
Date: Fri, 16 Apr 2004 17:50:35 +0200
Subject: [OGo-Users] Database structure Documentation?
Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAFJIfdCJ3LEGpKR/ZfFfJZQEAAAAA@first-private.de>

This is a multi-part message in MIME format.

--Boundary_(ID_QeVfKVeoggltfMhHd1a/sg)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT

Hello,
 
is there any documentation about the structure of the underlying
SQL-database? 
We would like to query Ogo-data from within other applications, is that
possible?
 
best regards,
 Michael Jirsch

--Boundary_(ID_QeVfKVeoggltfMhHd1a/sg)
Content-type: text/html; charset=us-ascii
Content-transfer-encoding: 7BIT

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<TITLE>Nachricht</TITLE>

<META content="MSHTML 6.00.3790.94" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT face=Arial size=2><SPAN 
class=255143515-16042004>Hello,</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN 
class=255143515-16042004></SPAN></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial size=2><SPAN class=255143515-16042004>is there any 
documentation about the structure of the underlying SQL-database? 
</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=255143515-16042004>We would like to 
query Ogo-data from within other applications, is that 
possible?</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN 
class=255143515-16042004></SPAN></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial size=2><SPAN class=255143515-16042004>best 
regards,</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=255143515-16042004>&nbsp;Michael 
Jirsch</SPAN></FONT></DIV></BODY></HTML>

--Boundary_(ID_QeVfKVeoggltfMhHd1a/sg)--

From users@opengroupware.org  Fri Apr 16 17:24:55 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 16 Apr 2004 18:24:55 +0200
Subject: [OGo-Users] Database structure Documentation?
In-Reply-To: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAFJIfdCJ3LEGpKR/ZfFfJZQEAAAAA@first-private.de>
References: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAFr+Vr2IsSEamvB1NyyHSiMKAAAAQAAAAFJIfdCJ3LEGpKR/ZfFfJZQEAAAAA@first-private.de>
Message-ID: <98738AEC-8FC2-11D8-AE1D-000393C29C2A@opengroupware.org>

On 16.04.2004, at 17:50, Michael Jirsch wrote:
> is there any documentation about the structure of the underlying 
> SQL-database?

http://www.opengroupware.org/en/devs/resources/db/

> We would like to query Ogo-data from within other applications, is 
> that possible?

This is discouraged, if possible, use the XML-RPC API or ZideStore 
instead.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Fri Apr 16 20:29:09 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Fri, 16 Apr 2004 15:29:09 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <407E928C.60106@gonsman.com>
References: <407E928C.60106@gonsman.com>
Message-ID: <40803405.6050805@gonsman.com>

I tried the thing below, but in the back trace I get about 4,000 lines.  
And I guess that wouldn't be good for a mailing list :)  Any other ideas 
or hints that I can try to get the reminders to work.  I have tried 
searching the NET but I really can't find anything.

-Sean

--This is from an earlier post:

> Well, you could start skyaptnotify in GDB. If it starts printing the 
> lines, press Ctrl-C and use the GDB "backtrace" command to check out 
> the function callstack.
> Attach that to the bugreport.
>
> regards,
>   Helge
>
>


From users@opengroupware.org  Sun Apr 18 22:26:58 2004
From: users@opengroupware.org (Laurence Southon)
Date: Sun, 18 Apr 2004 22:26:58 +0100
Subject: [OGo-Users] Localise holidays
Message-ID: <CDENKEKJOLCCALOOIHOFMEOHDIAA.ogousers@southon.uk.net>

I'm not at all sure what I should be doing to localise Public Holidays to my
UK location, and remove (fascinating as they are!) references to German
holidays. I have a Debian install.

Should I edit:

/usr/lib/opengroupware.org/Libraries/Resources/OGoScheduler/Holidays.plist?

There is a document at docs.opengroupware.org which says I should overwrite
using NSGlobalDomain.plist. But I find 3 instances of NSGlobalDomain.plist
in my install. Which one should it be?

On a more general note, I have done some customisation to UK English, eg
Zip -> PostCode, Vacation -> Holiday. Should I just patch the files I've
edited, or is there a way of having a UK_English.lproj?

Any help gratefully received. Running live now with 8 users!

Regards,

Laurence Southon
London, UK



From users@opengroupware.org  Mon Apr 19 09:22:39 2004
From: users@opengroupware.org (Marco Marongiu)
Date: Mon, 19 Apr 2004 10:22:39 +0200
Subject: [OGo-Users] About bug 108 (Skyaptnotify logs to /opt/skyrix/skyrix41/logs/sent-resources
 by default on Debian)
Message-ID: <40838C4F.70905@tiscali.com>

Hello there!

I am trying to set up aptnotify on debian and I hit this bug. I also 
tried to set up the Default AptNotifySentResources, but the behaviour 
didn't change.

Is there a clean solution or I should work around the problem creating a 
symbolic link

/opt/skyrix/skyrix41/logs -> /var/log/opengroupware.org

Ciao and thanks!
--Marco

PS: For reference, you can find this bug's history at 
http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=108

From users@opengroupware.org  Mon Apr 19 11:14:19 2004
From: users@opengroupware.org (Helge Hess)
Date: Mon, 19 Apr 2004 12:14:19 +0200
Subject: [OGo-Users] About bug 108 (Skyaptnotify logs to /opt/skyrix/skyrix41/logs/sent-resources by default on Debian)
In-Reply-To: <40838C4F.70905@tiscali.com>
References: <40838C4F.70905@tiscali.com>
Message-ID: <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 19, 2004, at 10:22 AM, Marco Marongiu wrote:
> I am trying to set up aptnotify on debian and I hit this bug. I also 
> tried to set up the Default AptNotifySentResources, but the behaviour 
> didn't change.

The default is called "AptNotifySentResourcesFile".

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Mon Apr 19 20:08:31 2004
From: users@opengroupware.org (J.S. Jorritsma)
Date: Mon, 19 Apr 2004 21:08:31 +0200
Subject: [OGo-Users] Thanks!
In-Reply-To: <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <40838C4F.70905@tiscali.com> <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <408423AF.6070607@aboveit.nl>

Hi Helge,

Thanks for placing a comment on the site!

Let's start!

Greetings,

Jorrit


From users@opengroupware.org  Tue Apr 20 00:00:10 2004
From: users@opengroupware.org (Guillaume MEISTER)
Date: Tue, 20 Apr 2004 01:00:10 +0200
Subject: [OGo-Users] Guillaume MEISTER est absent.
Message-ID: <OF8EE6C0E6.3BAE856A-ONC1256E7B.007E5BB0-C1256E7B.007E5BB0@sfig.fr>

I will be out of the office starting  19/04/2004 and will not return un=
til
26/04/2004.

Je vous r=E9pondrai =E0 mon retour (01/03/2004).

Cordialement
=



From users@opengroupware.org  Tue Apr 20 09:39:14 2004
From: users@opengroupware.org (=?iso-8859-1?q?SODATONOU=20Dodji=20Samuel?=)
Date: Tue, 20 Apr 2004 10:39:14 +0200 (CEST)
Subject: [OGo-Users] help to setup 30 hosts on my opengroupware sys V init script
Message-ID: <20040420083914.29682.qmail@web25104.mail.ukl.yahoo.com>

--0-1633995843-1082450354=:29434
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

hello
 i install and start zidestore and opengroupware but i am thinking to setup all host of my network 62.56.186.160/27. i want to ask if i can add this manually or someone have a proposition to tell me to resolve this problem
 
any help will be appreciated
 
sam sodatonou

		
---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
--0-1633995843-1082450354=:29434
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

<DIV>hello</DIV>
<DIV>&nbsp;i install and start zidestore and opengroupware but i am thinking to setup all host of my network 62.56.186.160/27. i want to ask if i can add this manually or someone have a proposition to tell me to resolve this problem</DIV>
<DIV>&nbsp;</DIV>
<DIV>any help will be appreciated</DIV>
<DIV>&nbsp;</DIV>
<DIV>sam sodatonou</DIV><p>
		<hr size=1>
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
<br><a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/mail/mail_taglines/default/*http://fr.benefits.yahoo.com/">Créez votre Yahoo! Mail</a>
<br><br>
Dialoguez en direct avec vos amis grâce à <a href="http://fr.rd.yahoo.com/mail/taglines/*http://fr.rd.yahoo.com/messenger/mail_taglines/default/*http://fr.messenger.yahoo.com/">Yahoo! Messenger !</a>
--0-1633995843-1082450354=:29434--

From users@opengroupware.org  Tue Apr 20 09:59:46 2004
From: users@opengroupware.org (Marco Marongiu)
Date: Tue, 20 Apr 2004 10:59:46 +0200
Subject: [OGo-Users] About bug 108 (Skyaptnotify logs to /opt/skyrix/skyrix41/logs/sent-resources
 by default on Debian)
In-Reply-To: <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <40838C4F.70905@tiscali.com> <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <4084E682.4040007@tiscali.com>


Helge Hess wrote:
> On Apr 19, 2004, at 10:22 AM, Marco Marongiu wrote:
> 
>> I am trying to set up aptnotify on debian and I hit this bug. I also 
>> tried to set up the Default AptNotifySentResources, but the behaviour 
>> didn't change.
> 
> 
> The default is called "AptNotifySentResourcesFile".

That works, thank you!!!

Ciao
--Marco

From users@opengroupware.org  Tue Apr 20 10:04:41 2004
From: users@opengroupware.org (Andrej Tazberik)
Date: Tue, 20 Apr 2004 11:04:41 +0200
Subject: [OGo-Users] Solaris 9 build problem
Message-ID: <4084E7A9.7000308@somi.sk>

	Hi all,

I'm trying to build opengroupware on Solaris 9/SPARC platform. Building 
goes quite fine UNTIL OGo Business Logic.  According to on-line manual I 
did following:

bash-2.05$ cd Logic
bash-2.05$ make -s debug=yes install
.
.
.
gmake[1]: Leaving directory 
`/export/home/andrej/install/opengroupware/Logic/LSScheduler'
bash-2.05$ cd ..
bash-2.05$ Defaults write NSGlobalDomain NGBundlePath
Apr 20 09:49:29 Defaults [13673]: The domain's value should be a 
dictionary object! (got 'NGBundlePath')


Instead of that I should (according to online manual) get output like this:

bash-2.05$ Defaults write NSGlobalDomain NGBundlePath 
"$GNUSTEP_USER_ROOT/Library/OpenGroupware.org"

Do you think you could help me to solve this problem?

	thanx,		Andrej

From users@opengroupware.org  Tue Apr 20 11:34:37 2004
From: users@opengroupware.org (Andrej Tazberik)
Date: Tue, 20 Apr 2004 12:34:37 +0200
Subject: [OGo-Users] Solaris 9 build problem
In-Reply-To: <4084E7A9.7000308@somi.sk>
References: <4084E7A9.7000308@somi.sk>
Message-ID: <4084FCBD.80503@somi.sk>

Andrej Tazberik wrote:
>     Hi all,
> 
> I'm trying to build opengroupware on Solaris 9/SPARC platform. Building 
> goes quite fine UNTIL OGo Business Logic.  According to on-line manual I 
> did following:
> 
> bash-2.05$ cd Logic
> bash-2.05$ make -s debug=yes install
> .
> .
> .
> gmake[1]: Leaving directory 
> `/export/home/andrej/install/opengroupware/Logic/LSScheduler'
> bash-2.05$ cd ..
> bash-2.05$ Defaults write NSGlobalDomain NGBundlePath
> Apr 20 09:49:29 Defaults [13673]: The domain's value should be a 
> dictionary object! (got 'NGBundlePath')
> 
> 
> Instead of that I should (according to online manual) get output like this:
> 
> bash-2.05$ Defaults write NSGlobalDomain NGBundlePath 
> "$GNUSTEP_USER_ROOT/Library/OpenGroupware.org"
> 
> Do you think you could help me to solve this problem?
> 
>     thanx,        Andrej

PLEASE    I.G.N.O.R.E    my previous email!

There is written at groupware.org web site:

Defaults write NSGlobalDomain NGBundlePath 
"$GNUSTEP_USER_ROOT/Library/OpenGroupware.org"

in just one single line!

But because of small window-size of my mozilla browser I saw it in 2 
lines and I typed just:

bash-2.05$ Defaults write NSGlobalDomain NGBundlePath

and expected "$GNUSTEP_USER_ROOT/Library/OpenGroupware.org" as a outut 
from that command.  Sorry! ;-)

	Andrej


From users@opengroupware.org  Tue Apr 20 12:34:28 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Tue, 20 Apr 2004 08:34:28 -0300
Subject: [OGo-Users] Re: Localise holidays
In-Reply-To: <CDENKEKJOLCCALOOIHOFMEOHDIAA.ogousers@southon.uk.net>
References: <CDENKEKJOLCCALOOIHOFMEOHDIAA.ogousers@southon.uk.net>
Message-ID: <c631s5$e5p$1@sea.gmane.org>

Laurence Southon wrote:
> I'm not at all sure what I should be doing to localise Public Holidays to my
> UK location, and remove (fascinating as they are!) references to German
> holidays. I have a Debian install.

Me neither!

> 
> Should I edit:
> 
> /usr/lib/opengroupware.org/Libraries/Resources/OGoScheduler/Holidays.plist?
> 
> There is a document at docs.opengroupware.org which says I should overwrite
> using NSGlobalDomain.plist. 

spent week hacking this doc and still not there... as usual, I am 
missing the obvious... Gave up for a while. Fresh synapses on urgent need.

But I find 3 instances of NSGlobalDomain.plist
> in my install. Which one should it be?
> 
If this is to be set by the Defaults command, then it will act on the file

~/.libFoundation/Defaults/NSGlobalDomain.plist

(note the hidden directory)

> On a more general note, I have done some customisation to UK English, eg
> Zip -> PostCode, Vacation -> Holiday. Should I just patch the files I've
> edited, or is there a way of having a UK_English.lproj?
> 
You may submit a bug to OGo bugzilla with your contribution, for later 
enhancement/inclusion of/into OGo.

Actually, UK_English.lproj can be quite small since any missing 
reference into your   ~/Resource/UK_English.lproj/<>.string file will be 
filled by the corresponding English.lproj string file..., in other 
words, work on the differences only.

> Any help gratefully received. Running live now with 8 users!
> 
> Regards,
> 
> Laurence Southon
> London, UK
> 
> 


From users@opengroupware.org  Tue Apr 20 15:02:34 2004
From: users@opengroupware.org (Luca)
Date: Tue, 20 Apr 2004 16:02:34 +0200
Subject: [OGo-Users] RFC 822 & Spam
Message-ID: <40852D7A.2030106@ianus.ws>

Hello,

I had a look to this bug:

http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=607

I'm experiencing same issue with ordinary mails too: are often tagged as 
spam. Someone suggested me that OGo headers are breaking RFC 822, since 
Content-Type field is BEFORE To and From fields. It looks like this can 
rise spam-tagging likelihood. If this is considered a concrete issue, 
I'll open a bug for normal mails too.

Hope this helps.

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Tue Apr 20 17:21:56 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 20 Apr 2004 18:21:56 +0200
Subject: [OGo-Users] RFC 822 & Spam
In-Reply-To: <40852D7A.2030106@ianus.ws>
References: <40852D7A.2030106@ianus.ws>
Message-ID: <D7C9E75C-92E6-11D8-AE1D-000393C29C2A@opengroupware.org>

On 20.04.2004, at 16:02, Luca wrote:
> Someone suggested me that OGo headers are breaking RFC 822, since 
> Content-Type field is BEFORE To and From fields. It looks like this 
> can rise spam-tagging likelihood.

Hm, interesting. If OGo does generate content-type before to/from and 
if you can locate the section in RFC 822 (I think is actually 
deprecated, there is a new one) which forbids that, please create a 
bugreport.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Tue Apr 20 18:15:57 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 20 Apr 2004 19:15:57 +0200
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <407E928C.60106@gonsman.com>
References: <407E928C.60106@gonsman.com>
Message-ID: <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>

On 15.04.2004, at 15:47, Sean Gonsman wrote:
> I understand that you need to setup a cron job in order to make the 
> appointment reminders work.

Correct.

> Is there any documentation on how to setup this cron job correctly?

Hm, need to ask Chris whether this is in the SKYRiX 4.1 manuals. This 
page contains some more defaults on skyaptnotify:
   http://docs.opengroupware.org/Members/helge/ports/iSeries/view

Maybe you could try to set the AptNotifyBeVerbose to YES for more log 
output.

> I have tried running it as root and as opengroupware.

Run it as opengroupware.

> What about AptNotifySkyrixUser and AptNotifySkyrixPassword?  Are those 
> supposed to be the root login that I use to login to the web interface 
> or something else?

Exactly. Root login and root password.

> Here is my error:
>
> Uncatched Objective-C exception:
...

Please ensure that OpenGroupware.org.sh is properly sourced prior 
starting skyaptnotify (eg by wrapping skyaptnotify in a shell script).

[GDB]
> I tried the thing below, but in the back trace I get about 4,000 
> lines.  And I guess that wouldn't be good for a mailing list :)

Well, then please just send the top 30 and the bottom 30 lines.

Thanks a lot,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Tue Apr 20 18:22:30 2004
From: users@opengroupware.org (chris h)
Date: Tue, 20 Apr 2004 13:22:30 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <200404201322.30161.chris123@magma.ca>

On April 20, 2004 01:15 pm, Helge Hess wrote:

> Hm, need to ask Chris whether this is in the SKYRiX 4.1 manuals. This
> page contains some more defaults on skyaptnotify:
>    http://docs.opengroupware.org/Members/helge/ports/iSeries/view

Yes there are details there. Will post tonight as currently too busy. Will 
post to docs, with reference in this thread.

/ch

From users@opengroupware.org  Tue Apr 20 18:25:37 2004
From: users@opengroupware.org (Luca)
Date: Tue, 20 Apr 2004 19:25:37 +0200
Subject: [OGo-Users] RFC 822 & Spam
In-Reply-To: <D7C9E75C-92E6-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <40852D7A.2030106@ianus.ws> <D7C9E75C-92E6-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <40855D11.1080807@ianus.ws>

Helge Hess wrote:

> Hm, interesting. If OGo does generate content-type before to/from and 
> if you can locate the section in RFC 822 (I think is actually 
> deprecated, there is a new one) which forbids that, please create a 
> bugreport. 

Yes, you are right.

RFC2822 obsoletes RFC822.

Anyway rfc 2822 http://www.faqs.org/rfcs/rfc2822.html explicity says:

>It is important to note that the header fields are not guaranteed to
>   be in a particular order.  They may appear in any order, and they
>   have been known to be reordered occasionally when transported over
>   the Internet.  However, for the purposes of this standard, header
>   fields SHOULD NOT be reordered when a message is transported or
>   transformed.  More importantly, the trace header fields and resent
>   header fields MUST NOT be reordered, and SHOULD be kept in blocks
>   prepended to the message.  See sections 3.6.6 and 3.6.7 for more
>   information.
>
>   The only required header fields are the origination date field and
>   the originator address field(s).  All other header fields are
>   syntactically optional.
>

Anyway rfc 822 http://www.faqs.org/rfcs/rfc822.html claims:

>4.1.  SYNTAX
>
>     Note:  Due to an artifact of the notational conventions, the syn-
>            tax  indicates that, when present, some fields, must be in
>            a particular order.  Header fields  are  NOT  required  to
>            occur  in  any  particular  order, except that the message
>            body must occur AFTER  the  headers.   It  is  recommended
>            that,  if  present,  headers be sent in the order "Return-
>            Path", "Received", "Date",  "From",  "Subject",  "Sender",
>            "To", "cc", etc.
>
And this was explicity contradicted by the new one. Anyway, it's 
possible spam-detecting systems follow quite strictly some obscure rule 
about headers order. Tomorrow we'll do some testing trying header 
inversion. If this generates big differences in spam likelihood, I'll 
open the bug.

Regards, Luca.



=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Tue Apr 20 19:32:38 2004
From: users@opengroupware.org (chris h)
Date: Tue, 20 Apr 2004 14:32:38 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <200404201322.30161.chris123@magma.ca>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org> <200404201322.30161.chris123@magma.ca>
Message-ID: <200404201432.38681.chris123@magma.ca>

On April 20, 2004 01:22 pm, chris h wrote:

=46rom the 4.1 Admin Manual;

5.2.	Configuration of aptnotify.py=20

To enable the SKYRiX scheduler to mail notifications of appointments a vali=
d=20
configuration of the file aptnotify.py is necessary. You will find this fil=
e=20
in /opt/skyrix/skyrix41/Tools.=20

=46ollowing variables may be changed:=20

beVerbose	=3D0=20
skyrixuser	=3D=E2=80=99root=E2=80=99=20
skyrixpwd	=3D=E2=80=99<SKYRiX root password>=E2=80=99=20
fromadress	=3D=E2=80=99<valid E-mail-address>=E2=80=99=20
smtphost	=3D=E2=80=99<valid smtp-host>=E2=80=99=20
sentResourcesFile =3D=E2=80=99/opt/skyrix/skyrix41/logs/sent-resources=E2=
=80=99=20
checkprefix	=3D 600#minutes=20
deftimezone	=3D=E2=80=99MET=E2=80=99=20
calFmt	=3D=E2=80=99%Y-%m-%d %H:%M (%Z)=E2=80=99

5.3.	Configuration of crontab=20

During installation of SKYRiX an entry is added in crontab. It enables the=
=20
execution of a script named aptnotify which sends notification mails. The=20
default is:=20

*/10****/bin/bash /opt/skyrix/skyrix41/Tools/aptnotify.sh \=20
>>/opt/skyrix/skyrix41/logs/aptnotify.log 2>&1=20

which invokes every 10 minutes the aptnotify-shell script.If you have probl=
ems=20
getting appoint	ment notification mails, please verify that this parameter =
is=20
correctly set. If not so add this entry.

Thats about it.

regards

/ch

From users@opengroupware.org  Tue Apr 20 20:28:50 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 20 Apr 2004 15:28:50 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <200404201432.38681.chris123@magma.ca>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org> <200404201322.30161.chris123@magma.ca> <200404201432.38681.chris123@magma.ca>
Message-ID: <408579F2.5000905@gonsman.com>

>On April 20, 2004 01:22 pm, chris h wrote:
>
>From the 4.1 Admin Manual;
>
>5.2.	Configuration of aptnotify.py 
>
>To enable the SKYRiX scheduler to mail notifications of appointments a valid 
>configuration of the file aptnotify.py is necessary. You will find this file 
>in /opt/skyrix/skyrix41/Tools. 
>
There is no directory "/opt/skyrix/skyrix41" so I can't do this.  I did, 
however, find a file located here: 
/opt/opengroupware.org/.libFoundation/Defaults/skyaptnotify.plist   but 
it looks very different.

>5.3.	Configuration of crontab 
>
>During installation of SKYRiX an entry is added in crontab. It enables the 
>execution of a script named aptnotify which sends notification mails. The 
>default is: 
>
No cron tab was setup during installation.  I set my own, but it doesn't 
work.  Maybe because I don't have the file aptnotify.py.  It seems that 
the perl script install is very different than maually installing the 
rpms.  I wish there was a complete install guide which covered 
everything on one page.  Is this possible?

-Sean


From users@opengroupware.org  Tue Apr 20 20:44:11 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 20 Apr 2004 15:44:11 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <40857D8B.5020305@gonsman.com>

> Hm, need to ask Chris whether this is in the SKYRiX 4.1 manuals. This 
> page contains some more defaults on skyaptnotify:
>   http://docs.opengroupware.org/Members/helge/ports/iSeries/view 

I looked over these docs, but I don't know what to do with them.  Should 
I run the commands from a shell promt in the section "aptnotify Defaults"?

> Maybe you could try to set the AptNotifyBeVerbose to YES for more log 
> output. 

There is no log output.  Is it supposed to log to a file other than 
"/var/log/ogo.log"?

> Please ensure that OpenGroupware.org.sh is properly sourced prior 
> starting skyaptnotify (eg by wrapping skyaptnotify in a shell script). 

I am kinda new to Linux, what does this mean?

> [GDB]
>
>> I tried the thing below, but in the back trace I get about 4,000 
>> lines.  And I guess that wouldn't be good for a mailing list :)
>
>
> Well, then please just send the top 30 and the bottom 30 lines. 

#0  0x401fb07b in Avsprintf (format=0x402e0fa4, args=0xbfeed28c "\004") 
at common.m:366
#1  0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x824832c, _cmd=0x402e7dd0, format=0x402e0fa4,
    argList=0xbfeed28c "\004") at NSString.m:2255
#2  0x402329bc in +[NSString(NSStringCreation) stringWithFormat:] 
(self=0x402e7ba0, _cmd=0x402e0db0, format=0x402e0fa4)
    at NSString.m:1458
#3  0x402146b8 in -[NSDictionary descriptionWithLocale:indent:] 
(self=0x8248394, _cmd=0x402e0da0, locale=0x0, indent=0)
    at NSDictionary.m:467
#4  0x402152c4 in -[NSDictionary description] (self=0x8248394, 
_cmd=0x402ddbd0) at NSDictionary.m:576
#5  0x40201685 in -[NSException(Extensions) errorString] 
(self=0x8248344, _cmd=0x402ddaf0) at NSException.m:293
#6  0x40200aca in _default_exception_handler (exception=0x8248344) at 
NSException.m:67
#7  0x4020124d in -[NSException raise] (self=0x8248344, _cmd=0x402eba70) 
at NSException.m:226
#8  0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
    fileName=0x402ebbac) at NSCharacterSet.m:85
#9  0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#10 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x8247a7c, _cmd=0x402f5460, format=0x402e0fa4,
    context=0xbfeed90c) at FormatScanner.m:157
#11 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x8247a7c, _cmd=0x402dc460,
    format=0x402e0fa4, args=0xbfeed9dc "\004") at PrintfFormatScanner.m:43
#12 0x401fb0f8 in Avsprintf (format=0x402e0fa4, args=0xbfeed9dc "\004") 
at common.m:369
#13 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x82479fc, _cmd=0x402e7dd0, format=0x402e0fa4,
    argList=0xbfeed9dc "\004") at NSString.m:2255
#14 0x402329bc in +[NSString(NSStringCreation) stringWithFormat:] 
(self=0x402e7ba0, _cmd=0x402e0db0, format=0x402e0fa4)
    at NSString.m:1458
#15 0x402146b8 in -[NSDictionary descriptionWithLocale:indent:] 
(self=0x8247a64, _cmd=0x402e0da0, locale=0x0, indent=0)
    at NSDictionary.m:467
#16 0x402152c4 in -[NSDictionary description] (self=0x8247a64, 
_cmd=0x402ddbd0) at NSDictionary.m:576
#17 0x40201685 in -[NSException(Extensions) errorString] 
(self=0x8247a14, _cmd=0x402ddaf0) at NSException.m:293
#18 0x40200aca in _default_exception_handler (exception=0x8247a14) at 
NSException.m:67
#19 0x4020124d in -[NSException raise] (self=0x8247a14, _cmd=0x402eba70) 
at NSException.m:226
#20 0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
#21 0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#22 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x824714c, _cmd=0x402f5460, format=0x402e0fa4,
    context=0xbfeee05c) at FormatScanner.m:157
#23 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x824714c, _cmd=0x402dc460,
    format=0x402e0fa4, args=0xbfeee12c "\004") at PrintfFormatScanner.m:43
#24 0x401fb0f8 in Avsprintf (format=0x402e0fa4, args=0xbfeee12c "\004") 
at common.m:369
#25 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x82470cc, _cmd=0x402e7dd0, format=0x402e0fa4,
    argList=0xbfeee12c "\004") at NSString.m:2255
#26 0x402329bc in +[NSString(NSStringCreation) stringWithFormat:] 
(self=0x402e7ba0, _cmd=0x402e0db0, format=0x402e0fa4)
    at NSString.m:1458
#27 0x402146b8 in -[NSDictionary descriptionWithLocale:indent:] 
(self=0x8247134, _cmd=0x402e0da0, locale=0x0, indent=0)
    at NSDictionary.m:467
#28 0x402152c4 in -[NSDictionary description] (self=0x8247134, 
_cmd=0x402ddbd0) at NSDictionary.m:576
#29 0x40201685 in -[NSException(Extensions) errorString] 
(self=0x82470e4, _cmd=0x402ddaf0) at NSException.m:293


#7159 0x4020124d in -[NSException raise] (self=0x80eec8c, 
_cmd=0x402eba70) at NSException.m:226
#7160 0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
---Type <return> to continue, or q <return> to quit---
    fileName=0x402ebbac) at NSCharacterSet.m:85
#7161 0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#7162 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x80edd1c, _cmd=0x402f5460, format=0x8054244,
    context=0xbfffdf4c) at FormatScanner.m:157
#7163 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x80edd1c, _cmd=0x402dc460,
    format=0x8054244, args=0xbfffe024 "lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") 
at PrintfFormatScanner.m:43
#7164 0x401fb0f8 in Avsprintf (format=0x8054244, args=0xbfffe024 
"lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") at common.m:369
#7165 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x80ec7c4, _cmd=0x402de218, format=0x8054244,
    argList=0xbfffe024 "lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") at NSString.m:2255

#7166 0x40203644 in NSLogv (format=0x8054244, args=0xbfffe024 
"lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") at NSUtilities.m:71
#7167 0x40203513 in NSLog (format=0x8054244) at NSUtilities.m:55
#7168 0x0804b93b in _start ()
#7169 0x0804ba0d in _start ()
#7170 0x4020124d in -[NSException raise] (self=0x80eca6c, 
_cmd=0x402eba70) at NSException.m:226
#7171 0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
    fileName=0x402ebbac) at NSCharacterSet.m:85
#7172 0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#7173 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x80e6c44, _cmd=0x402f5460, format=0x404cf164,
    context=0xbfffe1bc) at FormatScanner.m:157
#7174 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x80e6c44, _cmd=0x402dc460,
    format=0x404cf164, args=0xbfffe294 "t3\n@@ñL@àðL@ç~1@\030'/@") at 
PrintfFormatScanner.m:43
#7175 0x401fb0f8 in Avsprintf (format=0x404cf164, args=0xbfffe294 
"t3\n@@ñL@àðL@ç~1@\030'/@") at common.m:369
#7176 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x80c9984, _cmd=0x402de218, format=0x404cf164,
    argList=0xbfffe294 "t3\n@@ñL@àðL@ç~1@\030'/@") at NSString.m:2255
#7177 0x40203644 in NSLogv (format=0x404cf164, args=0xbfffe294 
"t3\n@@ñL@àðL@ç~1@\030'/@") at NSUtilities.m:71
#7178 0x40203513 in NSLog (format=0x404cf164) at NSUtilities.m:55

#7179 0x40472f20 in +[EOAdaptor adaptorWithName:] (self=0x404cede0, 
_cmd=0x400a3c38, adaptorName=0x400a3374)
    at EOAdaptor.m:132
#7180 0x4006a63c in LSCommandRunV ()
   from 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil/libLSFoundation_d.so.5.0
---Type <return> to continue, or q <return> to quit---
#7181 0x4006aa8e in LSCommandRunV ()
   from 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil/libLSFoundation_d.so.5.0
#7182 0x40069a84 in LSCommandRunV ()
   from 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil/libLSFoundation_d.so.5.0
#7183 0x0804bbeb in _start ()
#7184 0x0804a281 in _start ()
#7185 0x0804b85f in _start ()
#7186 0x0804bb3a in _start ()
#7187 0x080509d0 in main ()
#7188 0x42015574 in __libc_start_main () from /lib/tls/libc.so.6

-Sean


From users@opengroupware.org  Tue Apr 20 22:09:06 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 20 Apr 2004 23:09:06 +0200
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <40857D8B.5020305@gonsman.com>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org> <40857D8B.5020305@gonsman.com>
Message-ID: <F55A977F-930E-11D8-AE1D-000393C29C2A@opengroupware.org>

On 20.04.2004, at 21:44, Sean Gonsman wrote:
> I looked over these docs, but I don't know what to do with them.  
> Should I run the commands from a shell promt in the section "aptnotify 
> Defaults"?

To set defaults, login as opengroupware and run the Defaults command. 
Like:
---snip---
su - opengroupware
Defaults write skyaptnotify AptNotifyBeVerbose YES
---snap---

>> Please ensure that OpenGroupware.org.sh is properly sourced prior 
>> starting skyaptnotify (eg by wrapping skyaptnotify in a shell 
>> script).
> I am kinda new to Linux, what does this mean?

The program needs a proper environment to run. This environment is set 
up by the OpenGroupware.org.sh shell scripts which lives in 
~opengroupware.
If you login as user "opengroupware", this shell script is 
automatically "sourced", but not if you run from cron.
The usual workaround is to create a small shell script which wraps the 
real program, like:
---snip---
#!/bin/sh

. ~opengroupware/OpenGroupware.org.sh
$GNUSTEP_USER_ROOT/Tools/ix86/linux-gnu/gnu-fd-nil/skyaptnotify
---snap---
The "." sources the file.

>> Well, then please just send the top 30 and the bottom 30 lines.
> #0  0x401fb07b in Avsprintf (format=0x402e0fa4, args=0xbfeed28c 
> "\004") at common.m:366
...
> #8  0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
> (self=0x402eb980, _cmd=0x402eba90,

Yes, this is due to OpenGroupware.org.sh not being sourced. I have 
improved the behaviour of libFoundation to avoid the endless cycle in 
this edge case in CVS head.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Tue Apr 20 22:11:09 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 20 Apr 2004 23:11:09 +0200
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <408579F2.5000905@gonsman.com>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org> <200404201322.30161.chris123@magma.ca> <200404201432.38681.chris123@magma.ca> <408579F2.5000905@gonsman.com>
Message-ID: <3EDECC6E-930F-11D8-AE1D-000393C29C2A@opengroupware.org>

On 20.04.2004, at 21:28, Sean Gonsman wrote:
>> 5.2.	Configuration of aptnotify.py
>> To enable the SKYRiX scheduler to mail notifications of appointments 
>> a valid configuration of the file aptnotify.py is necessary. You will 
>> find this file in /opt/skyrix/skyrix41/Tools.
> There is no directory "/opt/skyrix/skyrix41" so I can't do this.  I 
> did, however, find a file located here: 
> /opt/opengroupware.org/.libFoundation/Defaults/skyaptnotify.plist   
> but it looks very different.

Hm, yes. The instructions are for skyaptnotify.py which was replaced by 
skyaptnotify. It was a Python tool before and now is a regular 
Objective-C program.
So the SKYRiX 4.1 instructions on this are deprecated.

>> 5.3.	Configuration of crontab
>> During installation of SKYRiX an entry is added in crontab. It 
>> enables the execution of a script named aptnotify which sends 
>> notification mails. The default is:
> No cron tab was setup during installation.

No, only the SKYRiX packages have scripts to do an automatic setup of 
the environment.

> I wish there was a complete install guide which covered everything on 
> one page.  Is this possible?

We have the documentation subproject which works on documents like that.

best regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Tue Apr 20 22:17:03 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 20 Apr 2004 23:17:03 +0200
Subject: [OGo-Users] RFC 822 & Spam
In-Reply-To: <40855D11.1080807@ianus.ws>
References: <40852D7A.2030106@ianus.ws> <D7C9E75C-92E6-11D8-AE1D-000393C29C2A@opengroupware.org> <40855D11.1080807@ianus.ws>
Message-ID: <11E64D40-9310-11D8-AE1D-000393C29C2A@opengroupware.org>

On 20.04.2004, at 19:25, Luca wrote:
> Anyway rfc 2822 http://www.faqs.org/rfcs/rfc2822.html explicity says:
>> It is important to note that the header fields are not guaranteed to
>>   be in a particular order.

Exactly.

>>   They may appear in any order, and they
>>   have been known to be reordered occasionally when transported over
>>   the Internet.  However, for the purposes of this standard, header
>>   fields SHOULD NOT be reordered when a message is transported or
>>   transformed.

This only says something about gateways rewriting messages, not for the 
initial generation. So we are just fine here.

>>   More importantly, the trace header fields and resent
>>   header fields MUST NOT be reordered, and SHOULD be kept in blocks
>>   prepended to the message.  See sections 3.6.6 and 3.6.7 for more
>>   information.

Not related to the initial generation.

>>   The only required header fields are the origination date field and
>>   the originator address field(s).  All other header fields are
>>   syntactically optional.

So we are just fine here.

> Anyway rfc 822 http://www.faqs.org/rfcs/rfc822.html claims:
>>     Note:  Due to an artifact of the notational conventions, the syn-
>>            tax  indicates that, when present, some fields, must be in
>>            a particular order.  Header fields  are  NOT  required  to
>>            occur  in  any  particular  order, except that the message
>>            body must occur AFTER  the  headers.

So we are just fine here.

>>    It  is  recommended
>>            that,  if  present,  headers be sent in the order "Return-
>>            Path", "Received", "Date",  "From",  "Subject",  "Sender",
>>            "To", "cc", etc.

OK, I recommendation which probably makes sense. Could you create an 
enh-request to follow that order?

> And this was explicity contradicted by the new one.

I don't see any contradictions? OGo follows the excerpts of both, RFC 
822 and 2822.
It doesn't follow the 822 _recommendation_, which we should probably 
implement, though this is no _violation_ of RFC822 at all (tell that 
"Someone" ;-).

> Anyway, it's possible spam-detecting systems follow quite strictly 
> some obscure rule about headers order. Tomorrow we'll do some testing 
> trying header inversion. If this generates big differences in spam 
> likelihood, I'll open the bug.

Excellent.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Wed Apr 21 12:11:12 2004
From: users@opengroupware.org (Sebastian Breier)
Date: Wed, 21 Apr 2004 13:11:12 +0200
Subject: [OGo-Users] Problem with ZideStore
Message-ID: <408656D0.3050809@intellixx.de>

This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enigC5FBEDC9D2CCCC733A9F745B
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hi list!

(This mail has already been posted to users-de some time ago, but I
didn't get any feedback and I'm still unable to fix this problem...)

ZideStore doesn't work.
Calling http://<Server>/zidestore, I do get a page, but the image on it
doesn't work (http://<Server>/images/homepage.jpg). Which is not too 
important.

BUT, if I log in, and get passed to
http://<Server>/zidestore/weblogin, it says:

object not found: zidestore => weblogin

I have no idea what's wrong. The settings and the start script for 
ZideStore are out of some OGo-HOWTOs.

Btw, another question: I need ZideStore just for accessing OGo project
documents in a file system via WebDAV. Is there another way besides
ZideStore to do this?

Thanks in advance for any reply. :)
If You need more data from my installation or configuration I can make
them available instantly.

Some details:

--- Start of ZideStore ---
./ZideStore.woa/ix86/linux-gnu/gnu-fd-nil/ZideStore -WOPort 23000 
-OGoMinimumActiveSessionCount 0 -WOHttpAllowHost localhost &

--- ZideStore Defaults ---
{
     SxExplain = YES;
     WOCachingEnabled = YES;
     WOHttpTransactionUseSimpleParser = YES;
     WOPort = "localhost:23000";
     ZLFolderRefresh = 1;
}

--- Log when starting ZideStore ---
opengroupware@klimt:~/WOApps> Mar 26 09:56:28 ZideStore [8056]: SNS 
disabled.
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: Tasks.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: RSS.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: WCAP.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: Projects.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: Contacts.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: PrefsUI.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: EvoConnect.zsp
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| register ZideStore 
product: Appointments.zsp
dynamic load (dlopen) error:
/opt/opengroupware.org/Library/ZideStore12/Projects.zsp/ix86/linux-gnu/gnu-fd-nil/Projects: 
undefined symbol: __objc_class_name_OGoFileManagerFactory
Mar 26 09:56:28 ZideStore [8056]: [so-product-registry] could not load 
product: Projects
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| vMem Size check enabled: 
shutting down app when vMem > 200 MB
Mar 26 09:56:28 ZideStore [8056]: |ZideStore| WOHttpAdaptor listening on 
address <InetSocketAddress: *:23000>

--- Access (Log) ---
=> http://<Server>/zidestore

Mar 26 10:08:50 ZideStore [8262]: WOxElemBuilder: could not locate 
builders: 
WExCalElemBuilder,WExDnDElemBuilder,WExExtElemBuilder,WOxExtElemBuilder
Mar 26 10:08:50 ZideStore [8262]: WOCompoundElement: pool embedding is on.
Mar 26 10:08:50 ZideStore [8262]: WOCompoundElement: id logging is on.
192.168.1.1 - - [26/Mar/2004:10:08:50 GMT] "GET /zidestore HTTP/1.0" 200 
566 0.113 - - 1M

=> http://<Server>/zidestore/weblogin

Mar 26 10:09:30 ZideStore [8262]: |ZideStore| cannot create userfolder, 
not a login name: 'weblogin'
Mar 26 10:09:30 ZideStore [8262]: |ZideStore| cannot create userfolder, 
not a login name: 'weblogin'
Mar 26 10:09:30 ZideStore [8262]: |ZideStore| cannot create userfolder, 
not a login name: 'weblogin'
192.168.1.1 - - [26/Mar/2004:10:09:30 GMT] "GET /zidestore/weblogin 
HTTP/1.0" 404 42 0.497 - - 3M

Thank You,
     Sebastian Breier.

--------------enigC5FBEDC9D2CCCC733A9F745B
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAhlbTyv1UBXaBXL4RAtEIAKDC1voVTjX2/cUPGS+jo8S/WJcXMQCg1hRd
yAUC8mRCXXrFX/ZrF2OqC4I=
=3HB3
-----END PGP SIGNATURE-----

--------------enigC5FBEDC9D2CCCC733A9F745B--

From users@opengroupware.org  Wed Apr 21 13:24:21 2004
From: users@opengroupware.org (ogo)
Date: Wed, 21 Apr 2004 13:24:21 +0100
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <408656D0.3050809@intellixx.de>
References: <408656D0.3050809@intellixx.de>
Message-ID: <20040421111920.M84629@kraftpost.org>

hi

> ZideStore doesn't work.
> Calling http://<Server>/zidestore, I do get a page, but the image on 
> it doesn't work (http://<Server>/images/homepage.jpg). Which is not 
> too important.
> 
> BUT, if I log in, and get passed to
> http://<Server>/zidestore/weblogin, it says:

i think its the wrong address please try:
http://<Server>/zidestore/so/"any_username"/

m.


From users@opengroupware.org  Wed Apr 21 13:34:07 2004
From: users@opengroupware.org (ogo)
Date: Wed, 21 Apr 2004 13:34:07 +0100
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <20040421111920.M84629@kraftpost.org>
References: <408656D0.3050809@intellixx.de> <20040421111920.M84629@kraftpost.org>
Message-ID: <20040421113213.M85506@kraftpost.org>

hi 

you can also read this:

http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs/

m.

From users@opengroupware.org  Wed Apr 21 13:28:24 2004
From: users@opengroupware.org (Sebastian Breier)
Date: Wed, 21 Apr 2004 14:28:24 +0200
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <20040421113213.M85506@kraftpost.org>
References: <408656D0.3050809@intellixx.de> <20040421111920.M84629@kraftpost.org> <20040421113213.M85506@kraftpost.org>
Message-ID: <408668E8.7050407@intellixx.de>

This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enigD468D96FA314C60FC7D24A83
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

ogo wrote:
> hi 
> 
> you can also read this:
> 
> http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs/

Okay, thanks so far.

I think I've seen the /zidestore/so/<username> page already, but it
didn't really help me accessing the project files.

So, I've read that document above. The document states I should be able
to access a subdirectory within my user directory for the projects, 
called /zidestore/so/<username>/Projects.

When I access this page, OGo comes back to me with this web site:

object not found: sb => Projects

The ZideStore logs tell me this:

Apr 21 12:17:04 ZideStore [2011]: |SxUserFolder:<username>| ERROR: got 
no class for personal folder 'Projects': {
     class = SxProjectsFolder;
     config = {};
}
Apr 21 12:17:04 ZideStore [2011]: |ZideStore| cannot create userfolder, 
not a login name: 'Projects'
192.168.1.1 - - [21/Apr/2004:12:17:04 GMT] "GET 
/zidestore/so/<username>/Projects HTTP/1.0" 404 35 0.097 - - 0

(Of course, <username> was a real username when I tested it ;))

Any ideas? The log error message looks promising, but I don't know
what's wrong there... Google and searching the mailing list doesn't turn
up anything useful.

Bye,
	Sebastian.

--------------enigD468D96FA314C60FC7D24A83
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAhmjsyv1UBXaBXL4RAoydAJ0awMicgCFkUW+CQ7Gvlk4nUwzolgCg1heV
gzC0wECp6VT0V6tYWHJ13lM=
=dgdd
-----END PGP SIGNATURE-----

--------------enigD468D96FA314C60FC7D24A83--

From users@opengroupware.org  Wed Apr 21 14:02:07 2004
From: users@opengroupware.org (Kristjan Koppel)
Date: Wed, 21 Apr 2004 16:02:07 +0300
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <408668E8.7050407@intellixx.de>
References: <408656D0.3050809@intellixx.de> <20040421111920.M84629@kraftpost.org> <20040421113213.M85506@kraftpost.org> <408668E8.7050407@intellixx.de>
Message-ID: <408670CF.4070906@haberst.ee>

Hi!


I had the same problem just recently. You're trying to access ZideStore 
with your web browser, right? I don't think it's supposed to work this 
way. Try accessing http://<yourserver>/zidestore/so/<username>/Projects 
with a WebDAV client. I got the same error messages in my web browser 
but it works fine with Cadaver and OpenOffice.


--
Kristjan


Sebastian Breier wrote:

> ogo wrote:
>
>> hi
>> you can also read this:
>>
>> http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs/
>
>
> Okay, thanks so far.
>
> I think I've seen the /zidestore/so/<username> page already, but it
> didn't really help me accessing the project files.
>
> So, I've read that document above. The document states I should be able
> to access a subdirectory within my user directory for the projects, 
> called /zidestore/so/<username>/Projects.
>
> When I access this page, OGo comes back to me with this web site:
>
> object not found: sb => Projects
>
> The ZideStore logs tell me this:
>
> Apr 21 12:17:04 ZideStore [2011]: |SxUserFolder:<username>| ERROR: got 
> no class for personal folder 'Projects': {
>     class = SxProjectsFolder;
>     config = {};
> }
> Apr 21 12:17:04 ZideStore [2011]: |ZideStore| cannot create 
> userfolder, not a login name: 'Projects'
> 192.168.1.1 - - [21/Apr/2004:12:17:04 GMT] "GET 
> /zidestore/so/<username>/Projects HTTP/1.0" 404 35 0.097 - - 0
>
> (Of course, <username> was a real username when I tested it ;))
>
> Any ideas? The log error message looks promising, but I don't know
> what's wrong there... Google and searching the mailing list doesn't turn
> up anything useful.
>
> Bye,
>     Sebastian.


From users@opengroupware.org  Wed Apr 21 14:17:44 2004
From: users@opengroupware.org (Sebastian Breier)
Date: Wed, 21 Apr 2004 15:17:44 +0200
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <408670CF.4070906@haberst.ee>
References: <408656D0.3050809@intellixx.de> <20040421111920.M84629@kraftpost.org> <20040421113213.M85506@kraftpost.org> <408668E8.7050407@intellixx.de> <408670CF.4070906@haberst.ee>
Message-ID: <40867478.3040104@intellixx.de>

This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enig4F403084D007435B5D67452E
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Good idea!

But, well, again no luck. But we got more information again! ;)

When accessing http://<server>/zidestore/so/<username>/Projects with
cadaver, I got this:

--- ZideStore log ---
Apr 21 13:10:29 ZideStore [2167]: <|Rq:PROPFIND 0x083B8B0C|>D classified 
as WebDAV by user-agent (it's a DAV client)
Apr 21 13:10:29 ZideStore [2167]: |SxUserFolder:<username>| ERROR: got 
no class for personal folder 'Projects': {
     class = SxProjectsFolder;
     config = {};
}
192.168.1.1 - - [21/Apr/2004:13:10:29 GMT] "PROPFIND 
/zidestore/so/<username>/Projects/ HTTP/1.0" 404 35 0.008 - - 0

--- Cadaver Output ---
dav:!> open http://<server>/zidestore/so/<username>/Projects
Authentication required for SKYRiX on server `<server>':
Username: <username>
Password:
Could not access /zidestore/so/<username>/Projects/ (not WebDAV-enabled?):
404 Not Found
Connection to `<server>' closed.

I'll definitely look into this later. Do you have any other suggestions
which might be helpful?

Thanks,
	Sebastian.

Kristjan Koppel wrote:
> I had the same problem just recently. You're trying to access ZideStore 
> with your web browser, right? I don't think it's supposed to work this 
> way. Try accessing http://<yourserver>/zidestore/so/<username>/Projects 
> with a WebDAV client. I got the same error messages in my web browser 
> but it works fine with Cadaver and OpenOffice.
> 
> Sebastian Breier wrote:
> 
>> ogo wrote:
>>
>>> hi
>>> you can also read this:
>>>
>>> http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs/
>>
>>
>>
>> Okay, thanks so far.
>>
>> I think I've seen the /zidestore/so/<username> page already, but it
>> didn't really help me accessing the project files.
>>
>> So, I've read that document above. The document states I should be able
>> to access a subdirectory within my user directory for the projects, 
>> called /zidestore/so/<username>/Projects.
>>
>> When I access this page, OGo comes back to me with this web site:
>>
>> object not found: sb => Projects
>>
>> The ZideStore logs tell me this:
>>
>> Apr 21 12:17:04 ZideStore [2011]: |SxUserFolder:<username>| ERROR: got 
>> no class for personal folder 'Projects': {
>>     class = SxProjectsFolder;
>>     config = {};
>> }
>> Apr 21 12:17:04 ZideStore [2011]: |ZideStore| cannot create 
>> userfolder, not a login name: 'Projects'
>> 192.168.1.1 - - [21/Apr/2004:12:17:04 GMT] "GET 
>> /zidestore/so/<username>/Projects HTTP/1.0" 404 35 0.097 - - 0
>>
>> (Of course, <username> was a real username when I tested it ;))
>>
>> Any ideas? The log error message looks promising, but I don't know
>> what's wrong there... Google and searching the mailing list doesn't turn
>> up anything useful.
>>
>> Bye,
>>     Sebastian.
> 
> 


--------------enig4F403084D007435B5D67452E
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAhnSByv1UBXaBXL4RAv8HAJ9dEvjN7IRqJMx7pGaxsIVgu/Sy+gCfSFdK
Eu0pVNjLJy6M/aK5zhJ4fnI=
=zGN4
-----END PGP SIGNATURE-----

--------------enig4F403084D007435B5D67452E--

From users@opengroupware.org  Wed Apr 21 14:52:34 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 15:52:34 +0200
Subject: [OGo-Users] zidestore and mozilla calendar
Message-ID: <005901c427a7$e608e1e0$8f3bc781@hermes>

Hello list!
I installed ogo webui and the zidestore on a sarge box.
When i connect to the zidestore  with
"http://<server>/zidestore/so/<user>/calendar.ics , the start, the end and
the location of the appointment are retrieved but not the title !
the title is needed. is there something to configure ?
Regards
_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Wed Apr 21 15:05:06 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 16:05:06 +0200
Subject: [OGo-Users] ngobjweb module enabling for apache on debian sarge
Message-ID: <005f01c427a9$a6777760$8f3bc781@hermes>

Hello,
here's a tip to use the apache module activation on debian sarge :

create a file  /usr/lib/apache/1.3/500ngobjweb.info containing the text :
LoadModule: ngobjweb_module
/usr/lib/opengroupware.org/WebServer/ngobjweb_1.3.29.so
then type :
# /usr/sbin/modules-config apache enable ngobjweb
comment out the other mentions to ngobjweb, then restart apache :
# apachectl graceful

ELH


_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Wed Apr 21 15:11:55 2004
From: users@opengroupware.org (Marco Marongiu)
Date: Wed, 21 Apr 2004 16:11:55 +0200
Subject: [OGo-Users] ngobjweb module enabling for apache on debian sarge
In-Reply-To: <005f01c427a9$a6777760$8f3bc781@hermes>
References: <005f01c427a9$a6777760$8f3bc781@hermes>
Message-ID: <4086812B.4050701@tiscali.com>

Nice tip, thanks!

éric le hénaff wrote:
> Hello,
> here's a tip to use the apache module activation on debian sarge :
> 
> create a file  /usr/lib/apache/1.3/500ngobjweb.info containing the text :
> LoadModule: ngobjweb_module
> /usr/lib/opengroupware.org/WebServer/ngobjweb_1.3.29.so
> then type :
> # /usr/sbin/modules-config apache enable ngobjweb
> comment out the other mentions to ngobjweb, then restart apache :
> # apachectl graceful

From users@opengroupware.org  Wed Apr 21 15:36:53 2004
From: users@opengroupware.org (Luca)
Date: Wed, 21 Apr 2004 16:36:53 +0200
Subject: [OGo-Users] RFC 822 & Spam
In-Reply-To: <11E64D40-9310-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <40852D7A.2030106@ianus.ws> <D7C9E75C-92E6-11D8-AE1D-000393C29C2A@opengroupware.org> <40855D11.1080807@ianus.ws> <11E64D40-9310-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <40868705.3010704@ianus.ws>

Helge Hess wrote:

> I don't see any contradictions? OGo follows the excerpts of both, RFC 
> 822 and 2822.
> It doesn't follow the 822 _recommendation_, which we should probably 
> implement, though this is no _violation_ of RFC822 at all (tell that 
> "Someone" ;-). 

Well, I don't know who it is. Someone at moldtelecom, I guess.

We had a bit of testing, in the morning. This is what was pointed out:

We noticed X-Mailer field raises more than 3 points in spam evaluation. This is
due to omonimy with website. Spamassassin does not like this. Adding simply a
version number to X-Mailer, or removing .org seems to fix the problem, lowing
spam evaluation to 1.1.

Added to bug #724

Regards, Luca.




=======================================

Ianus s.r.l. Infrastrutture Informatiche
Via G.Pesci 16, 44100 FERRARA
Tel: +39 0532 909235
Fax: +39 0532 907056
Email: info@ianus.ws
Web: http://www.ianus.ws

=======================================


From users@opengroupware.org  Wed Apr 21 15:50:53 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 16:50:53 +0200
Subject: Fw: [OGo-Users] zidestore and mozilla calendar
Message-ID: <007d01c427b0$0bc73af0$8f3bc781@hermes>

ok , i got the point.
it's because of the little signs french people like to put everywhere :
accents.
when i remove the accents off the title, calendar manages to retrieve the
title of the appointment.
How to configure so the accents are welcomed ?
ELH
----- Original Message ----- 
From: "éric le hénaff" <eric.le.henaff@ens.fr>
To: <users@opengroupware.org>
Sent: Wednesday, April 21, 2004 3:52 PM
Subject: [OGo-Users] zidestore and mozilla calendar


> Hello list!
> I installed ogo webui and the zidestore on a sarge box.
> When i connect to the zidestore  with
> "http://<server>/zidestore/so/<user>/calendar.ics , the start, the end and
> the location of the appointment are retrieved but not the title !
> the title is needed. is there something to configure ?
> Regards
> _____________________________________
>
> Eric LE HENAFF
> Informaticien
> Centre de Ressources Informatiques
> Ecole Normale Supérieure
> Paris
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Wed Apr 21 15:55:34 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 16:55:34 +0200
Subject: [OGo-Users] script to lauch the zidestore service
Message-ID: <008301c427b0$b32573c0$8f3bc781@hermes>

i adapted the  Henrik Holmboe's init script to be able to launch
idependently the zidestore service.
it works on a debian sarge.

#!/bin/sh
#
# Startup script for OpenGroupware ZideStore on UNIX systems.

# NOTE: This script currently needs to have an environment that
# automatically sources ~/OpenGroupware.sh. This is achievable with
# this command:
#
# echo "source /OpenGroupware.sh" >> ~/.bash_profile

# chkconfig: 2345 75 25
# description: OpenGroupware is a groupware server
# changelog :
# orignally created by Henrik Holmboe for the web interface service
# ELH 21APR04 adapted by eric le henaff for the zidestore service

# Configuration section

OGO_NAME="OpenGroupware ZideStore"
OGO_DIR=/usr/lib/opengroupware.org
OGO_BIN=$OGO_DIR/WOApps/ZideStore.woa/ix86/linux-gnu/gnu-fd-nil/ZideStore
OGO_ARGS="-WOHttpAllowHost localhost"
PID_FILE=/var/run/ogo-zidestore.pid
LOG=/var/log/ogo-zidestore.log

# end configuration section


# Source function library.
# Use the funtions provided by Red Hat or use our own
if [ -f /etc/rc.d/init.d/functions ]
then
        . /etc/rc.d/init.d/functions
else
        function action {
                echo "$1"
                shift
                $@
        }
        function success {
                echo -n "Success"
        }
        function failure {
                echo -n "Failed"
        }
fi


[ -x $OGO_BIN ] || exit 0

case "$1" in
        start)
                echo -n  "Starting $OGO_NAME: "
                pushd $OGO_DIR > /dev/null

                # log separator
                echo
"----------------------------------------------------------------------" >>
$LOG

                # run as a user 'opengroupware':
                if [ "`uname -s`" = "Linux" ]; then
                    env -i su - opengroupware -c "$OGO_BIN $OGO_ARGS" >>
$LOG 2>&1 &
                elif [ "`uname -s`" = "FreeBSD" ]; then
                    env -i su -l opengroupware -c "$OGO_BIN $OGO_ARGS" >>
$LOG 2>&1 &
                fi

                echo $! > $PID_FILE
                popd > /dev/null
                success "Starting $OGO_NAME"
                echo
                ;;

        stop)
                echo -n "Shutting down $OGO_NAME: "
                if test -f "$PID_FILE" ; then
                        PID=`cat $PID_FILE`
                        if kill $PID >> $LOG 2>&1 ; then
                                /bin/rm $PID_FILE
                                success "Shutting down $OGO_NAME"
                        else
                                echo ""
                                echo "Could not kill process $PID named in
$PID_FILE. Check tail of $LOG."
                                failure "Shutting down $OGO_NAME"
                        fi
                else
                        echo ""
                        echo "No $OGO_NAME pid file found. Looked for
$PID_FILE."
                        failure "No $OGO_NAME pid file found. Looked for
$PID_FILE."
                fi
                echo
                ;;

        restart)
                $0 stop
                $0 start
                ;;

        *)
                echo "Usage: $0 {start|stop|restart}"
                exit 1

esac

exit 0

_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Wed Apr 21 17:49:15 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 18:49:15 +0200
Subject: [OGo-Users] what is icalsaxdriver ?
Message-ID: <00bb01c427c0$94c2b950$8f3bc781@hermes>

My server is a debian sarge box .

what is icalsaxdriver ?
should i install it ? it seems not to be part of the opengroupware package
but is the avalaible pacakges.
What functionnalities does it add to ogo ?
regards
_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Wed Apr 21 18:09:46 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 19:09:46 +0200
Subject: [OGo-Users] icalsaxdriver second try
Message-ID: <00c301c427c3$72346980$8f3bc781@hermes>

oops, it did it again ..
second try

My server is a debian sarge box .

what is icalsaxdriver ?
should i install it ? it seems not to be part of the opengroupware
meta-package
but it is in the avalaible packages in the opengrouware debian repository.
What functionnalities does it add to ogo ?
What are the relationships between the packages
opengroupware.org-xml-icalsaxdriver, opengroupware.org-xml-libxmlsaxdriver,
opengroupware.org-xml-stxsaxdriver,  opengroupware.org-libical ? Which ones
are used ? which ones are not ?

regards

_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Wed Apr 21 18:12:10 2004
From: users@opengroupware.org (Marco Marongiu)
Date: Wed, 21 Apr 2004 19:12:10 +0200
Subject: [OGo-Users] icalsaxdriver second try
In-Reply-To: <00c301c427c3$72346980$8f3bc781@hermes>
References: <00c301c427c3$72346980$8f3bc781@hermes>
Message-ID: <4086AB6A.7090605@tiscali.com>


éric le hénaff wrote:
> oops, it did it again ..
> second try
> 
> My server is a debian sarge box .
> 
> what is icalsaxdriver ?
> should i install it ? it seems not to be part of the opengroupware
> meta-package
> but it is in the avalaible packages in the opengrouware debian repository.
> What functionnalities does it add to ogo ?
> What are the relationships between the packages
> opengroupware.org-xml-icalsaxdriver, opengroupware.org-xml-libxmlsaxdriver,
> opengroupware.org-xml-stxsaxdriver,  opengroupware.org-libical ? Which ones
> are used ? which ones are not ?

Too many questions, sorry :-)))

Seriously, I can tell you just my 2 cents of knowledge about it: you 
need *ical* packages and related ones if you are going to share 
calendars via ZideStore. Otherwise, you don't need them.

These were my 2 cents; if they aren't good enough I know that someone 
will come with a full Euro :-)

Ciao
--bronto

From users@opengroupware.org  Wed Apr 21 18:17:06 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 19:17:06 +0200
Subject: [OGo-Users] icalsaxdriver second try
References: <00c301c427c3$72346980$8f3bc781@hermes> <4086AB6A.7090605@tiscali.com>
Message-ID: <00df01c427c4$78c842c0$8f3bc781@hermes>

it seems that i already have the ones i need to view the calendars with
mozilla calendar.
... but i cant publish on the server with mozilla calendar ...
maybe the icalsaxdriver is needed.

----- Original Message ----- 
From: "Marco Marongiu" <bronto@tiscali.com>
To: <users@opengroupware.org>
Sent: Wednesday, April 21, 2004 7:12 PM
Subject: Re: [OGo-Users] icalsaxdriver second try


>
>
> éric le hénaff wrote:
> > oops, it did it again ..
> > second try
> >
> > My server is a debian sarge box .
> >
> > what is icalsaxdriver ?
> > should i install it ? it seems not to be part of the opengroupware
> > meta-package
> > but it is in the avalaible packages in the opengrouware debian
repository.
> > What functionnalities does it add to ogo ?
> > What are the relationships between the packages
> > opengroupware.org-xml-icalsaxdriver,
opengroupware.org-xml-libxmlsaxdriver,
> > opengroupware.org-xml-stxsaxdriver,  opengroupware.org-libical ? Which
ones
> > are used ? which ones are not ?
>
> Too many questions, sorry :-)))
>
> Seriously, I can tell you just my 2 cents of knowledge about it: you
> need *ical* packages and related ones if you are going to share
> calendars via ZideStore. Otherwise, you don't need them.
>
> These were my 2 cents; if they aren't good enough I know that someone
> will come with a full Euro :-)
>
> Ciao
> --bronto
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Wed Apr 21 18:16:54 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 21 Apr 2004 19:16:54 +0200
Subject: [OGo-Users] what is icalsaxdriver ?
In-Reply-To: <00bb01c427c0$94c2b950$8f3bc781@hermes>
References: <00bb01c427c0$94c2b950$8f3bc781@hermes>
Message-ID: <AFCB2D0E-93B7-11D8-AE1D-000393C29C2A@opengroupware.org>

On 21.04.2004, at 18:49, =E9ric le h=E9naff wrote:
> what is icalsaxdriver ?

Well, an iCalendar SAX driver.

> should i install it ?

Depends on what you want to do.

> it seems not to be part of the opengroupware package but is the=20
> avalaible pacakges.

Not sure what you want to say here. It is part of the OGo package.

> What functionnalities does it add to ogo ?

Parsing of iCalendar files, like those submitted by Apple iCal or=20
Mozilla Calendar.

regards,
   Helge
--=20
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Wed Apr 21 18:19:01 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 21 Apr 2004 19:19:01 +0200
Subject: [OGo-Users] icalsaxdriver second try
In-Reply-To: <00c301c427c3$72346980$8f3bc781@hermes>
References: <00c301c427c3$72346980$8f3bc781@hermes>
Message-ID: <FB476280-93B7-11D8-AE1D-000393C29C2A@opengroupware.org>

On 21.04.2004, at 19:09, =E9ric le h=E9naff wrote:
> What are the relationships between the packages
> opengroupware.org-xml-icalsaxdriver,=20
> opengroupware.org-xml-libxmlsaxdriver,
> opengroupware.org-xml-stxsaxdriver,  opengroupware.org-libical ?

All of them are SAX drivers:
   http://sax.sourceforge.net/

> Which ones are used ? which ones are not ?

All of them are used in certain contexts. Depends on what you do.=20
Strictly required is only a driver which parses XML (like for example=20
libxmlsaxdriver).

STX is for parsing structured text and iCal is for parsing iCalendar.

Greets
   Helge
--=20
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Wed Apr 21 18:23:15 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Wed, 21 Apr 2004 19:23:15 +0200
Subject: [OGo-Users] icalsaxdriver second try
References: <00c301c427c3$72346980$8f3bc781@hermes> <4086AB6A.7090605@tiscali.com> <00df01c427c4$78c842c0$8f3bc781@hermes>
Message-ID: <00e501c427c5$54a13c70$8f3bc781@hermes>

only  opengroupware.org-libical was apt-get installed.
opengroupware.org-xml-icalsaxdriver, opengroupware.org-xml-libxmlsaxdriver,
opengroupware.org-xml-stxsaxdriver were not.

----- Original Message ----- 
From: "éric le hénaff" <eric.le.henaff@ens.fr>
To: <users@opengroupware.org>
Sent: Wednesday, April 21, 2004 7:17 PM
Subject: Re: [OGo-Users] icalsaxdriver second try


> it seems that i already have the ones i need to view the calendars with
> mozilla calendar.
> ... but i cant publish on the server with mozilla calendar ...
> maybe the icalsaxdriver is needed.
>
> ----- Original Message ----- 
> From: "Marco Marongiu" <bronto@tiscali.com>
> To: <users@opengroupware.org>
> Sent: Wednesday, April 21, 2004 7:12 PM
> Subject: Re: [OGo-Users] icalsaxdriver second try
>
>
> >
> >
> > éric le hénaff wrote:
> > > oops, it did it again ..
> > > second try
> > >
> > > My server is a debian sarge box .
> > >
> > > what is icalsaxdriver ?
> > > should i install it ? it seems not to be part of the opengroupware
> > > meta-package
> > > but it is in the avalaible packages in the opengrouware debian
> repository.
> > > What functionnalities does it add to ogo ?
> > > What are the relationships between the packages
> > > opengroupware.org-xml-icalsaxdriver,
> opengroupware.org-xml-libxmlsaxdriver,
> > > opengroupware.org-xml-stxsaxdriver,  opengroupware.org-libical ? Which
> ones
> > > are used ? which ones are not ?
> >
> > Too many questions, sorry :-)))
> >
> > Seriously, I can tell you just my 2 cents of knowledge about it: you
> > need *ical* packages and related ones if you are going to share
> > calendars via ZideStore. Otherwise, you don't need them.
> >
> > These were my 2 cents; if they aren't good enough I know that someone
> > will come with a full Euro :-)
> >
> > Ciao
> > --bronto
> > -- 
> > OpenGroupware.org Users
> > users@opengroupware.org
> > http://mail.opengroupware.org/mailman/listinfo/users
> >
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Tue Apr 20 00:18:38 2004
From: users@opengroupware.org (mik donegi)
Date: Tue, 20 Apr 2004 01:18:38 +0200
Subject: [OGo-Users] searching an appointment
Message-ID: <c61moq$p6e$1@sea.gmane.org>

I want to search an appointment throughout a year


Contacts -> person viewer -> appointment looks for the appointments of the
next month


Is it  possible to extend the range of search ?

Thanks




From users@opengroupware.org  Tue Apr 20 20:44:05 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Tue, 20 Apr 2004 15:44:05 -0400
Subject: [OGo-Users] skyaptnotify Uncatched Objective-C exception
In-Reply-To: <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <407E928C.60106@gonsman.com> <638CEDF4-92EE-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <40857D85.4040909@abovemedia.com>

> Hm, need to ask Chris whether this is in the SKYRiX 4.1 manuals. This 
> page contains some more defaults on skyaptnotify:
>   http://docs.opengroupware.org/Members/helge/ports/iSeries/view 

I looked over these docs, but I don't know what to do with them.  Should 
I run the commands from a shell promt in the section "aptnotify Defaults"?

> Maybe you could try to set the AptNotifyBeVerbose to YES for more log 
> output. 

There is no log output.  Is it supposed to log to a file other than 
"/var/log/ogo.log"?

> Please ensure that OpenGroupware.org.sh is properly sourced prior 
> starting skyaptnotify (eg by wrapping skyaptnotify in a shell script). 

I am kinda new to Linux, what does this mean?

> [GDB]
>
>> I tried the thing below, but in the back trace I get about 4,000 
>> lines.  And I guess that wouldn't be good for a mailing list :)
>
>
> Well, then please just send the top 30 and the bottom 30 lines. 

#0  0x401fb07b in Avsprintf (format=0x402e0fa4, args=0xbfeed28c "\004") 
at common.m:366
#1  0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x824832c, _cmd=0x402e7dd0, format=0x402e0fa4,
    argList=0xbfeed28c "\004") at NSString.m:2255
#2  0x402329bc in +[NSString(NSStringCreation) stringWithFormat:] 
(self=0x402e7ba0, _cmd=0x402e0db0, format=0x402e0fa4)
    at NSString.m:1458
#3  0x402146b8 in -[NSDictionary descriptionWithLocale:indent:] 
(self=0x8248394, _cmd=0x402e0da0, locale=0x0, indent=0)
    at NSDictionary.m:467
#4  0x402152c4 in -[NSDictionary description] (self=0x8248394, 
_cmd=0x402ddbd0) at NSDictionary.m:576
#5  0x40201685 in -[NSException(Extensions) errorString] 
(self=0x8248344, _cmd=0x402ddaf0) at NSException.m:293
#6  0x40200aca in _default_exception_handler (exception=0x8248344) at 
NSException.m:67
#7  0x4020124d in -[NSException raise] (self=0x8248344, _cmd=0x402eba70) 
at NSException.m:226
#8  0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
    fileName=0x402ebbac) at NSCharacterSet.m:85
#9  0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#10 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x8247a7c, _cmd=0x402f5460, format=0x402e0fa4,
    context=0xbfeed90c) at FormatScanner.m:157
#11 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x8247a7c, _cmd=0x402dc460,
    format=0x402e0fa4, args=0xbfeed9dc "\004") at PrintfFormatScanner.m:43
#12 0x401fb0f8 in Avsprintf (format=0x402e0fa4, args=0xbfeed9dc "\004") 
at common.m:369
#13 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x82479fc, _cmd=0x402e7dd0, format=0x402e0fa4,
    argList=0xbfeed9dc "\004") at NSString.m:2255
#14 0x402329bc in +[NSString(NSStringCreation) stringWithFormat:] 
(self=0x402e7ba0, _cmd=0x402e0db0, format=0x402e0fa4)
    at NSString.m:1458
#15 0x402146b8 in -[NSDictionary descriptionWithLocale:indent:] 
(self=0x8247a64, _cmd=0x402e0da0, locale=0x0, indent=0)
    at NSDictionary.m:467
#16 0x402152c4 in -[NSDictionary description] (self=0x8247a64, 
_cmd=0x402ddbd0) at NSDictionary.m:576
#17 0x40201685 in -[NSException(Extensions) errorString] 
(self=0x8247a14, _cmd=0x402ddaf0) at NSException.m:293
#18 0x40200aca in _default_exception_handler (exception=0x8247a14) at 
NSException.m:67
#19 0x4020124d in -[NSException raise] (self=0x8247a14, _cmd=0x402eba70) 
at NSException.m:226
#20 0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
#21 0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#22 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x824714c, _cmd=0x402f5460, format=0x402e0fa4,
    context=0xbfeee05c) at FormatScanner.m:157
#23 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x824714c, _cmd=0x402dc460,
    format=0x402e0fa4, args=0xbfeee12c "\004") at PrintfFormatScanner.m:43
#24 0x401fb0f8 in Avsprintf (format=0x402e0fa4, args=0xbfeee12c "\004") 
at common.m:369
#25 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x82470cc, _cmd=0x402e7dd0, format=0x402e0fa4,
    argList=0xbfeee12c "\004") at NSString.m:2255
#26 0x402329bc in +[NSString(NSStringCreation) stringWithFormat:] 
(self=0x402e7ba0, _cmd=0x402e0db0, format=0x402e0fa4)
    at NSString.m:1458
#27 0x402146b8 in -[NSDictionary descriptionWithLocale:indent:] 
(self=0x8247134, _cmd=0x402e0da0, locale=0x0, indent=0)
    at NSDictionary.m:467
#28 0x402152c4 in -[NSDictionary description] (self=0x8247134, 
_cmd=0x402ddbd0) at NSDictionary.m:576
#29 0x40201685 in -[NSException(Extensions) errorString] 
(self=0x82470e4, _cmd=0x402ddaf0) at NSException.m:293


#7159 0x4020124d in -[NSException raise] (self=0x80eec8c, 
_cmd=0x402eba70) at NSException.m:226
#7160 0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
---Type <return> to continue, or q <return> to quit---
    fileName=0x402ebbac) at NSCharacterSet.m:85
#7161 0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#7162 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x80edd1c, _cmd=0x402f5460, format=0x8054244,
    context=0xbfffdf4c) at FormatScanner.m:157
#7163 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x80edd1c, _cmd=0x402dc460,
    format=0x8054244, args=0xbfffe024 "lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") 
at PrintfFormatScanner.m:43
#7164 0x401fb0f8 in Avsprintf (format=0x8054244, args=0xbfffe024 
"lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") at common.m:369
#7165 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x80ec7c4, _cmd=0x402de218, format=0x8054244,
    argList=0xbfffe024 "lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") at NSString.m:2255

#7166 0x40203644 in NSLogv (format=0x8054244, args=0xbfffe024 
"lÊ\016\blÊ\016\b\"¹\004\bxàÿ¿À¼") at NSUtilities.m:71
#7167 0x40203513 in NSLog (format=0x8054244) at NSUtilities.m:55
#7168 0x0804b93b in _start ()
#7169 0x0804ba0d in _start ()
#7170 0x4020124d in -[NSException raise] (self=0x80eca6c, 
_cmd=0x402eba70) at NSException.m:226
#7171 0x4024c301 in +[NSCharacterSet characterSetWithContentsOfFile:] 
(self=0x402eb980, _cmd=0x402eba90,
    fileName=0x402ebbac) at NSCharacterSet.m:85
#7172 0x4024c506 in +[NSCharacterSet decimalDigitCharacterSet] 
(self=0x402eb980, _cmd=0x402f5250) at NSCharacterSet.m:116
#7173 0x402744ff in -[FormatScanner parseFormatString:context:] 
(self=0x80e6c44, _cmd=0x402f5460, format=0x404cf164,
    context=0xbfffe1bc) at FormatScanner.m:157
#7174 0x402754a6 in -[PrintfFormatScanner stringWithFormat:arguments:] 
(self=0x80e6c44, _cmd=0x402dc460,
    format=0x404cf164, args=0xbfffe294 "t3\n@@ñL@àðL@ç~1@\030'/@") at 
PrintfFormatScanner.m:43
#7175 0x401fb0f8 in Avsprintf (format=0x404cf164, args=0xbfffe294 
"t3\n@@ñL@àðL@ç~1@\030'/@") at common.m:369
#7176 0x402350af in -[NSTemporaryString initWithFormat:arguments:] 
(self=0x80c9984, _cmd=0x402de218, format=0x404cf164,
    argList=0xbfffe294 "t3\n@@ñL@àðL@ç~1@\030'/@") at NSString.m:2255
#7177 0x40203644 in NSLogv (format=0x404cf164, args=0xbfffe294 
"t3\n@@ñL@àðL@ç~1@\030'/@") at NSUtilities.m:71
#7178 0x40203513 in NSLog (format=0x404cf164) at NSUtilities.m:55

#7179 0x40472f20 in +[EOAdaptor adaptorWithName:] (self=0x404cede0, 
_cmd=0x400a3c38, adaptorName=0x400a3374)
    at EOAdaptor.m:132
#7180 0x4006a63c in LSCommandRunV ()
   from 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil/libLSFoundation_d.so.5.0
---Type <return> to continue, or q <return> to quit---
#7181 0x4006aa8e in LSCommandRunV ()
   from 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil/libLSFoundation_d.so.5.0
#7182 0x40069a84 in LSCommandRunV ()
   from 
/opt/opengroupware.org/Libraries/ix86/linux-gnu/gnu-fd-nil/libLSFoundation_d.so.5.0
#7183 0x0804bbeb in _start ()
#7184 0x0804a281 in _start ()
#7185 0x0804b85f in _start ()
#7186 0x0804bb3a in _start ()
#7187 0x080509d0 in main ()
#7188 0x42015574 in __libc_start_main () from /lib/tls/libc.so.6

-Sean


From users@opengroupware.org  Tue Apr 20 21:15:32 2004
From: users@opengroupware.org (Chris McClement)
Date: Wed, 21 Apr 2004 08:15:32 +1200
Subject: [OGo-Users] How do I get gnustep-objc?
Message-ID: <20040420201624.473ED3CE774@mail.opengroupware.org>

Hi

I'm trying to build OGo on a gentoo box.  Unfortunately I'm stuck at
building the ThirdParty Modules.

------------------------------

cd gnustep-objc

make -s debug=yes install

cd ..
------------------------------

Where is the "gnustep-objc" directory?  I've searched for it on my
system, an no go.  I've tried trawling for it via google, and all I get
to is the gcc site.  I have gcc on my system -- in fact I have compiled
OGo using the experimental gentoo ebuild (just couldn't get it to
respond to browser requests so I though I better build it from scratch
myself) so I am pretty sure my system has all the requirements for
building OGo -- it's just I want to do it exactly as per instructions to
have the best chance of getting it working.

Can anyone give me a hand at getting this step done?

Cheers,
Chrisis



From users@opengroupware.org  Wed Apr 21 20:32:58 2004
From: users@opengroupware.org (Laurence Southon)
Date: Wed, 21 Apr 2004 20:32:58 +0100
Subject: [OGo-Users] Re: Localise holidays
In-Reply-To: <20040420194501.7067.64684.Mailman@mail.opengroupware.org>
Message-ID: <CDENKEKJOLCCALOOIHOFKEPBDIAA.ogousers@southon.uk.net>

> -----Original Message-----
> From: Olivier Hallot <olivier@ig.com.br>
> Date: Tue, 20 Apr 2004 08:34:28 -0300
> Subject: [OGo-Users] Re: Localise holidays
> Reply-To: users@opengroupware.org
>
> Laurence Southon wrote:
> > I'm not at all sure what I should be doing to localise Public
> Holidays to my
> > UK location, and remove (fascinating as they are!) references to German
> > holidays. I have a Debian install.
>
> Me neither!
>
> >
> > Should I edit:
> >
> >
> /usr/lib/opengroupware.org/Libraries/Resources/OGoScheduler/Holida
> ys.plist?
> >
> > There is a document at docs.opengroupware.org which says I
> should overwrite
> > using NSGlobalDomain.plist.
>
> spent week hacking this doc and still not there... as usual, I am
> missing the obvious... Gave up for a while. Fresh synapses on urgent need.

I'll give it a try, but don't hold your breath as I am still a bit new to
Linux.
Might strike lucky!


> But I find 3 instances of NSGlobalDomain.plist
> > in my install. Which one should it be?
> >
> If this is to be set by the Defaults command, then it will act on the file
>
> ~/.libFoundation/Defaults/NSGlobalDomain.plist
>
> (note the hidden directory)

Yep, got it.

> > On a more general note, I have done some customisation to UK English, eg
> > Zip -> PostCode, Vacation -> Holiday. Should I just patch the files I've
> > edited, or is there a way of having a UK_English.lproj?
> >
> You may submit a bug to OGo bugzilla with your contribution, for later
> enhancement/inclusion of/into OGo.
>
> Actually, UK_English.lproj can be quite small since any missing
> reference into your   ~/Resource/UK_English.lproj/<>.string file will be
> filled by the corresponding English.lproj string file..., in other
> words, work on the differences only.


That's interesting to know. Makes the task quite easy then. Thanks for that.

Regards,

Laurence Southon
London, UK



From users@opengroupware.org  Wed Apr 21 21:12:01 2004
From: users@opengroupware.org (Martin R Morales)
Date: Wed, 21 Apr 2004 13:12:01 -0700
Subject: [OGo-Users] DB and Apache  Errors
Message-ID: <4086D591.5000404@seekio.com>

This is a multi-part message in MIME format.
--------------090401020905020009050002
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hello Everyone,

I am in the process of evaluating OpenGroupware for our location.
I have installed OGo on Debian following the install instructions
on the Debian HowTo. Currently I am the only one using the system.

Please let me know if more information is needed, I'm very interested
in seeing this application working to full potential.

I have been seeing these DB errors every so often. I seems to happen
at the same time I try to sync Mozilla with OGo. I'm not 100% confident
that they are related. I know that when I try to sync Mozilla and OGo
I get an Apache error "Internal Server Error". To sync the to apps
seems to work sometimes and not others.

The DB error I am encountering is::

<start>

Apr 21 12:56:02 ZideStore [27455]: <0x0876FD54[SxAptManager]> process 9 
gids ...
EXCEPTION: (Exception name:PostgreSQL72FatalError 
class:PostgreSQL72Exception reason:fatal pgsql error 
(channel=<PostgreSQL72Channel[0x08766574] connection=0x08766770>): 
ERROR:  syntax error at or near ")" at character 69
 info:<nil>)

<stop>

I had read about the database tools and using the database update tool
(/usr/lib/opengroupware.org/Database/PostgreSQL =>executed: psql < 
pg-update-schema.psql)
I have done this and stop and restarted all components (Ogo, ZideStore, 
PostgreSQL),
and am still encountering the DB errors and the apache errors.

Any ideas? Is there some docs I'm not finding or have not come accross yet?

Thank you for your time,
~Martin

--------------090401020905020009050002
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
  <title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
<span style="font-family: monospace;">Hello Everyone,<br>
<br>
I am in the process of evaluating OpenGroupware for our location.<br>
I have installed OGo on Debian following the install instructions<br>
on the Debian HowTo. Currently I am the only one using the system.<br>
<br>
Please let me know if more information is needed, I'm very interested<br>
in seeing this application working to full potential.<br>
<br>
I have been seeing these DB errors every so often. I seems to happen<br>
at the same time I try to sync Mozilla with OGo. I'm not 100% confident<br>
that they are related. I know that when I try to sync Mozilla and OGo<br>
I get an Apache error "Internal Server Error". To sync the to apps<br>
seems to work sometimes and not others.<br>
<br>
The DB error I am encountering is::<br>
<br>
&lt;start&gt;<br>
<br>
Apr 21 12:56:02 ZideStore [27455]: &lt;0x0876FD54[SxAptManager]&gt;
process 9 gids ...<br>
EXCEPTION: (Exception name:PostgreSQL72FatalError
class:PostgreSQL72Exception reason:fatal pgsql error
(channel=&lt;PostgreSQL72Channel[0x08766574]
connection=0x08766770&gt;): ERROR:&nbsp; syntax error at or near ")" at
character 69<br>
&nbsp;info:&lt;nil&gt;)<br>
<br>
&lt;stop&gt;<br>
<br>
I had read about the database tools and using the database update tool<br>
(/usr/lib/opengroupware.org/Database/PostgreSQL =&gt;executed: psql
&lt; pg-update-schema.psql)<br>
I have done this and stop and restarted all components (Ogo, ZideStore,
PostgreSQL),<br>
and am still encountering the DB errors and the apache errors.<br>
<br>
Any ideas? Is there some docs I'm not finding or have not come accross
yet?<br>
<br>
Thank you for your time,<br>
~Martin<br>
</span>
</body>
</html>

--------------090401020905020009050002--


From users@opengroupware.org  Wed Apr 21 21:42:18 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 21 Apr 2004 22:42:18 +0200
Subject: [OGo-Users] How do I get gnustep-objc?
In-Reply-To: <20040420201624.473ED3CE774@mail.opengroupware.org>
References: <20040420201624.473ED3CE774@mail.opengroupware.org>
Message-ID: <61912146-93D4-11D8-A742-00039340AF4A@opengroupware.org>

On 20.04.2004, at 22:15, Chris McClement wrote:
> I'm trying to build OGo on a gentoo box.=A0 Unfortunately I'm stuck at
> building the ThirdParty Modules.
> ------------------------------
> cd gnustep-objc
> make -s debug=3Dyes install
> cd ..
> ------------------------------
>
> Where is the "gnustep-objc" directory?

In OpenGroupware.org/ThirdParty/gnustep-objc if you checked out from=20
CVS or use the sources-all.tgz.

> I've tried trawling for it via google, and all I get to is the gcc=20
> site.

Use the one which comes with OGo.

regards,
   Helge
--=20
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Wed Apr 21 15:23:57 2004
From: users@opengroupware.org (chris h)
Date: Wed, 21 Apr 2004 10:23:57 -0400
Subject: [OGo-Users] confirmation only
Message-ID: <200404211023.57194.chris123@magma.ca>

A few weeks back an OGo update produced new entries in the root account. 
Specifically, Config admin and Cyrus Admin. As I have not been able to get 
these to work, (Cyrus Admin in fact should not work as I use an ISP provided 
IMAP account at this time for testing with no root access) I was wondering if 
these new modules are complete and functional or are in progress. 

Regards

/ch

From users@opengroupware.org  Wed Apr 21 22:23:13 2004
From: users@opengroupware.org (Helge Hess)
Date: Wed, 21 Apr 2004 23:23:13 +0200
Subject: [OGo-Users] confirmation only
In-Reply-To: <200404211023.57194.chris123@magma.ca>
References: <200404211023.57194.chris123@magma.ca>
Message-ID: <18F9120B-93DA-11D8-AE1D-000393C29C2A@opengroupware.org>

On 21.04.2004, at 16:23, chris h wrote:
> A few weeks back an OGo update produced new entries in the root 
> account.
> Specifically, Config admin and Cyrus Admin. As I have not been able to 
> get these to work, (Cyrus Admin in fact should not work as I use an 
> ISP provided IMAP account at this time for testing with no root 
> access) I was wondering if these new modules are complete and 
> functional or are in progress.

In progress. Do not bother.

Greets,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr 22 04:34:28 2004
From: users@opengroupware.org (Kristjan Koppel)
Date: Thu, 22 Apr 2004 06:34:28 +0300
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <40867478.3040104@intellixx.de>
References: <408656D0.3050809@intellixx.de> <20040421111920.M84629@kraftpost.org> <20040421113213.M85506@kraftpost.org> <408668E8.7050407@intellixx.de> <408670CF.4070906@haberst.ee> <40867478.3040104@intellixx.de>
Message-ID: <40873D44.5050707@haberst.ee>

Unfortunately I have no idea what this error message means.

You could try to access a specific projects documents like this:
http://<server>/zidestore/so/<username>/Projects/<projectcode>/Documents

Also check that you have the latest version of all the opengroupware 
packages.


--
Kristjan


Sebastian Breier wrote:

> Good idea!
>
> But, well, again no luck. But we got more information again! ;)
>
> When accessing http://<server>/zidestore/so/<username>/Projects with
> cadaver, I got this:
>
> --- ZideStore log ---
> Apr 21 13:10:29 ZideStore [2167]: <|Rq:PROPFIND 0x083B8B0C|>D 
> classified as WebDAV by user-agent (it's a DAV client)
> Apr 21 13:10:29 ZideStore [2167]: |SxUserFolder:<username>| ERROR: got 
> no class for personal folder 'Projects': {
>     class = SxProjectsFolder;
>     config = {};
> }
> 192.168.1.1 - - [21/Apr/2004:13:10:29 GMT] "PROPFIND 
> /zidestore/so/<username>/Projects/ HTTP/1.0" 404 35 0.008 - - 0
>
> --- Cadaver Output ---
> dav:!> open http://<server>/zidestore/so/<username>/Projects
> Authentication required for SKYRiX on server `<server>':
> Username: <username>
> Password:
> Could not access /zidestore/so/<username>/Projects/ (not 
> WebDAV-enabled?):
> 404 Not Found
> Connection to `<server>' closed.
>
> I'll definitely look into this later. Do you have any other suggestions
> which might be helpful?
>
> Thanks,
>     Sebastian.
>
> Kristjan Koppel wrote:
>
>> I had the same problem just recently. You're trying to access 
>> ZideStore with your web browser, right? I don't think it's supposed 
>> to work this way. Try accessing 
>> http://<yourserver>/zidestore/so/<username>/Projects with a WebDAV 
>> client. I got the same error messages in my web browser but it works 
>> fine with Cadaver and OpenOffice.
>>
>> Sebastian Breier wrote:
>>
>>> ogo wrote:
>>>
>>>> hi
>>>> you can also read this:
>>>>
>>>> http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs/
>>>
>>>
>>>
>>>
>>> Okay, thanks so far.
>>>
>>> I think I've seen the /zidestore/so/<username> page already, but it
>>> didn't really help me accessing the project files.
>>>
>>> So, I've read that document above. The document states I should be able
>>> to access a subdirectory within my user directory for the projects, 
>>> called /zidestore/so/<username>/Projects.
>>>
>>> When I access this page, OGo comes back to me with this web site:
>>>
>>> object not found: sb => Projects
>>>
>>> The ZideStore logs tell me this:
>>>
>>> Apr 21 12:17:04 ZideStore [2011]: |SxUserFolder:<username>| ERROR: 
>>> got no class for personal folder 'Projects': {
>>>     class = SxProjectsFolder;
>>>     config = {};
>>> }
>>> Apr 21 12:17:04 ZideStore [2011]: |ZideStore| cannot create 
>>> userfolder, not a login name: 'Projects'
>>> 192.168.1.1 - - [21/Apr/2004:12:17:04 GMT] "GET 
>>> /zidestore/so/<username>/Projects HTTP/1.0" 404 35 0.097 - - 0
>>>
>>> (Of course, <username> was a real username when I tested it ;))
>>>
>>> Any ideas? The log error message looks promising, but I don't know
>>> what's wrong there... Google and searching the mailing list doesn't 
>>> turn
>>> up anything useful.
>>>
>>> Bye,
>>>     Sebastian.
>>
>>
>>
>


From users@opengroupware.org  Thu Apr 22 06:38:40 2004
From: users@opengroupware.org (chris h)
Date: Thu, 22 Apr 2004 01:38:40 -0400
Subject: [OGo-Users] ogo webdav clients
Message-ID: <200404220138.41240.chris123@magma.ca>

The following is a list of webdav clients that I have tested with OGo on 
linux;

Applications			Status

1. cadaver			OK (complete file tree)
2. OpenOffice (linux)	OK (complete file tree) 
3. kde3.2.2		
	Konguorer		failed
	Kate				failed
	open-dialogue		failed

Test URL 	

cadaver	http://localhost/zidestore/so/<user-name>
kde		http://localhost/zidestore/so/<user-name>
		webdav://localhost/zidestore/so/<user-name>
Openoffice	same http:// URL

Was wondering if someone more familliar with KDE's internal could explain what 
the issues are between KDE and OGo. This does not seem to be an issue with 
the same kde app's accessing a zope-server via webdav. It seems to be 
specific to ogo. 

Secondly, those on gnome desktops etc, if you could provide a list of tested 
gnome applications that are webdav enabled that would be very helpful for 
documenting this stuff. 

Finally, those on windows: 98,XP,2K if you could confirm access to OGo via 
webfolder that would be outstanding. With 98 you probably need a separate 
client like webdrive.

 Any input would be greatly appreciated. All data will be uploaded once 
compiled to docs.opengroupware.org

tks

/ch


From users@opengroupware.org  Wed Apr 21 15:08:14 2004
From: users@opengroupware.org (chris h)
Date: Wed, 21 Apr 2004 10:08:14 -0400
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <40867478.3040104@intellixx.de>
References: <408656D0.3050809@intellixx.de> <408670CF.4070906@haberst.ee> <40867478.3040104@intellixx.de>
Message-ID: <200404211008.14147.chris123@magma.ca>

On April 21, 2004 09:17 am, Sebastian Breier wrote:

> --- ZideStore log ---
> Apr 21 13:10:29 ZideStore [2167]: <|Rq:PROPFIND 0x083B8B0C|>D classified
> as WebDAV by user-agent (it's a DAV client)
> Apr 21 13:10:29 ZideStore [2167]: |SxUserFolder:<username>| ERROR: got
> no class for personal folder 'Projects': {
>      class = SxProjectsFolder;
>      config = {};
> }
> 192.168.1.1 - - [21/Apr/2004:13:10:29 GMT] "PROPFIND
> /zidestore/so/<username>/Projects/ HTTP/1.0" 404 35 0.008 - - 0
>
> --- Cadaver Output ---
> dav:!> open http://<server>/zidestore/so/<username>/Projects
> Authentication required for SKYRiX on server `<server>':
> Username: <username>
> Password:
> Could not access /zidestore/so/<username>/Projects/ (not WebDAV-enabled?):
> 404 Not Found
> Connection to `<server>' closed.

OK lets review what the log actually says. The last lines are telling...:)

It cannot connect to the URL provided as Project does not appear to be webdav 
enabled. Why is this? Well usually the case if you create a Project on the 
file system. Only Project created at present in the DB (there is a switch for 
this when you create a Project-file system or DB based) are accessible via 
webdav. Hence there is no connection.

IF you are on linux, always use webdav to test. Its very reliable and the 
error output is very detailed.

HTH's 

/ch

From users@opengroupware.org  Thu Apr 22 10:47:13 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 22 Apr 2004 11:47:13 +0200
Subject: [OGo-Users] ogo webdav clients
In-Reply-To: <200404220138.41240.chris123@magma.ca>
References: <200404220138.41240.chris123@magma.ca>
Message-ID: <083A1A5A-9442-11D8-AE1D-000393C29C2A@opengroupware.org>

On 22.04.2004, at 07:38, chris h wrote:
> 3. kde3.2.2		
> 	Konguorer		failed
> 	Kate				failed
> 	open-dialogue		failed

You only need to test a single KDE client, they all use the same KDE 
WebDAV service ... ;-)
(the same is true for GNOME of course, which always uses GNOME VFS)

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr 22 11:37:09 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 22 Apr 2004 12:37:09 +0200
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <200404211008.14147.chris123@magma.ca>
References: <408656D0.3050809@intellixx.de> <408670CF.4070906@haberst.ee> <40867478.3040104@intellixx.de> <200404211008.14147.chris123@magma.ca>
Message-ID: <020837C5-9449-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 21, 2004, at 4:08 PM, chris h wrote:
> It cannot connect to the URL provided as Project does not appear to be 
> webdav
> enabled.

He queries "/zidestore/so/<username>/Projects/", not a specific 
project. Projects is a folder which contains the projects of a user.

Depending on the client it might help to use "dav" instead of "so" to 
enforce WebDAV access ("so" tries some autodetection based on the user 
agent and some other stuff to determine whether WebDAV is to be used).

> Why is this? Well usually the case if you create a Project on the
> file system. Only Project created at present in the DB (there is a 
> switch for
> this when you create a Project-file system or DB based) are accessible 
> via
> webdav. Hence there is no connection.

This is wrong. You can access both, filesystem and DB projects, with 
ZideStore.

> IF you are on linux, always use webdav to test.
                                   ^^^^^^
I think Chris is referring to the "cadaver" WebDAV client which is very 
good for testing.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Thu Apr 22 11:39:41 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 22 Apr 2004 12:39:41 +0200
Subject: [OGo-Users] DB and Apache  Errors
In-Reply-To: <4086D591.5000404@seekio.com>
References: <4086D591.5000404@seekio.com>
Message-ID: <5CBBF37C-9449-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 21, 2004, at 10:12 PM, Martin R Morales wrote:
>  The DB error I am encountering is::
>  <start>
>  Apr 21 12:56:02 ZideStore [27455]: <0x0876FD54[SxAptManager]> process=20=

> 9 gids ...
>  EXCEPTION: (Exception name:PostgreSQL72FatalError=20
> class:PostgreSQL72Exception reason:fatal pgsql error=20
> (channel=3D<PostgreSQL72Channel[0x08766574] connection=3D0x08766770>):=20=

> ERROR:=A0 syntax error at or near ")" at character 69
>  =A0info:<nil>)
>  <stop>

I don't think I have seen that before, hm. Please open a bugreport in=20
Bugzilla:
   http://bugzilla.opengroupware.org/

You can use "-PGDebugEnabled YES" switch to log the SQL statements=20
generated by OGo. Please attach them to the bugreport.

Thanks,
   Helge
--=20
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Thu Apr 22 16:04:21 2004
From: users@opengroupware.org (Sean Gonsman)
Date: Thu, 22 Apr 2004 11:04:21 -0400
Subject: [OGo-Users] Palm Sync - Erase all/Update all
Message-ID: <4087DEF5.8080806@gonsman.com>

I just synced my palm to Ogo for the first time and I was really excited 
that it worked.  Unfortunately, all of the records are private and only 
for me.  I changed the default (in the preferences) so that the date 
book would use the account "all intranet" and re-synced, but the records 
are still private under my name.  Is there a way to either delete all of 
the palm records in Ogo (so that I can re-sync) or update them all so 
that they are under the account "all intranet"?

-Sean


From users@opengroupware.org  Thu Apr 22 17:30:33 2004
From: users@opengroupware.org (Sebastian Breier)
Date: Thu, 22 Apr 2004 18:30:33 +0200
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <020837C5-9449-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <408656D0.3050809@intellixx.de> <408670CF.4070906@haberst.ee> <40867478.3040104@intellixx.de> <200404211008.14147.chris123@magma.ca> <020837C5-9449-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <4087F329.1060105@intellixx.de>

This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enig9C7FEF048AD8BB6172619D80
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Helge Hess wrote:
> On Apr 21, 2004, at 4:08 PM, chris h wrote:
> 
>> It cannot connect to the URL provided as Project does not appear to be 
>> webdav
>> enabled.
> 
> 
> He queries "/zidestore/so/<username>/Projects/", not a specific project. 
> Projects is a folder which contains the projects of a user.
> 
> Depending on the client it might help to use "dav" instead of "so" to 
> enforce WebDAV access ("so" tries some autodetection based on the user 
> agent and some other stuff to determine whether WebDAV is to be used).

I use cadaver, and I think (from the log) that OGo sees it as dav
client.

>> Why is this? Well usually the case if you create a Project on the
>> file system. Only Project created at present in the DB (there is a 
>> switch for
>> this when you create a Project-file system or DB based) are accessible 
>> via
>> webdav. Hence there is no connection.
> 
> 
> This is wrong. You can access both, filesystem and DB projects, with 
> ZideStore.

Good. I tried to access a project directly using the
/zidestore/so/<username>/Projects/<Name>/Documents URL, but that results
in the same "Projects" directory not being found.

>> IF you are on linux, always use webdav to test.
> 
>                                   ^^^^^^
> I think Chris is referring to the "cadaver" WebDAV client which is very 
> good for testing.

Yeah, I like and use it. :)

Thanks so far,
	Sebastian.

--------------enig9C7FEF048AD8BB6172619D80
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAh/Mtyv1UBXaBXL4RAl2nAJ4hDhnS886W5mzPvDjoz3a0uZtpQwCgzQsV
mcCId9ukNZNF8P035KswcIk=
=Myor
-----END PGP SIGNATURE-----

--------------enig9C7FEF048AD8BB6172619D80--

From users@opengroupware.org  Thu Apr 22 17:53:24 2004
From: users@opengroupware.org (chris h)
Date: Thu, 22 Apr 2004 12:53:24 -0400
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <020837C5-9449-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <408656D0.3050809@intellixx.de> <200404211008.14147.chris123@magma.ca> <020837C5-9449-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <200404221253.25769.chris123@magma.ca>

On April 22, 2004 06:37 am, Helge Hess wrote:


> This is wrong. You can access both, filesystem and DB projects, with
> ZideStore.

Interesting an I dont see this on my test installs...have seen the following 
since inception so simply assumed FS projects are not webdav accessible. 

cadavar;

#Listing collection: ' /zidestore/so/chris123/Projects/FS/': failed:
500 Internal Server Error

rpms; opengroupware 1.0-ogo004, zidestore 1.2-ogo062
 
> > IF you are on linux, always use webdav to test.
>
>                                    ^^^^^^
> I think Chris is referring to the "cadaver" WebDAV client which is very
> good for testing.

yes 

/ch

From users@opengroupware.org  Thu Apr 22 17:58:50 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 22 Apr 2004 18:58:50 +0200
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <40867478.3040104@intellixx.de>
References: <408656D0.3050809@intellixx.de> <20040421111920.M84629@kraftpost.org> <20040421113213.M85506@kraftpost.org> <408668E8.7050407@intellixx.de> <408670CF.4070906@haberst.ee> <40867478.3040104@intellixx.de>
Message-ID: <5435E680-947E-11D8-AE1D-000393C29C2A@opengroupware.org>

On 21.04.2004, at 15:17, Sebastian Breier wrote:
> Apr 21 13:10:29 ZideStore [2167]: |SxUserFolder:<username>| ERROR: got 
> no class for personal folder 'Projects': {

This looks like you do not have the Projects.zsp product installed 
(which results in the SxProjectsFolder class not being found).

Check whether $GNUSTEP_USER_ROOT/Library/ZideStore12/ contains a 
directory called Products.zsp.

If you have it, check whether it is actually loaded, ZideStore prints a 
log like that on startup:
---snip---
Apr 22 17:05:30 ZideStore [3485]: |ZideStore| register ZideStore 
product: Projects.zsp
---snap---

regards,
   Helge
-- 
OpenGroupware.org Fragen? SKYRIX Support!
http://www.skyrix.de/de/produkte/support/techogosupport.php


From users@opengroupware.org  Thu Apr 22 18:06:54 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 22 Apr 2004 19:06:54 +0200
Subject: [OGo-Users] Problem with ZideStore
In-Reply-To: <200404221253.25769.chris123@magma.ca>
References: <408656D0.3050809@intellixx.de> <200404211008.14147.chris123@magma.ca> <020837C5-9449-11D8-8F9A-000393BBAFF6@opengroupware.org> <200404221253.25769.chris123@magma.ca>
Message-ID: <74967891-947F-11D8-AE1D-000393C29C2A@opengroupware.org>

On 22.04.2004, at 18:53, chris h wrote:
> #Listing collection: ' /zidestore/so/chris123/Projects/FS/': failed:
> 500 Internal Server Error

Please start ZideStore with "-WOHttpAdaptor_LogStream YES" to see 
whether the 500 response contains some more information.

ZideStore definitely works with FS project, just tried that.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr 22 18:08:55 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Thu, 22 Apr 2004 19:08:55 +0200
Subject: [OGo-Users] default language
Message-ID: <008701c4288c$7ec552d0$8f3bc781@hermes>

hello,
how do i set french as being the default language for ogo ?
regards
_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Thu Apr 22 18:28:23 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 22 Apr 2004 19:28:23 +0200
Subject: [OGo-Users] ogo webdav clients
In-Reply-To: <200404220138.41240.chris123@magma.ca>
References: <200404220138.41240.chris123@magma.ca>
Message-ID: <7527BBFD-9482-11D8-AE1D-000393C29C2A@opengroupware.org>

Hi,

update: I think I fixed OGo bug #710:

   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=710

which had problems with both, Cadaver as well as Konqueror.

On 22.04.2004, at 07:38, chris h wrote:
> 3. kde3.2.2		
> 	Konguorer		failed
> 	Kate				failed
> 	open-dialogue		failed

4. kde3.1.4
Konqueror - OK (complete file tree)

Prior the #710 fix it also worked, but didn't show all files (like 
Cadaver).

> Finally, those on windows: 98,XP,2K if you could confirm access to OGo 
> via webfolder that would be outstanding. With 98 you probably need a 
> separate client like webdrive.

98 and 2k use the so called "WebFolders" which come with IE 5. Note 
that this actually doesn't allow you to mount a WebDAV folder as a 
regular drive. This implies that applications must support WebFolders, 
Office 2000 for example does (it can open files from a webfolder).
If you want to open directly from arbitary applications on 98 or 2k, 
you need additional software like webdrive.

AFAIK on XP you can actually mount a WebDAV URL as a Windows volume for 
all application (just like with webdrive), but I never tried that.

BTW: AFAIK WebFolders also support offline operation? Not sure whether 
this works, but this would be pretty cool.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Thu Apr 22 19:15:48 2004
From: users@opengroupware.org (dbf)
Date: Thu, 22 Apr 2004 19:15:48 +0100
Subject: [OGo-Users] Upgrading OGO
Message-ID: <468D78E4EE5C6A4093A4C00F29DF513D06FF8CA9@VS2.hdi.tvcabo>

Hi all,

We are using Ogo for a few months and we are quite happy with it :)
Thanks guys.

Now we would like to upgrade Ogo to fix some of the bugs that had been =
fixed during the last months. We have installed one Ogo release from the =
end of Dezember.

Pherhaps this is a stupid question but i=B4m afraid of messing up my =
current Ogo instalation that as been working quite well.

Our questions are :

Is just download the latest rpm-all-latest.tar and rpm -uhv all the new =
packages.

Where there any database changes ?
If so, upgrading will cause any problem ?
Must we upgrade all packages ?

I=B4ve been searching in the mailing lists and i haven=B4t found =
anything specific about upgrading, if this is already aswered i=B4m =
sorry.

Best Regards,
Nuno Ferreira

From users@opengroupware.org  Thu Apr 22 20:14:52 2004
From: users@opengroupware.org (Kelley G)
Date: Thu, 22 Apr 2004 12:14:52 -0700
Subject: [OGo-Users] Upgrading OGO
In-Reply-To: <468D78E4EE5C6A4093A4C00F29DF513D06FF8CA9@VS2.hdi.tvcabo>
References: <468D78E4EE5C6A4093A4C00F29DF513D06FF8CA9@VS2.hdi.tvcabo>
Message-ID: <408819AC.1080308@toasterz.com>

dbf wrote:

>Hi all,
>
>We are using Ogo for a few months and we are quite happy with it :)
>Thanks guys.
>
>Now we would like to upgrade Ogo to fix some of the bugs that had been fixed during the last months. We have installed one Ogo release from the end of Dezember.
>
>Pherhaps this is a stupid question but i´m afraid of messing up my current Ogo instalation that as been working quite well.
>
>Our questions are :
>
>Is just download the latest rpm-all-latest.tar and rpm -uhv all the new packages.
>
>Where there any database changes ?
>If so, upgrading will cause any problem ?
>Must we upgrade all packages ?
>
>I´ve been searching in the mailing lists and i haven´t found anything specific about upgrading, if this is already aswered i´m sorry.
>
>Best Regards,
>Nuno Ferreira
>  
>
you may need to update your db schema
here's a doc from the lists.
http://toasterz.com/ogo/docs/update_schema.html
enjoy.

-- 

kelley g

oooooooooooooooooooooooooo
http://toasterz.com
http://exchangekiller.com
oooooooooooooooooooooooooo


From users@opengroupware.org  Thu Apr 22 22:40:06 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Thu, 22 Apr 2004 18:40:06 -0300
Subject: [OGo-Users] DB projects and FS projects
Message-ID: <c69dsd$las$1@sea.gmane.org>

Hello,
The differences of projects that are stored into the filesystem or in 
the database are important when it comes to handle the documents. Also 
once a project is defined in one of the options above, it can't be 
chaged later. Right?

So is there a way to know if a project was defined in the DB or FS? 
AFAIK only if  the tabsheets inside a project document shows Versions, 
Log and permissions, then it is a db project.

If the tabsheet Atributes could show that explicitely....

Also, the tabsheet Documents in the Projects application shows fields 
for a search on documents based on title, filename and extenson. Is this 
search restricted to DB projects?

Olivier


From users@opengroupware.org  Fri Apr 23 00:00:30 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 23 Apr 2004 01:00:30 +0200
Subject: [OGo-Users] DB projects and FS projects
In-Reply-To: <c69dsd$las$1@sea.gmane.org>
References: <c69dsd$las$1@sea.gmane.org>
Message-ID: <DA57C290-94B0-11D8-AE1D-000393C29C2A@opengroupware.org>

On 22.04.2004, at 23:40, Olivier Hallot wrote:
> The differences of projects that are stored into the filesystem or in 
> the database are important when it comes to handle the documents.

Yes.

> Also once a project is defined in one of the options above, it can't 
> be chaged later. Right?

You can dump a FS project using skyprojectexporter and load it into a 
DB project using skyprojectimporter.
Well, to be true I'm not 100% sure whether skyprojectexporter works on 
FS projects, but it should.

You can't change the type in the WebUI.

> So is there a way to know if a project was defined in the DB or FS? 
> AFAIK only if  the tabsheets inside a project document shows Versions, 
> Log and permissions, then it is a db project.

Yes, you only see that from the available capabilities. And after all 
the capabilities is why you would choose one or the other ;-)

> If the tabsheet Atributes could show that explicitely....

That should not be difficult, feel free to add an enh-request so that 
the wish doesn't get lost.
But I'm not sure what the practical value of that feature is as the 
user cares about capabilities, not technology.

> Also, the tabsheet Documents in the Projects application shows fields 
> for a search on documents based on title, filename and extenson. Is 
> this search restricted to DB projects?

Good question. Yes, I think so (only DB). Maybe just give it a try and 
let us know?

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Fri Apr 23 02:32:35 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Thu, 22 Apr 2004 22:32:35 -0300
Subject: [OGo-Users] Re: DB projects and FS projects
In-Reply-To: <DA57C290-94B0-11D8-AE1D-000393C29C2A@opengroupware.org>
References: <c69dsd$las$1@sea.gmane.org> <DA57C290-94B0-11D8-AE1D-000393C29C2A@opengroupware.org>
Message-ID: <c69rn6$n10$1@sea.gmane.org>

Helge Hess wrote:
> On 22.04.2004, at 23:40, Olivier Hallot wrote:
> 
>> The differences of projects that are stored into the filesystem or in 
>> the database are important when it comes to handle the documents.
> 
> 
> Yes.
> 
>> Also once a project is defined in one of the options above, it can't 
>> be chaged later. Right?
> 
> 
> You can dump a FS project using skyprojectexporter and load it into a DB 
> project using skyprojectimporter.
> Well, to be true I'm not 100% sure whether skyprojectexporter works on 
> FS projects, but it should.

Will try and I hope frankly it will, otherwise I foresee troubles.

> 
> You can't change the type in the WebUI.

I know. there is no such option anymore in project attributes editor.

> 
>> So is there a way to know if a project was defined in the DB or FS? 
>> AFAIK only if  the tabsheets inside a project document shows Versions, 
>> Log and permissions, then it is a db project.
> 
> 
> Yes, you only see that from the available capabilities. And after all 
> the capabilities is why you would choose one or the other ;-)
> 
>> If the tabsheet Atributes could show that explicitely....
> 
> 
> That should not be difficult, feel free to add an enh-request so that 
> the wish doesn't get lost.

Will do...

> But I'm not sure what the practical value of that feature is as the user 
> cares about capabilities, not technology.

Allow me to disagree: the user must be warned that the Document search 
in application Projects will not return files if the project stores 
files in filesystem This is a relevant issue he must know before 
creating the project.

> 
>> Also, the tabsheet Documents in the Projects application shows fields 
>> for a search on documents based on title, filename and extenson. Is 
>> this search restricted to DB projects?
> 
> 
> Good question. Yes, I think so (only DB). Maybe just give it a try and 
> let us know?

Pretty confident now that it is. Just create 2 projects, say FS and DB, 
with the same documents and perform a Document search. Only DB will 
return its contents.
> 
> Greets
>   Helge

Regards,
Olivier


From users@opengroupware.org  Fri Apr 23 08:27:27 2004
From: users@opengroupware.org (Bahia Zitouni)
Date: Fri, 23 Apr 2004 11:27:27 +0400
Subject: [OGo-Users] Upgrading OGO
In-Reply-To: <408819AC.1080308@toasterz.com>
Message-ID: <0HWM00BZA4PMF6@apmail3.emirates.net.ae>

Sorry for this question but how can i unsubscribe from this mailing list.

Thank you
Bahia



From users@opengroupware.org  Fri Apr 23 08:56:08 2004
From: users@opengroupware.org (Roland Plugge)
Date: Fri, 23 Apr 2004 09:56:08 +0200
Subject: [OGo-Users] ogo login automatically
Message-ID: <00d401c42908$703adec0$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_00D1_01C42919.3395E800
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Please anyone....

I'm pretty sure automatic login won't be too hard to accomplish (see =
below).
All I want is users to be able to click a button or photo in order to =
login, without the need to enter a username.

Thx,

Roland
  ----- Original Message -----=20
  From: Roland Plugge=20
  To: users@opengroupware.org=20
  Sent: Wednesday, April 14, 2004 10:35 AM
  Subject: ogo login automatically


  Is there another way to login into ogo by either

  1. supplying a list of available users on the login page (buttons or =
picklist). Entering a password isn't strictly neccessary. I don't mind =
building the list manually by entering the usernames into the =
html-template.

  2. typing a username into the url (after the ? e.g.) so ogo =
automatically logs in (by using DirectAction or so???)

  Regards,

  Roland Plugge
------=_NextPart_000_00D1_01C42919.3395E800
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Please anyone....</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I'm pretty sure automatic login won't =
be too hard=20
to accomplish (see below).</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>All I want is users to be able to click =
a button or=20
photo in&nbsp;order to login, without the need to enter a =
username.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Thx,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Roland</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Doog@four-elements.nl =
href=3D"mailto:oog@four-elements.nl">Roland=20
  Plugge</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dusers@opengroupware.org=20
  href=3D"mailto:users@opengroupware.org">users@opengroupware.org</A> =
</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Wednesday, April 14, 2004 =
10:35=20
  AM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> ogo login =
automatically</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=3DArial size=3D2>Is there another way to login into =
ogo by=20
  either</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>1. supplying a list of available =
users on the=20
  login page (buttons or picklist). Entering a password isn't strictly=20
  neccessary. I don't mind building the list manually by entering the =
usernames=20
  into the html-template.</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>2. typing a username into the url =
(after the ?=20
  e.g.) so ogo automatically logs in (by using DirectAction or=20
  so???)</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>Roland=20
Plugge</FONT></DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_00D1_01C42919.3395E800--


From users@opengroupware.org  Fri Apr 23 09:39:26 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 23 Apr 2004 10:39:26 +0200
Subject: [OGo-Users] Re: DB projects and FS projects
In-Reply-To: <c69rn6$n10$1@sea.gmane.org>
References: <c69dsd$las$1@sea.gmane.org> <DA57C290-94B0-11D8-AE1D-000393C29C2A@opengroupware.org> <c69rn6$n10$1@sea.gmane.org>
Message-ID: <BADB0899-9501-11D8-AE1D-000393C29C2A@opengroupware.org>

On 23.04.2004, at 03:32, Olivier Hallot wrote:
>> You can't change the type in the WebUI.
> I know. there is no such option anymore in project attributes editor.

There never was such an option, because this isn't just an "option". 
All the documents are simply located in a very different place. So 
"changing" the type would be a complete dump/load operation.

This would be more likely implemented as

   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=121

(template projects, which is basically making a copy of an existing 
project)

>> But I'm not sure what the practical value of that feature is as the 
>> user cares about capabilities, not technology.
> Allow me to disagree: the user must be warned that the Document search 
> in application Projects will not return files if the project stores 
> files in filesystem This is a relevant issue he must know before 
> creating the project.

This is a creation time issue, not a runtime issue, but OK. Maybe the 
search could also explicitly state that it only searches DB projects 
(=> Enh Bug)

>>> Also, the tabsheet Documents in the Projects application shows 
>>> fields for a search on documents based on title, filename and 
>>> extenson. Is this search restricted to DB projects?
>> Good question. Yes, I think so (only DB). Maybe just give it a try 
>> and let us know?
> Pretty confident now that it is. Just create 2 projects, say FS and 
> DB, with the same documents and perform a Document search. Only DB 
> will return its contents.

Well, I'm not surprised because the search probably accesses the 
document metadata SQL table do perform fast searches over all projects.


Anyway, if you do not care about the speed hit and prefer simplicity 
instead, you could also just remove the support for FS projects and 
only work with DB ones (or the other way around).
Providing more options always results in more complicated UI ...

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Fri Apr 23 13:14:15 2004
From: users@opengroupware.org (Roland Plugge)
Date: Fri, 23 Apr 2004 14:14:15 +0200
Subject: [OGo-Users] deleting user template
Message-ID: <00e901c4292c$7eb00060$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_00E6_01C4293D.4204C810
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

How can I delete a user template?

There's no delete button available while editing the template; this =
button is only available while editing a user.

Regards,

Roland
------=_NextPart_000_00E6_01C4293D.4204C810
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>How can I delete a user =
template?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>There's no delete button available =
while editing=20
the template; this button is only available while editing a =
user.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Roland</FONT></DIV></BODY></HTML>

------=_NextPart_000_00E6_01C4293D.4204C810--


From users@opengroupware.org  Fri Apr 23 13:33:41 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Fri, 23 Apr 2004 14:33:41 +0200
Subject: [OGo-Users] default language
References: <008701c4288c$7ec552d0$8f3bc781@hermes>
Message-ID: <006101c4292f$35f559d0$8f3bc781@hermes>

so, i answer back to my own question :
to set french or any other language as the default language, there are some
possibilities :
create a 'french_template' user and use it to create your users.

it may be necessary to translate the login page as it is a static page (i
think helge documented that on the doc plone )

i tried to change the defaults with :
# su - opengroupware
# Defaults write NSGlobalDomain Languages '( French )'

but i dont exactly know what it did ...
any idea?
it seems It didnt break anything ...
Regards

----- Original Message ----- 
From: "éric le hénaff" <eric.le.henaff@ens.fr>
To: <users@opengroupware.org>
Sent: Thursday, April 22, 2004 7:08 PM
Subject: [OGo-Users] default language


> hello,
> how do i set french as being the default language for ogo ?
> regards
> _____________________________________
>
> Eric LE HENAFF
> Informaticien
> Centre de Ressources Informatiques
> Ecole Normale Supérieure
> Paris
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Fri Apr 23 14:15:51 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Fri, 23 Apr 2004 15:15:51 +0200
Subject: [OGo-Users] skyaptnotify
Message-ID: <008001c42935$199ecea0$8f3bc781@hermes>

hello list,

i installed skyaptnotify as said in the excellent document of the kalamazoo
lug :

Notify

$ su - opengroupware

$ Defaults write skyaptnotify AptNotifyFromAddress '"ogo@whitemice.org"'

$ Defaults write skyaptnotify AptNotifySkyrixUser root

$ Defaults write skyaptnotify AptNotifySkyrixPassword ******

The generation of reminder/notification e-mails is handled by

the skyaptnotify tool, which should be executed by cron on a

periodic basis.

/etc/crontab

*/5 * * * * root su - opengroupware -c "~/Tools/ix86/linuxgnu/

gnu-fd-nil/skyaptnotify" >> /var/log/ogo.log 2>&1



but the next time skyaptnotify run, i got this message in the log :

Apr 23 13:15:02 skyaptnotify [25953]: Note: PostgreSQL72 adaptor using
timezone 'GMT' as default
Could not open file for writing /opt/skyrix/skyrix41/logs/sent-resources: No
such file or directory

How do i change the sent-ressources directory ? i cant find it on the docs
plone.
ELH

_____________________________________

Eric LE HENAFF
Informaticien
Centre de Ressources Informatiques
Ecole Normale Supérieure
Paris


From users@opengroupware.org  Fri Apr 23 14:45:23 2004
From: users@opengroupware.org (John Gray)
Date: Fri, 23 Apr 2004 09:45:23 -0400
Subject: [OGo-Users] Mozilla Calendar..
Message-ID: <40891DF3.1080700@agora-net.com>

Hi,

I read in the archives that I need zidestore to view a calendar via the 
mozilla calendar and that I want a url in the form 
http://<server>/zidestore/so/<user>

Is there something more I need to do to configure zidestore?

I get:

object not found: gray

where gray is the user.

Thanks,

John

-- 
John Gray                           gray@agora-net.com
AgoraNet, Inc.                      (302) 224-2475
102 E. Main Street, Suite 303       (302) 224-2552 (fax)
Newark, De 19711                    http://www.agora-net.com


From users@opengroupware.org  Fri Apr 23 14:53:54 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 23 Apr 2004 15:53:54 +0200
Subject: [OGo-Users] Mozilla Calendar..
In-Reply-To: <40891DF3.1080700@agora-net.com>
References: <40891DF3.1080700@agora-net.com>
Message-ID: <A8C627D8-952D-11D8-AE1D-000393C29C2A@opengroupware.org>

On 23.04.2004, at 15:45, John Gray wrote:
> I read in the archives that I need zidestore to view a calendar via 
> the mozilla calendar and that I want a url in the form 
> http://<server>/zidestore/so/<user>

You can find valid URLs here:
   http://docs.opengroupware.org/Members/helge/ZideStore/ZideStore-URLs/

> object not found: gray

Well, check the logfiles. But just <user> is no valid URL anyway.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Fri Apr 23 15:49:57 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Fri, 23 Apr 2004 16:49:57 +0200
Subject: [OGo-Users] skyaptnotify
References: <008001c42935$199ecea0$8f3bc781@hermes>
Message-ID: <00de01c42942$3f1f4210$8f3bc781@hermes>

answering my question.
i had to do :
# mkdir -p /opt/skyrix/skyrix41/logs/
# touch sent-ressources
# chown -R opengroupware.skyrix /opt/skyrix/
no more erros in the log file now.

----- Original Message ----- 
From: "éric le hénaff" <eric.le.henaff@ens.fr>
To: <users@opengroupware.org>
Sent: Friday, April 23, 2004 3:15 PM
Subject: [OGo-Users] skyaptnotify


> hello list,
>
> i installed skyaptnotify as said in the excellent document of the
kalamazoo
> lug :
>
> Notify
>
> $ su - opengroupware
>
> $ Defaults write skyaptnotify AptNotifyFromAddress '"ogo@whitemice.org"'
>
> $ Defaults write skyaptnotify AptNotifySkyrixUser root
>
> $ Defaults write skyaptnotify AptNotifySkyrixPassword ******
>
> The generation of reminder/notification e-mails is handled by
>
> the skyaptnotify tool, which should be executed by cron on a
>
> periodic basis.
>
> /etc/crontab
>
> */5 * * * * root su - opengroupware -c "~/Tools/ix86/linuxgnu/
>
> gnu-fd-nil/skyaptnotify" >> /var/log/ogo.log 2>&1
>
>
>
> but the next time skyaptnotify run, i got this message in the log :
>
> Apr 23 13:15:02 skyaptnotify [25953]: Note: PostgreSQL72 adaptor using
> timezone 'GMT' as default
> Could not open file for writing /opt/skyrix/skyrix41/logs/sent-resources:
No
> such file or directory
>
> How do i change the sent-ressources directory ? i cant find it on the docs
> plone.
> ELH
>
> _____________________________________
>
> Eric LE HENAFF
> Informaticien
> Centre de Ressources Informatiques
> Ecole Normale Supérieure
> Paris
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Fri Apr 23 15:51:17 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Fri, 23 Apr 2004 11:51:17 -0300
Subject: [OGo-Users] Re: default language
In-Reply-To: <006101c4292f$35f559d0$8f3bc781@hermes>
References: <008701c4288c$7ec552d0$8f3bc781@hermes> <006101c4292f$35f559d0$8f3bc781@hermes>
Message-ID: <c6bagp$7ed$1@sea.gmane.org>

If you want just ONE login page no matter what language your browser 
uses, edit

/opt/skyrix/system/Libraries/Resources/NGObjWeb/Languages.plist

and map every possible language there to 'French'. That way an alien 
browser will not trigger the english login page (I am not sure this is 
the smarter way to obliterate this browser x language coupling, but it 
works.)

Then create a French.lproj directory in

/opt/opengroupware.org/WOApps/OpenGroupware.woa/Main.wo/

where you can get Main.html and Main.wod from English.lproj. Edit your 
Main.wod, search for "Username" and "Password" and translate to French. 
You may want to look into Main.html and translate the contents there as 
well.

Olivier

éric le hénaff wrote:
> 
>>hello,
>>how do i set french as being the default language for ogo ?
>>regards
>>_____________________________________
>>
>>Eric LE HENAFF
>>Informaticien
>>Centre de Ressources Informatiques
>>Ecole Normale Supérieure
>>Paris
>>
>>-- 
>>OpenGroupware.org Users
>>users@opengroupware.org
>>http://mail.opengroupware.org/mailman/listinfo/users
>>
> 
> 


From users@opengroupware.org  Fri Apr 23 16:07:07 2004
From: users@opengroupware.org (Marco Marongiu)
Date: Fri, 23 Apr 2004 17:07:07 +0200
Subject: [OGo-Users] skyaptnotify
In-Reply-To: <008001c42935$199ecea0$8f3bc781@hermes>
References: <008001c42935$199ecea0$8f3bc781@hermes>
Message-ID: <4089311B.7080607@tiscali.com>

This is a multi-part message in MIME format.
--------------050806030309030303050105
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 8bit



éric le hénaff wrote:
> but the next time skyaptnotify run, i got this message in the log :
> 
> Apr 23 13:15:02 skyaptnotify [25953]: Note: PostgreSQL72 adaptor using
> timezone 'GMT' as default
> Could not open file for writing /opt/skyrix/skyrix41/logs/sent-resources: No
> such file or directory
> 
> How do i change the sent-ressources directory ? i cant find it on the docs
> plone.

Helge just answered to the very same question a couple of days ago

Ciao
--bronto

-- 
Marco Marongiu - Int. IT Services      _|_  []              _   []
Email: mmarongiu@tiscali.com            |   _   __  __  __   |  _
Phone: +39 070 460 1684                 |    |  \  /    __|  |   |   _
Fax:   +39 070 460 9684                 |_| _|_ _\ \__ [__| _|_ _|_ [_]

--------------050806030309030303050105
Content-Type: message/rfc822;
 name="Attached Message"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="Attached Message"

Received: from mail.tiscali.com ([195.130.225.26]) by corp-mail.tiscali.com with Microsoft SMTPSVC(5.0.2195.6713);
	 Tue, 20 Apr 2004 11:00:49 +0200
Received: (qmail 8244 invoked by uid 1009); 20 Apr 2004 09:00:50 -0000
Delivered-To: tiscali.com-bronto@tiscali.com
Received: (qmail 8241 invoked by uid 0); 20 Apr 2004 09:00:50 -0000
Received: from unknown (HELO mailr-2a.tiscali.it) (195.130.225.137)
  by mail.tiscali.com with SMTP; 20 Apr 2004 09:00:50 -0000
Received: from mail.opengroupware.org (213.211.192.141)
  by mailr-2a.tiscali.it with ESMTP; 20 Apr 2004 11:00:50 +0200
X-BrightmailFiltered: true
Received: from localhost (mail.opengroupware.org [213.211.192.141])
	by mail.opengroupware.org (mail) with ESMTP
	id B9F673CE71B; Tue, 20 Apr 2004 11:01:04 +0200 (CEST)
Received: from mail.opengroupware.org ([213.211.192.141])
	by localhost (mail [213.211.192.141]) (amavisd-new, port 10024)
	with ESMTP id 01809-04; Tue, 20 Apr 2004 11:01:04 +0200 (CEST)
Received: from mail.opengroupware.org (localhost [127.0.0.1])
	by mail.opengroupware.org (mail) with ESMTP
	id 3AD7E3CE25C; Tue, 20 Apr 2004 11:01:03 +0200 (CEST)
Delivered-To: users@opengroupware.org
Received: from localhost (mail.opengroupware.org [213.211.192.141])
	by mail.opengroupware.org (mail) with ESMTP id BFB923CE25B
	for <users@opengroupware.org>; Tue, 20 Apr 2004 11:00:11 +0200 (CEST)
Received: from mail.opengroupware.org ([213.211.192.141])
	by localhost (mail [213.211.192.141]) (amavisd-new, port 10024)
	with ESMTP id 32078-05 for <users@opengroupware.org>;
	Tue, 20 Apr 2004 11:00:11 +0200 (CEST)
Received: from corp-mail.tiscali.com (host-213-205-15-167.tiscali.it [213.205.15.167])
	by mail.opengroupware.org (mail) with ESMTP id 177283CE258
	for <users@opengroupware.org>; Tue, 20 Apr 2004 11:00:11 +0200 (CEST)
Received: from tiscali.com ([10.39.253.107]) by corp-mail.tiscali.com with Microsoft SMTPSVC(5.0.2195.6713);
	 Tue, 20 Apr 2004 10:59:46 +0200
Message-ID: <4084E682.4040007@tiscali.com>
From: Marco Marongiu <bronto@tiscali.com>
Organization: Tiscali S.p.A.
User-Agent: Mozilla/5.0 (X11; U; Linux i686; it-IT; rv:1.6) Gecko/20040113
X-Accept-Language: en-us, en
MIME-Version: 1.0
To: users@opengroupware.org
Subject: Re: [OGo-Users] About bug 108 (Skyaptnotify logs to /opt/skyrix/skyrix41/logs/sent-resources
 by default on Debian)
References: <40838C4F.70905@tiscali.com> <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>
In-Reply-To: <523455DE-91EA-11D8-8F9A-000393BBAFF6@opengroupware.org>
X-Enigmail-Version: 0.83.0.0
X-Enigmail-Supports: pgp-inline, pgp-mime
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
X-OriginalArrivalTime: 20 Apr 2004 08:59:46.0812 (UTC) FILETIME=[D46DD3C0:01C426B5]
X-Virus-Scanned: by amavisd-new-20030616-p5 (Debian) at opengroupware.org
Sender: users-admin@opengroupware.org
Errors-To: users-admin@opengroupware.org
X-BeenThere: users@opengroupware.org
X-Mailman-Version: 2.0.11
Precedence: bulk
Reply-To: users@opengroupware.org
List-Help: <mailto:users-request@opengroupware.org?subject=help>
List-Post: <mailto:users@opengroupware.org>
List-Subscribe: <http://mail.opengroupware.org/mailman/listinfo/users>,
	<mailto:users-request@opengroupware.org?subject=subscribe>
List-Id: User Support <users.opengroupware.org>
List-Unsubscribe: <http://mail.opengroupware.org/mailman/listinfo/users>,
	<mailto:users-request@opengroupware.org?subject=unsubscribe>
List-Archive: <http://mail.opengroupware.org/pipermail/users/>
Date: Tue, 20 Apr 2004 10:59:46 +0200
X-Virus-Scanned: by amavisd-new-20030616-p5 (Debian) at opengroupware.org
Return-Path: users-admin@opengroupware.org



Helge Hess wrote:
> On Apr 19, 2004, at 10:22 AM, Marco Marongiu wrote:
> 
>> I am trying to set up aptnotify on debian and I hit this bug. I also 
>> tried to set up the Default AptNotifySentResources, but the behaviour 
>> didn't change.
> 
> 
> The default is called "AptNotifySentResourcesFile".

That works, thank you!!!

Ciao
--Marco
-- 
OpenGroupware.org Users
users@opengroupware.org
http://mail.opengroupware.org/mailman/listinfo/users

--------------050806030309030303050105--

From users@opengroupware.org  Fri Apr 23 16:11:52 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Fri, 23 Apr 2004 17:11:52 +0200
Subject: [OGo-Users] Re: default language
References: <008701c4288c$7ec552d0$8f3bc781@hermes> <006101c4292f$35f559d0$8f3bc781@hermes> <c6bagp$7ed$1@sea.gmane.org>
Message-ID: <010801c42945$4ea9a740$8f3bc781@hermes>

i only created a French.lproj from the English.Lproj then i translated it.
a login page in french shows up now.
and it means a lot for me (great)...

----- Original Message ----- 
From: "Olivier Hallot" <olivier@ig.com.br>
To: <users@opengroupware.org>
Sent: Friday, April 23, 2004 4:51 PM
Subject: [OGo-Users] Re: default language


>
> If you want just ONE login page no matter what language your browser
> uses, edit
>
> /opt/skyrix/system/Libraries/Resources/NGObjWeb/Languages.plist
>
> and map every possible language there to 'French'. That way an alien
> browser will not trigger the english login page (I am not sure this is
> the smarter way to obliterate this browser x language coupling, but it
> works.)
>
> Then create a French.lproj directory in
>
> /opt/opengroupware.org/WOApps/OpenGroupware.woa/Main.wo/
>
> where you can get Main.html and Main.wod from English.lproj. Edit your
> Main.wod, search for "Username" and "Password" and translate to French.
> You may want to look into Main.html and translate the contents there as
> well.
>
> Olivier
>
> éric le hénaff wrote:
> >
> >>hello,
> >>how do i set french as being the default language for ogo ?
> >>regards
> >>_____________________________________
> >>
> >>Eric LE HENAFF
> >>Informaticien
> >>Centre de Ressources Informatiques
> >>Ecole Normale Supérieure
> >>Paris
> >>
> >>-- 
> >>OpenGroupware.org Users
> >>users@opengroupware.org
> >>http://mail.opengroupware.org/mailman/listinfo/users
> >>
> >
> >
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Fri Apr 23 21:43:16 2004
From: users@opengroupware.org (Andreas Hildebrandt)
Date: Fri, 23 Apr 2004 20:43:16 +0000
Subject: [OGo-Users] Overview/calendar.ics
Message-ID: <40897FE4.90002@bioinf.uni-sb.de>

I am not sure if I understand something completely wrong or if I am having a
problem with my opengroupware installation...

If I use a webdav - client to list the content of "Overview" of any 
given user,
I see a list of quite a lot of .ics - files containing all appointments 
in which this
user (or one of "his" groups) participates. Now, I was naive enough to think
that Overview/calendar.ics should somehow contain the content of all 
those files.
Unfortunately it doesn't. It only contains the user's private appointments.
Is this the correct behaviour? If not, how can I fix it? And if it is, 
is there a
way to somehow "merge" together the .ics files in Overview/ so that I can
point my mozilla calendar to this location?

Thanks,

  Andreas Hildebrandt



From users@opengroupware.org  Fri Apr 23 20:19:12 2004
From: users@opengroupware.org (Roland Plugge)
Date: Fri, 23 Apr 2004 21:19:12 +0200
Subject: [OGo-Users] bug??? - deleting user template
References: <00e901c4292c$7eb00060$0100000a@athlon>
Message-ID: <012001c42967$dc2b44d0$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_011D_01C42978.9F81BA30
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I really can't delete a user template..... is this a (known) bug???

What would you recommend?
  ----- Original Message -----=20
  From: Roland Plugge=20
  To: users@opengroupware.org=20
  Sent: Friday, April 23, 2004 2:14 PM
  Subject: [OGo-Users] deleting user template


  How can I delete a user template?

  There's no delete button available while editing the template; this =
button is only available while editing a user.

  Regards,

  Roland
------=_NextPart_000_011D_01C42978.9F81BA30
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I really can't delete a user =
template..... is this=20
a (known) bug???</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>What would you recommend?</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Doog@four-elements.nl =
href=3D"mailto:oog@four-elements.nl">Roland=20
  Plugge</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dusers@opengroupware.org=20
  href=3D"mailto:users@opengroupware.org">users@opengroupware.org</A> =
</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Friday, April 23, 2004 =
2:14=20
PM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [OGo-Users] deleting =
user=20
  template</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=3DArial size=3D2>How can I delete a user =
template?</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>There's no delete button available =
while editing=20
  the template; this button is only available while editing a =
user.</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial =
size=3D2>Roland</FONT></DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_011D_01C42978.9F81BA30--


From users@opengroupware.org  Fri Apr 23 21:02:38 2004
From: users@opengroupware.org (Sebastian Breier)
Date: Fri, 23 Apr 2004 22:02:38 +0200
Subject: [OGo-Users] Upgrading OGO
In-Reply-To: <0HWM00BZA4PMF6@apmail3.emirates.net.ae>
References: <0HWM00BZA4PMF6@apmail3.emirates.net.ae>
Message-ID: <4089765E.3090203@intellixx.de>

This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enigAFA811831BBE0066A3CE1C77
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Bahia Zitouni wrote:

> Sorry for this question but how can i unsubscribe from this mailing list.

Send a mail to Users-request@opengroupware.org with the word 'help'
(without quotes) in the subject or body of the mail.

You will get a reply that should tell you what to do.

--------------enigAFA811831BBE0066A3CE1C77
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAiXZhyv1UBXaBXL4RAlS8AJ9rIcAJeXeiTi0urZU+qAfTH/aOHQCfYaoE
WD8x5JRuEpiQL6k0p1bl2xA=
=lcot
-----END PGP SIGNATURE-----

--------------enigAFA811831BBE0066A3CE1C77--

From users@opengroupware.org  Sat Apr 24 22:55:26 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Sat, 24 Apr 2004 18:55:26 -0300
Subject: [OGo-Users] Versioning
Message-ID: <c6eno3$6gv$1@sea.gmane.org>

Hello

I am having fun with OpenOffice editing files in a db-stored project 
thru ZideStore. Each time I save my document, a new version is created 
as indicated by the version tabsheet.So far so good.

Now, how do I get rid of the old versions and stay with the newest copy? 
  I fear this can build up in storage quite fast...

Thanks
Olivier


From users@opengroupware.org  Sun Apr 25 15:11:47 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 25 Apr 2004 16:11:47 +0200
Subject: [OGo-Users] Versioning
In-Reply-To: <c6eno3$6gv$1@sea.gmane.org>
References: <c6eno3$6gv$1@sea.gmane.org>
Message-ID: <7D1749EA-96C2-11D8-9A15-000393C29C2A@opengroupware.org>

On 24.04.2004, at 23:55, Olivier Hallot wrote:
> I am having fun with OpenOffice editing files in a db-stored project 
> thru ZideStore. Each time I save my document, a new version is created 
> as indicated by the version tabsheet.So far so good.

Checkout the document in the WebUI first. This creates a working copy 
of the document, a new version is only created if you release the 
document in the WebUI.

BTW: The effect you are experiencing is even more annoying if you turn 
on autosaving in Word, which creates a new version every x minutes ...

> Now, how do I get rid of the old versions and stay with the newest 
> copy?

Copy the document, delete the old. It might be useful to be able to 
delete versions, but this isn't supported in the moment.

> I fear this can build up in storage quite fast...

Well, storage is really cheap. But OGo will only create a new file for 
a version if the content actually changed.

Creates
   Helge
-- 
http://docs.opengroupware.org/Members/helge
OpenGroupware.org


From users@opengroupware.org  Sun Apr 25 17:13:52 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Sun, 25 Apr 2004 13:13:52 -0300
Subject: [OGo-Users] Project attributes
Message-ID: <c6go3l$j4m$1@sea.gmane.org>

Hello (me again...)

1) While editing the attributes of a file I in a project see a reference to
http://www.skyrix.com/namespaces/project-document:

What these attributes are used for?

2) What the Links tabsheet of the Project/Contact/Enterprise is used 
for? There are reference od "related links" + "type"


Regards,
Olivier


From users@opengroupware.org  Sun Apr 25 18:58:15 2004
From: users@opengroupware.org (Roland Plugge)
Date: Sun, 25 Apr 2004 19:58:15 +0200
Subject: [OGo-Users] Remove account status button
Message-ID: <001101c42aee$e21a3d50$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_000E_01C42AFF.A5553B70
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Problem: I accidently created new users as a new template user. Now I =
can't delete the user templates, since there's no [delete] button =
available. The button [Remove account status] is only available while =
viewing a normal user account.

Any ideas on how to remove a user template?
All I can do now is remove the whole database and create it again.... =
there must be a better way!!!!!!

Thx
  ----- Original Message -----=20
  From: Roland Plugge=20
  To: users@opengroupware.org=20
  Sent: Friday, April 23, 2004 9:19 PM
  Subject: bug??? - deleting user template


  I really can't delete a user template..... is this a (known) bug???

  What would you recommend?
    ----- Original Message -----=20
    From: Roland Plugge=20
    To: users@opengroupware.org=20
    Sent: Friday, April 23, 2004 2:14 PM
    Subject: [OGo-Users] deleting user template


    How can I delete a user template?

    There's no delete button available while editing the template; this =
button is only available while editing a user.

    Regards,

    Roland
------=_NextPart_000_000E_01C42AFF.A5553B70
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Problem: I accidently created new users =
as a new=20
template user. Now I can't delete the user templates, since there's no =
[delete]=20
button available. The button [Remove account status] is only available =
while=20
viewing a normal user account.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Any ideas on how to remove a user=20
template?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>All I can do now is remove the whole =
database and=20
create it again.... there must be a better way!!!!!!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Thx</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Doog@four-elements.nl =
href=3D"mailto:oog@four-elements.nl">Roland=20
  Plugge</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dusers@opengroupware.org=20
  href=3D"mailto:users@opengroupware.org">users@opengroupware.org</A> =
</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Friday, April 23, 2004 =
9:19=20
PM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> bug??? - deleting user =

  template</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=3DArial size=3D2>I really can't delete a user =
template..... is=20
  this a (known) bug???</FONT></DIV>
  <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
  <DIV><FONT face=3DArial size=3D2>What would you =
recommend?</FONT></DIV>
  <BLOCKQUOTE dir=3Dltr=20
  style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
    <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
    <DIV=20
    style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
    <A title=3Doog@four-elements.nl =
href=3D"mailto:oog@four-elements.nl">Roland=20
    Plugge</A> </DIV>
    <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dusers@opengroupware.org=20
    href=3D"mailto:users@opengroupware.org">users@opengroupware.org</A> =
</DIV>
    <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Friday, April 23, 2004 =
2:14=20
    PM</DIV>
    <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [OGo-Users] deleting =
user=20
    template</DIV>
    <DIV><BR></DIV>
    <DIV><FONT face=3DArial size=3D2>How can I delete a user =
template?</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
    <DIV><FONT face=3DArial size=3D2>There's no delete button available =
while=20
    editing the template; this button is only available while editing a=20
    user.</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
    <DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
    <DIV><FONT face=3DArial=20
size=3D2>Roland</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_000E_01C42AFF.A5553B70--


From users@opengroupware.org  Sun Apr 25 19:03:02 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Sun, 25 Apr 2004 15:03:02 -0300
Subject: [OGo-Users] Re: Remove account status button
In-Reply-To: <001101c42aee$e21a3d50$0100000a@athlon>
References: <001101c42aee$e21a3d50$0100000a@athlon>
Message-ID: <c6guga$5ve$1@sea.gmane.org>

Roland Plugge wrote:
> Problem: I accidently created new users as a new template user. Now I 
> can't delete the user templates, since there's no [delete] button 
> available. The button [Remove account status] is only available while 
> viewing a normal user account.
>  
> Any ideas on how to remove a user template?
> All I can do now is remove the whole database and create it again.... 
> there must be a better way!!!!!!
>  
>
There is no way AFAIK to delete template users with the web interface, 
and this is WAD (working as designed).

Olivier


From users@opengroupware.org  Sun Apr 25 19:16:28 2004
From: users@opengroupware.org (Roland Plugge)
Date: Sun, 25 Apr 2004 20:16:28 +0200
Subject: [OGo-Users] Re: Remove account status button
References: <001101c42aee$e21a3d50$0100000a@athlon> <c6guga$5ve$1@sea.gmane.org>
Message-ID: <002501c42af1$6d738a30$0100000a@athlon>

Thanks Olivier,

The way you've said that, I feel there's another way (workaround) to delete
a user template.
Anyhow..... as long as I don't have to drop and create a whole new database
:o(

----- Original Message ----- 
From: "Olivier Hallot" <olivier@ig.com.br>
To: <users@opengroupware.org>
Sent: Sunday, April 25, 2004 8:03 PM
Subject: [OGo-Users] Re: Remove account status button


> Roland Plugge wrote:
> > Problem: I accidently created new users as a new template user. Now I 
> > can't delete the user templates, since there's no [delete] button 
> > available. The button [Remove account status] is only available while 
> > viewing a normal user account.
> >  
> > Any ideas on how to remove a user template?
> > All I can do now is remove the whole database and create it again.... 
> > there must be a better way!!!!!!
> >  
> >
> There is no way AFAIK to delete template users with the web interface, 
> and this is WAD (working as designed).
> 
> Olivier
> 
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
> 

From users@opengroupware.org  Sun Apr 25 20:50:13 2004
From: users@opengroupware.org (Helge Hess)
Date: Sun, 25 Apr 2004 21:50:13 +0200
Subject: [OGo-Users] Remove account status button
In-Reply-To: <001101c42aee$e21a3d50$0100000a@athlon>
References: <001101c42aee$e21a3d50$0100000a@athlon>
Message-ID: <C45743CC-96F1-11D8-A742-00039340AF4A@opengroupware.org>

On 25.04.2004, at 19:58, Roland Plugge wrote:
> Problem: I accidently created new users as a new template user. Now I 
> can't delete the user templates, since there's no [delete] button 
> available. The button [Remove account status] is only available while 
> viewing a normal user account.

Please do not spam the mailing list by asking the same question twice.

Obviously the "remove account status" button is not available on a 
template user, because a template user is not a person.

> Any ideas on how to remove a user template?

As mentioned by Olivier, you can't using the WebUI, and yes, this is by 
design because by deleting template users without care you can break a 
lot of things. (search the archives ...)

> All I can do now is remove the whole database and create it again.... 
> there must be a better way!!!!!!

If you know what you are doing, you can change the is_template 
attribute of the record in question directly in the database.
Something like
   UPDATE person SET is_template=0 WHERE login='xxx';

Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Sun Apr 25 20:57:22 2004
From: users@opengroupware.org (Olivier Hallot)
Date: Sun, 25 Apr 2004 16:57:22 -0300
Subject: [OGo-Users] Re: Remove account status button
In-Reply-To: <002501c42af1$6d738a30$0100000a@athlon>
References: <001101c42aee$e21a3d50$0100000a@athlon> <c6guga$5ve$1@sea.gmane.org> <002501c42af1$6d738a30$0100000a@athlon>
Message-ID: <c6h56o$m7s$1@sea.gmane.org>

Roland Plugge wrote:
> Thanks Olivier,
> 
> The way you've said that, I feel there's another way (workaround) to delete
> a user template.
> Anyhow..... as long as I don't have to drop and create a whole new database
> :o(
> 
:-)
There is always the possibility to use the XML-RPC API, which may have 
features the webUI doesn't have. But I have not checked it with respect 
to templates users.I must admit I had no patience to go thru the docs...

Olivier


From users@opengroupware.org  Mon Apr 26 09:24:00 2004
From: users@opengroupware.org (Florent Manens)
Date: Mon, 26 Apr 2004 10:24:00 +0200
Subject: [OGo-Users] Overview/calendar.ics
In-Reply-To: <40897FE4.90002@bioinf.uni-sb.de>
References: <40897FE4.90002@bioinf.uni-sb.de>
Message-ID: <408CC720.5050606@starxpert.fr>

Andreas Hildebrandt a écrit :
> If I use a webdav - client to list the content of "Overview" of any 
> given user,
> I see a list of quite a lot of .ics - files containing all appointments 
> in which this
> user (or one of "his" groups) participates. Now, I was naive enough to 
> think
> that Overview/calendar.ics should somehow contain the content of all 
> those files.
> Unfortunately it doesn't. It only contains the user's private appointments.
> Is this the correct behaviour? If not, how can I fix it? And if it is, 
> is there a
> way to somehow "merge" together the .ics files in Overview/ so that I can
> point my mozilla calendar to this location?

Same thing here
http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=691

-- 
Florent Manens
www.starxpert.fr

From users@opengroupware.org  Mon Apr 26 11:59:46 2004
From: users@opengroupware.org (Andreas Hildebrandt)
Date: Mon, 26 Apr 2004 10:59:46 +0000
Subject: [OGo-Users] Overview/calendar.ics
In-Reply-To: <408CC720.5050606@starxpert.fr>
References: <40897FE4.90002@bioinf.uni-sb.de> <408CC720.5050606@starxpert.fr>
Message-ID: <408CEBA2.4050306@bioinf.uni-sb.de>

Florent Manens wrote:

> Andreas Hildebrandt a écrit :
>
>> If I use a webdav - client to list the content of "Overview" of any 
>> given user,
>> I see a list of quite a lot of .ics - files containing all 
>> appointments in which this
>> user (or one of "his" groups) participates. Now, I was naive enough 
>> to think
>> that Overview/calendar.ics should somehow contain the content of all 
>> those files.
>> Unfortunately it doesn't. It only contains the user's private 
>> appointments.
>> Is this the correct behaviour? If not, how can I fix it? And if it 
>> is, is there a
>> way to somehow "merge" together the .ics files in Overview/ so that I 
>> can
>> point my mozilla calendar to this location?
>
>
> Same thing here
> http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=691
>
Thanks for the info... I did query bugzilla first but somehow overlooked 
this.
This is exactly the same behaviour I experience. So I can confirm that 
this really
seems to be a bug... ;-)


From users@opengroupware.org  Mon Apr 26 10:13:25 2004
From: users@opengroupware.org (Andrej Tazberik)
Date: Mon, 26 Apr 2004 11:13:25 +0200
Subject: [OGo-Users] aplication terminating and localization
Message-ID: <408CD2B5.7060103@somi.sk>

	Hi,

I have couple of questions related to using OGo. I'm running it at SPARC 
Solaris 9 machine, apache 1.3.29, and builded it from source code.

1.
---
When I logout, application terminates with following message:



Apr 26 08:43:55 OpenGroupware [2151]: session 0867086701408CAF8E 
terminated at 2004-04-26 08:43:55 +0200 ..

Apr 26 08:43:55 OpenGroupware [2151]: <[ow-handler]>D application 
terminates because it refuses new sessions and the active session count 
(0) is below the minimum (1).

192.168.1.10 - - [26/Apr/2004:08:43:55 GMT] "GET 
/OpenGroupware/wo/0867086701408CAF8E/003408cafa100c669b8.0.15.1.17.3.1.21.14 
HTTP/1.1" 200 715 0.401 1636 56% -

Apr 26 08:43:55 OpenGroupware [2151]: adaptor stops application: 
<OpenGroupware[0x0014A7A0]: name=OpenGroupware terminating> ...



Of course, I don't want it to terminate ;-)



2.
---
What are the basic steps if I want to translate OGo to language to which 
is OGo not translated at this time? I really didn't find any usable 
manuals, just information: "localization of the application itself is 
*very* easy". If there is any manual related, please point me to it.

AND - when I insert data in ISO-8859-2 encoding, some charakters are 
displayed incorrectly. Is't OGo problem or should I try to find problem 
in postgresDB?

Thanx for help!

	Andrej

From users@opengroupware.org  Mon Apr 26 10:25:50 2004
From: users@opengroupware.org (=?iso-8859-1?Q?=E9ric_le_h=E9naff?=)
Date: Mon, 26 Apr 2004 11:25:50 +0200
Subject: [OGo-Users] aplication terminating and localization
References: <408CD2B5.7060103@somi.sk>
Message-ID: <004a01c42b70$76e11310$8f3bc781@hermes>

hello,
an option is lacking when u started oGo, it
s  -OGoMinimumActiveSessionCount 0.
U should use  Henrik Holmboe start script to launch oGo.
http://mail.opengroupware.org/pipermail/developer/2003-July/000143.html
ELH
----- Original Message ----- 
From: "Andrej Tazberik" <andrej@somi.sk>
To: <users@opengroupware.org>
Sent: Monday, April 26, 2004 11:13 AM
Subject: [OGo-Users] aplication terminating and localization


> Hi,
>
> I have couple of questions related to using OGo. I'm running it at SPARC
> Solaris 9 machine, apache 1.3.29, and builded it from source code.
>
> 1.
> ---
> When I logout, application terminates with following message:
>
>
>
> Apr 26 08:43:55 OpenGroupware [2151]: session 0867086701408CAF8E
> terminated at 2004-04-26 08:43:55 +0200 ..
>
> Apr 26 08:43:55 OpenGroupware [2151]: <[ow-handler]>D application
> terminates because it refuses new sessions and the active session count
> (0) is below the minimum (1).
>
> 192.168.1.10 - - [26/Apr/2004:08:43:55 GMT] "GET
>
/OpenGroupware/wo/0867086701408CAF8E/003408cafa100c669b8.0.15.1.17.3.1.21.14
> HTTP/1.1" 200 715 0.401 1636 56% -
>
> Apr 26 08:43:55 OpenGroupware [2151]: adaptor stops application:
> <OpenGroupware[0x0014A7A0]: name=OpenGroupware terminating> ...
>
>
>
> Of course, I don't want it to terminate ;-)
>
>
>
> 2.
> ---
> What are the basic steps if I want to translate OGo to language to which
> is OGo not translated at this time? I really didn't find any usable
> manuals, just information: "localization of the application itself is
> *very* easy". If there is any manual related, please point me to it.
>
> AND - when I insert data in ISO-8859-2 encoding, some charakters are
> displayed incorrectly. Is't OGo problem or should I try to find problem
> in postgresDB?
>
> Thanx for help!
>
> Andrej
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Mon Apr 26 10:56:42 2004
From: users@opengroupware.org (Helge Hess)
Date: Mon, 26 Apr 2004 11:56:42 +0200
Subject: [OGo-Users] aplication terminating and localization
In-Reply-To: <408CD2B5.7060103@somi.sk>
References: <408CD2B5.7060103@somi.sk>
Message-ID: <04C8FD47-9768-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 26, 2004, at 11:13 AM, Andrej Tazberik wrote:
> When I logout, application terminates with following message:

Please look into the FAQ and search the archives prior posting! You 
need to wrap the OGo binary in a small shell loop wrapper:
   http://www.opengroupware.org/en/users/faq/index.html#install

> What are the basic steps if I want to translate OGo to language to 
> which is OGo not translated at this time?

http://www.opengroupware.org/en/projects/translation/

> AND - when I insert data in ISO-8859-2 encoding, some charakters are 
> displayed incorrectly. Is't OGo problem or should I try to find 
> problem in postgresDB?

You need to wait for this:
   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=135

OGo doesn't support ISO Latin 2. (also see the links in the translation 
project)

Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Mon Apr 26 11:33:16 2004
From: users@opengroupware.org (Andrej Tazberik)
Date: Mon, 26 Apr 2004 12:33:16 +0200
Subject: [OGo-Users] aplication terminating and localization
In-Reply-To: <04C8FD47-9768-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <408CD2B5.7060103@somi.sk> <04C8FD47-9768-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <408CE56C.7060406@somi.sk>

Helge Hess wrote:
> 
> Please look into the FAQ and search the archives prior posting! 

I'm sorry for this ...

> You need to wait for this:
>   http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=135
> 
> OGo doesn't support ISO Latin 2. (also see the links in the translation 
> project)

Do you know when will be ISO Latin 2 supported by OGo? (not concrete day 
;-) )

Thanx to Helge and Eric le Henaff for answers.

	Andrej

From users@opengroupware.org  Mon Apr 26 17:07:40 2004
From: users@opengroupware.org (dbf)
Date: Mon, 26 Apr 2004 17:07:40 +0100
Subject: [OGo-Users] Bug in Return Receipt ?
Message-ID: <468D78E4EE5C6A4093A4C00F29DF513D06FF8CAA@VS2.hdi.tvcabo>

Hi,

I=B4ve upgraded Ogo release from Dez. to the last one from 24 of April, =
and before this upgrade in Email preferences i=B4had something like this =
in the Return Receipt :

Receipt text :
Your email was opened on :=20
Date : $date$=20
To : $to$=20
Subect : '$subject$'=20

And the sender would receive a message with the info above.

Now, after the upgrade the email with the notification only displays =
this :

Content Type:  	text/plain  	 	 =09
ask

If I change in preferences to auto , the message will display this :

Content Type:  	text/plain  	 	 =09
auto

If I leave the subect empty Ogo will generate an auto title wich still =
work correctly.

Can anyone confirm this, or is something miss configured in my system ?

Best Regards,
Nuno Ferreira

From users@opengroupware.org  Tue Apr 27 20:45:40 2004
From: users@opengroupware.org (Roland Plugge)
Date: Tue, 27 Apr 2004 21:45:40 +0200
Subject: [OGo-Users] IsAccountNewsEditor user right
Message-ID: <012701c42c90$38c71360$0100000a@athlon>

This is a multi-part message in MIME format.

------=_NextPart_000_0124_01C42CA0.FBF73C10
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Obviously editing news items depends on the state of =
IsAccountNewsEditor. Unfortunately I can't find any field/flag related =
with this or other access rights.

How can I set these rights, editing news items in particular?

Cheers,

Roland
------=_NextPart_000_0124_01C42CA0.FBF73C10
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Obviously editing news items depends on =
the state=20
of IsAccountNewsEditor. Unfortunately I can't find any field/flag =
related with=20
this or other access rights.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>How can I set these rights, editing =
news items in=20
particular?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Cheers,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Roland</FONT></DIV></BODY></HTML>

------=_NextPart_000_0124_01C42CA0.FBF73C10--


From users@opengroupware.org  Tue Apr 27 22:06:50 2004
From: users@opengroupware.org (Helge Hess)
Date: Tue, 27 Apr 2004 23:06:50 +0200
Subject: [OGo-Users] IsAccountNewsEditor user right
In-Reply-To: <012701c42c90$38c71360$0100000a@athlon>
References: <012701c42c90$38c71360$0100000a@athlon>
Message-ID: <CD9B6768-988E-11D8-A742-00039340AF4A@opengroupware.org>

On 27.04.2004, at 21:45, Roland Plugge wrote:
> Obviously editing news items depends on the state of=20
> IsAccountNewsEditor. Unfortunately I can't find any field/flag related=20=

> with this or other access rights.
> =A0
> How can I set these rights, editing news items in particular?

All people in the "news editors" team are allowed to edit/create news.=20=

So just use the user manager to add the editors to this group.

regards,
   Helge
--=20
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Tue Apr 27 23:21:18 2004
From: users@opengroupware.org (ravi)
Date: Tue, 27 Apr 2004 18:21:18 -0400
Subject: [OGo-Users] mozilla calendar and ogo/zidestore team calendars
Message-ID: <408EDCDE.3040702@exitleft.org>

hello list!

i use mozilla calendar with opengroupware and i want to implement the below:

a user can subscribe to his/her personal calendar:
http://ogo-host/zidestore/so/<user>/Calendar/calendar.ics

additionally, i want the user to be able to subscribe to team calendars
and other public calendars. for example, let us say i wish to have a
"release" calendar which lists various software release dates. i want
only a few people to be able to update this calendar, but everyone to be
able to subscribe to it, in their mozilla calendar client.

from reading:
http://article.gmane.org/gmane.comp.cms.opengroupware.user/4947
it seems that i should not confuse "teams" in OgO with views. it would
not work, i am guessing, to set up a team called "release" and add a few
users to it (these being the users who can add to the calendar), and
hope that everyone can subscribe to this team's calendar.

perhaps the best way to achieve what i want is to create a user called
"release" and enter all my release dates in that calendar, with the read
group being "all intranet". individual users can then subscribe to the
release calendar using the URL:
http://ogo-host/zidestore/so/release/Calendar/calendar.ics

this would work pretty well in mozilla, but in the web interface, random
user X would see this release calendar dates only if he/she selects "all
intranet" in the view list... there would be no way to say "show me only
the release calendar" (unless you login as user 'release' in the web
interface).

i am an utter newbie, so i am probably missing something here. i would
appreciate any responses. apologies if this is all in a FAQ or in the
archives/docs. i searched as thoroughly as i could, before posting.

	--ravi

From users@opengroupware.org  Tue Apr 27 23:44:53 2004
From: users@opengroupware.org (Ogo@symbio)
Date: Tue, 27 Apr 2004 18:44:53 -0400
Subject: [OGo-Users] Re: Welcome to the "Users" mailing list
In-Reply-To: <20040427223101.12622.81582.Mailman@mail.opengroupware.org>
References: <20040427223101.12622.81582.Mailman@mail.opengroupware.org>
Message-ID: <1083105893.943.10.camel@lts01.nr.symbio.com>

Hello everyone --- I'm new to the list and I probably asking a question
that has been addressed many times over.

Here goes...
So I have a nice clean Fedora (core 1) install up and running.

I am attempting to run the installation via the installation script
'add_remove_ogo.pl' found on http://www.toasterz.com/ogo/

I have tried to run the script without ANY modifications and I get LOTS
of errors.  Too many to post.  After speaking with a person or two that
has done this before, I make a few modifications to both the
'add_remove_ogo.pl' installation file as well as to the 'GNUmakefile'

***Changes to add_remove_ogo.pl***
#system("tar '-xzvf' 'opengroupware.org-mod_ngobjweb-latest.tar.gz'");
(Just commented out the line)


***Changes to GNUmakefile***
Changed this line
#APXS_INCLUDE_DIRS = -I$(shell $(APXS) -q INCLUDEDIR)
to
APXS_INCLUDE_DIRS = -I$(shell $(APXS) -q INCLUDEDIR)-I/usr/include/apr-0


I'm receiving the following error upon installation...
First one:
error: Failed dependencies:
        libcom_err.so.3 is needed by postgresql-server-7.3.3-1PGDG

Second one:
error: Failed dependencies:
        opengroupware-icalsaxdriver is needed by
opengroupware-zidestore-1.2-ogo


I'm not getting anywhere fast after this second error.

Any tips????????

Thanks in advance!

Roger




On Tue, 2004-04-27 at 18:31, users-request@opengroupware.org wrote:
> Welcome to the Users@opengroupware.org mailing list!
> 
> To post to this list, send your email to:
> 
>   users@opengroupware.org
> 
> General information about the mailing list is at:
> 
>   http://mail.opengroupware.org/mailman/listinfo/users
> 
> If you ever want to unsubscribe or change your options (eg, switch to
> or from digest mode, change your password, etc.), visit your
> subscription page at:
> 
>   http://mail.opengroupware.org/mailman/options/users/ogo%40symbio-technologies.com
> 
> 
> You can also make such adjustments via email by sending a message to:
> 
>   Users-request@opengroupware.org
> 
> with the word `help' in the subject or body (don't include the
> quotes), and you will get back a message with instructions.
> 
> You must know your password to change your options (including changing
> the password, itself) or to unsubscribe.  It is:
> 
>   nt4588
> 
> If you forget your password, don't worry, you will receive a monthly
> reminder telling you what all your opengroupware.org mailing list
> passwords are, and how to unsubscribe or change your options.  There
> is also a button on your options page that will email your current
> password to you.
> 
> You may also have your password mailed to you automatically from the
> Web page noted above.
> 
> 


From users@opengroupware.org  Wed Apr 28 07:28:36 2004
From: users@opengroupware.org (Roland Plugge)
Date: Wed, 28 Apr 2004 08:28:36 +0200
Subject: [OGo-Users] IsAccountNewsEditor user right
References: <012701c42c90$38c71360$0100000a@athlon> <CD9B6768-988E-11D8-A742-00039340AF4A@opengroupware.org>
Message-ID: <014501c42cea$09a1e1f0$0100000a@athlon>

Thank for your help, Helge

Is this "News editors" team supposed to be available initially or do I have
to create it myself? Since I don't have such a team in the database: can I
just add a new team (with the exact same name) or do I have to set/unset
particular fields in table persons?

Regards,

Roland

----- Original Message ----- 
From: "Helge Hess" <helge.hess@opengroupware.org>
To: <users@opengroupware.org>
Sent: Tuesday, April 27, 2004 11:06 PM
Subject: Re: [OGo-Users] IsAccountNewsEditor user right


> On 27.04.2004, at 21:45, Roland Plugge wrote:
> > Obviously editing news items depends on the state of
> > IsAccountNewsEditor. Unfortunately I can't find any field/flag related
> > with this or other access rights.
> >
> > How can I set these rights, editing news items in particular?
>
> All people in the "news editors" team are allowed to edit/create news.
> So just use the user manager to add the editors to this group.
>
> regards,
>    Helge
> -- 
> http://docs.opengroupware.org/Members/helge/
> OpenGroupware.org
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>
>


From users@opengroupware.org  Wed Apr 28 08:24:00 2004
From: users@opengroupware.org (Roland Plugge)
Date: Wed, 28 Apr 2004 09:24:00 +0200
Subject: Solved: [OGo-Users] IsAccountNewsEditor user right
References: <012701c42c90$38c71360$0100000a@athlon> <CD9B6768-988E-11D8-A742-00039340AF4A@opengroupware.org> <014501c42cea$09a1e1f0$0100000a@athlon>
Message-ID: <014f01c42cf1$c6dab920$0100000a@athlon>

I've found out the reason why I was unable to edit news items with users
other than root:

I probably removed the initial team "news editors" which seemed to be
archived
postgresql>
select * from team;

In the pg-build-schema the following command takes care of the initial team
during setup:
postgresql>
INSERT INTO team (company_id, description, is_team, number, login,
db_status,
                  object_version)
  VALUES (9991, 'news editors', 1, 'LS9991', 'newseditors', 'inserted', 1);

Since there already existed an archived team, I had to delete it first:
postgresql>
delete from team where company_id = 9991;

For me this solved the problem.....

----- Original Message ----- 
From: "Roland Plugge" <oog@four-elements.nl>
To: <users@opengroupware.org>
Sent: Wednesday, April 28, 2004 8:28 AM
Subject: Re: [OGo-Users] IsAccountNewsEditor user right


> Thank for your help, Helge
>
> Is this "News editors" team supposed to be available initially or do I
have
> to create it myself? Since I don't have such a team in the database: can I
> just add a new team (with the exact same name) or do I have to set/unset
> particular fields in table persons?
>
> Regards,
>
> Roland
>
> ----- Original Message ----- 
> From: "Helge Hess" <helge.hess@opengroupware.org>
> To: <users@opengroupware.org>
> Sent: Tuesday, April 27, 2004 11:06 PM
> Subject: Re: [OGo-Users] IsAccountNewsEditor user right
>
>
> > On 27.04.2004, at 21:45, Roland Plugge wrote:
> > > Obviously editing news items depends on the state of
> > > IsAccountNewsEditor. Unfortunately I can't find any field/flag related
> > > with this or other access rights.
> > >
> > > How can I set these rights, editing news items in particular?
> >
> > All people in the "news editors" team are allowed to edit/create news.
> > So just use the user manager to add the editors to this group.
> >
> > regards,
> >    Helge
> > -- 
> > http://docs.opengroupware.org/Members/helge/
> > OpenGroupware.org
> >
> > -- 
> > OpenGroupware.org Users
> > users@opengroupware.org
> > http://mail.opengroupware.org/mailman/listinfo/users
> >
> >
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Wed Apr 28 16:57:51 2004
From: users@opengroupware.org (Sven Siemsen)
Date: Wed, 28 Apr 2004 17:57:51 +0200
Subject: [OGo-Users] Project attributes
Message-ID: <200404281557.i3SFvqo8001364@butan126.server4free.de>

Dear List,

I'd love to know that, too! Anybody who knows...?

regards
Sven

users@opengroupware.org wrote: 
> Hello (me again...)
> 
> 1) While editing the attributes of a file I in a project see a reference to
> http://www.skyrix.com/namespaces/project-document:
> 
> What these attributes are used for?
> 
> 2) What the Links tabsheet of the Project/Contact/Enterprise is used 
> for? There are reference od "related links" + "type"
> 
> 
> Regards,
> Olivier
> 
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
> 


From users@opengroupware.org  Wed Apr 28 20:48:01 2004
From: users@opengroupware.org (Roland Plugge)
Date: Wed, 28 Apr 2004 21:48:01 +0200
Subject: [OGo-Users] ZideStore access problem
References: <200404281557.i3SFvqo8001364@butan126.server4free.de>
Message-ID: <019401c42d59$b6b6a960$0100000a@athlon>

I'm aware this subject has been covered before, but none of the items in the
mailinglists took me any further.

I've got an ogo server up and running ZideStore aswell.
Below I've written what I can/cannot do, which comes down to the following
problems:
* I can't use the ZideStore weblogin
* There's no logo (homepage.jpg) on the page
* I can't follow the URL to /zidestore/so/user without explicitly using port
23000 (except for root)

Cheers,

Roland


MORE INFO (situation, logs, settings, results)>>>>

I defined 2 users (both with password set):
- root
- balie

using browser:
can't enter weblogin from the link on //server-linux/zidestore
>>> object not found: zidestore => weblogin

can't find logo on page which refers to //server-linux/images/homepage.jpg
(httpd.conf is configured to use /zidestore/so/images, see below)

can point browser to //server-linux/zidestore/so/root
(User Homepage of Account 'root')

can't point browser to //server-linux/zidestore/so/balie
>>>An error occured during object publishing
>>>tried to access private object

can point browser to //server-linux:23000/zidestore/so/balie
(User Homepage of Account 'balie')

using cadaver:
can login to /zidestore
can get into /zidestore/so/root (as user root)
can get into /zidestore/so/balie (as user balie)

ogozidestore.log:
----------------------------------------------------------------------
Apr 28 21:05:39 ZideStore [5759]: SNS disabled.
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
Appointments.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
Contacts.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
EvoConnect.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
PrefsUI.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
Projects.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
RSS.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
Tasks.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
WCAP.zsp
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| vMem Size check enabled:
shutting down app when vMem > 200 MB
Apr 28 21:05:39 ZideStore [5759]: |ZideStore| WOHttpAdaptor listening on
address <InetSocketAddress: *:23000>
Apr 28 21:05:49 ZideStore [5759]: WOCompoundElement: pool embedding is on.
Apr 28 21:05:49 ZideStore [5759]: WOCompoundElement: id logging is on.
127.0.0.1 - - [28/Apr/2004:21:05:49 GMT] "GET /zidestore/ HTTP/1.1" 200 566
3.959 - - 9M
Apr 28 21:05:52 ZideStore [5759]: |ZideStore| ERROR: cannot fetch logins, no
cmdctx!
127.0.0.1 - - [28/Apr/2004:21:05:52 GMT] "GET /zidestore/weblogin HTTP/1.1"
401 0 0.026 - - 8K
Apr 28 21:05:53 ZideStore [5759]: |ZideStore| cannot create userfolder, not
a login name: 'weblogin'
Apr 28 21:05:53 ZideStore [5759]: |ZideStore| cannot create userfolder, not
a login name: 'weblogin'
Apr 28 21:05:53 ZideStore [5759]: |ZideStore| cannot create userfolder, not
a login name: 'weblogin'
127.0.0.1 - - [28/Apr/2004:21:05:53 GMT] "GET /zidestore/weblogin HTTP/1.1"
404 42 1.148 - - 2M
----------------------------------------------------------------------
apache/error.log
----------------------------------------------------------------------
[Wed Apr 28 21:28:05 2004] [error] [client 10.0.0.1] File does not exist:
/var/www/images/homepage.jpg
----------------------------------------------------------------------
httpd.conf:
----------------------------------------------------------------------
##OpenGroupware>>>
LoadModule ngobjweb_module
/usr/lib/opengroupware.org/WebServer/ngobjweb_1.3.29.so
<LocationMatch "^/OpenGroupware/*">
SetHandler ngobjweb-adaptor
SetAppPort 20000
</LocationMatch>
<LocationMatch "^/agenda/*">
SetHandler ngobjweb-adaptor
SetAppPort 20000
</LocationMatch>
<LocationMatch "^/zidestore/*">
SetHandler ngobjweb-adaptor
SetAppPort 23000
</LocationMatch>
Alias /OpenGroupware.woa/WebServerResources/
/usr/lib/opengroupware.org/WebServerResources/
Alias /ArticleImages /usr/lib/opengroupware.org/news
Alias /zidestore/so/images
/usr/lib/opengroupware.org/WOApps/ZideStore.woa/WebServerResources
##<<<OpenGroupware
----------------------------------------------------------------------


From users@opengroupware.org  Wed Apr 28 21:46:00 2004
From: users@opengroupware.org (dbf)
Date: Wed, 28 Apr 2004 21:46:00 +0100
Subject: [OGo-Users] Bug in Return Receipt ?
Message-ID: <468D78E4EE5C6A4093A4C00F29DF513D06FF8CAB@VS2.hdi.tvcabo>

This is a multi-part message in MIME format.

------_=_NextPart_001_01C42D61.D070F3CA
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Sorry,

A search on bugzilla returned this :

http://bugzilla.opengroupware.org/bugzilla/show_bug.cgi?id=3D648

Thnks,
Nuno Ferreira

-----Original Message-----
From:	users-admin@opengroupware.org on behalf of dbf
Sent:	Mon 4/26/2004 5:07 PM
To:	users@opengroupware.org
Cc:=09
Subject:	[OGo-Users] Bug in Return Receipt ?
Hi,

I=B4ve upgraded Ogo release from Dez. to the last one from 24 of April, =
and before this upgrade in Email preferences i=B4had something like this =
in the Return Receipt :

Receipt text :
Your email was opened on :=20
Date : $date$=20
To : $to$=20
Subect : '$subject$'=20

And the sender would receive a message with the info above.

Now, after the upgrade the email with the notification only displays =
this :

Content Type:  	text/plain  	 	 =09
ask

If I change in preferences to auto , the message will display this :

Content Type:  	text/plain  	 	 =09
auto

If I leave the subect empty Ogo will generate an auto title wich still =
work correctly.

Can anyone confirm this, or is something miss configured in my system ?

Best Regards,
Nuno Ferreira
--=20
OpenGroupware.org Users
users@opengroupware.org
http://mail.opengroupware.org/mailman/listinfo/users




------_=_NextPart_001_01C42D61.D070F3CA
Content-Type: application/ms-tnef;
	name="winmail.dat"
Content-Transfer-Encoding: base64
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=

------_=_NextPart_001_01C42D61.D070F3CA--

From users@opengroupware.org  Thu Apr 29 06:01:29 2004
From: users@opengroupware.org (Jason Flatt)
Date: Wed, 28 Apr 2004 22:01:29 -0700
Subject: [OGo-Users] Remote Access of an OGo Server . . .
Message-ID: <200404282201.29032.jason@flattfamily.com>

Maybe I'm just misunderstanding this, but I was under the impression that when 
I followed the information outlined in the Apache install and the FAQ, I 
would be able to access an OGo server from a remote location through Apache 
w/o having to have my IP or hostname in the OGo startup, but it is not 
working for me.

The Web server responds fine if I am not trying to access OGo, and if I put my 
remote IP in the startup options, OGo starts fine.  If I have only localhost 
or if I leave that directive totally out of the startup, OGo/Apache times out 
and I get the ACCESS DENIED error in the OGo log.

Here are the Web pages I used as referrences:
http://www.opengroupware.org/en/users/faq/index.html
http://www.opengroupware.org/en/install/apache13.html
http://helms-deep.cable.nu/~rwh/howtos/OpenGroupware-Debian-HOWTO.html
and searching through this mail list.

1)  Am I supposed to be able to remotely access the OGo server via Apache w/o 
having my host/domain/IP/whatever information in the startup options?

2)  If so, where should I be looking for potential errors or mistakes in going 
through the process?

-- 
Jason Flatt (jason @ flattfamily . com)
Father of five (http://www.flattfamily.com/)
Linux user (http://www.sourcemage.org/)
IRC Nick: Oadae  Channels: #sourcemage, #lvlug  Server: irc.freenode.net

-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS/IT d(-) s+:- a>++++ C++$(+++) UL++++ P(+) L+++ E- W++ N+@ o? K? w-- O? 
M-- V PS- PE+ Y+ PGP@ t 5+ X R tv--() b+@ DI+@ D+++ G e h---- r+++ y++++
------END GEEK CODE BLOCK------

From users@opengroupware.org  Thu Apr 29 06:58:04 2004
From: users@opengroupware.org (Charles Duffy)
Date: Thu, 29 Apr 2004 00:58:04 -0500
Subject: [OGo-Users] Remote Access of an OGo Server . . .
In-Reply-To: <200404282201.29032.jason@flattfamily.com>
References: <200404282201.29032.jason@flattfamily.com>
Message-ID: <1083218284.26009.9.camel@localhost>

On Thu, 2004-04-29 at 00:01, Jason Flatt wrote:
> 1)  Am I supposed to be able to remotely access the OGo server via Apache w/o 
> having my host/domain/IP/whatever information in the startup options?

Yes. You should only need to have the IP of your Apache server in the
OGo startup options.

> 2)  If so, where should I be looking for potential errors or mistakes in going 
> through the process?

How 'bout the relevant bits of your apache.conf? (You *are* using
mod_ngobjweb, right?)

And if you're going to be posting again with details, you might as well
throw in the command line args you're using while 'yer at it.


From users@opengroupware.org  Thu Apr 29 11:06:03 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Thu, 29 Apr 2004 06:06:03 -0400
Subject: [OGo-Users] Remote Access of an OGo Server . . .
In-Reply-To: <200404282201.29032.jason@flattfamily.com>
References: <200404282201.29032.jason@flattfamily.com>
Message-ID: <1083233163.3389.10.camel@localhost.localdomain>

On Thu, 2004-04-29 at 01:01, Jason Flatt wrote:
> Maybe I'm just misunderstanding this, but I was under the impression that when 
> I followed the information outlined in the Apache install and the FAQ, I 
> would be able to access an OGo server from a remote location through Apache 
> w/o having to have my IP or hostname in the OGo startup, but it is not 
> working for me.
> The Web server responds fine if I am not trying to access OGo, and if I put my 
> remote IP in the startup options, OGo starts fine.  If I have only localhost 
> or if I leave that directive totally out of the startup, OGo/Apache times out 
> and I get the ACCESS DENIED error in the OGo log.

You haven't setup access via apache.  "ngobjweb"

> Here are the Web pages I used as referrences:
> http://www.opengroupware.org/en/users/faq/index.html
> http://www.opengroupware.org/en/install/apache13.html
> http://helms-deep.cable.nu/~rwh/howtos/OpenGroupware-Debian-HOWTO.html
> and searching through this mail list.
> 1)  Am I supposed to be able to remotely access the OGo server via Apache w/o 
> having my host/domain/IP/whatever information in the startup options?
> 2)  If so, where should I be looking for potential errors or mistakes in going 
> through the process?

ngobjweb

As the documentation clearly states....
<LocationMatch "^/OpenGroupware/*">
SetHandler ngobjweb-adaptor
SetAppPort 20000
</LocationMatch>

Then point your browser at http://{hostname}/OpenGroupware/

If your trying to go to http://{hostname}:20000.... DON'T.


From users@opengroupware.org  Thu Apr 29 11:19:17 2004
From: users@opengroupware.org (Roland Plugge)
Date: Thu, 29 Apr 2004 12:19:17 +0200
Subject: [OGo-Users] ZideStore access problem (& Mozilla)
References: <200404281557.i3SFvqo8001364@butan126.server4free.de> <019401c42d59$b6b6a960$0100000a@athlon>
Message-ID: <01a701c42dd3$6db4a080$0100000a@athlon>

The mailinglist archives have been very helpfull so far, but I seems they're
leaving me with some rather 'trivial' problems:

Using OGO w/ZideStore and Mozilla as client (5.0/winXP), having a few user
accounts (such as 'balie', set up with password) and a team (former 'all
intraned' renamed to) 'flehite'.

Following message helped me setting up Mozilla
http://mail.opengroupware.org/pipermail/users/2003-September/006201.html

So I'm setting up a private agenda first:
http://server-linux/zidestore/so/balie/Calendar/calendar.ics
No probs... works fine

Next, I configure a public agenda (of team 'Flehite')
http://server-linux/zidestore/so/balie/Groups/Flehite/Calendar/calendar.ics
(Checked with cadaver, collection appears to exist)

Now, during refresh remote calendars. Mozilla starts nagging:
This doesn't appear to be a valid file. Here's what I got back from
http://balie:xxx@server-linux/zidestore/so/balie/Calendar/calendar.ics
Result:

Without any result....
I've seen the same massage for the team aswell. Every works fine as long as
there's only one remote agenda.
(And yes, there are items in both agenda's private and public)

>>>> So how can I access both a private and team-agenda???

Maybe this will give you a clue:
* using cadaver "ls public/Calendar" results in "500 Internal Server Error"
* using cadaver "ls public/Accounts gives me a stack of "00000.vcf?sn=xxx"
items
* using cadaver "ls Calendar" gives me one "21050.ics" file
* using cadaver "ls Overview" gives me a few "00000.ics" files

>From Mozilla I can't even access
http://server-linux/zidestore/so/balie/overview/21050.ics (my own 'balie'
account), let alone viewing another agenda.

>>>>> So how can I view another agenda (I have access to) explicitly, so not
by using the team-agenda????

Furthermore, regarding to the questions below:
1. When clicking the weblogin from http://server-linux/zidestore I am able
to type in a name and password (using Internet Explorer 6), but afterwards
the browser goes to http://server-linux/zidestore/weblogin leaving me with a
404 errorcode. Then I can manually browse to
http://server-linux/zidestore/so/balie
2. the logo still isn't there?????
3. I found out why I couldn't switch user account after browsing to
http://server-linux/zidestore/so/balie, IE appears to remember the username
used to login..... just use another browser instance (duh!)

>>>>> Any ideas on 1 and 2????

About Mozilla:
a) Is it possible while viewing the team agenda, to see what user an
appoinment belongs to?
b) Is it possible to create an appointment for/with someone else (or do I
need to set up access to his/her agenda explicitly)?

>>>>>> Anyone????

Thanks, you've been a great help so far.....

----- Original Message ----- 
From: "Roland Plugge" <oog@four-elements.nl>
To: <users@opengroupware.org>
Sent: Wednesday, April 28, 2004 9:48 PM
Subject: [OGo-Users] ZideStore access problem


> I'm aware this subject has been covered before, but none of the items in
the
> mailinglists took me any further.
>
> I've got an ogo server up and running ZideStore aswell.
> Below I've written what I can/cannot do, which comes down to the following
> problems:
> 1. I can't use the ZideStore weblogin
> 2. There's no logo (homepage.jpg) on the page
> 3. I can't follow the URL to /zidestore/so/user without explicitly using
port
> 23000 (except for root)
>
> Cheers,
>
> Roland
>
>
> MORE INFO (situation, logs, settings, results)>>>>
>
> I defined 2 users (both with password set):
> - root
> - balie
>
> using browser:
> can't enter weblogin from the link on //server-linux/zidestore
> >>> object not found: zidestore => weblogin
>
> can't find logo on page which refers to //server-linux/images/homepage.jpg
> (httpd.conf is configured to use /zidestore/so/images, see below)
>
> can point browser to //server-linux/zidestore/so/root
> (User Homepage of Account 'root')
>
> can't point browser to //server-linux/zidestore/so/balie
> >>>An error occured during object publishing
> >>>tried to access private object
>
> can point browser to //server-linux:23000/zidestore/so/balie
> (User Homepage of Account 'balie')
>
> using cadaver:
> can login to /zidestore
> can get into /zidestore/so/root (as user root)
> can get into /zidestore/so/balie (as user balie)
>
> ogozidestore.log:
> ----------------------------------------------------------------------
> Apr 28 21:05:39 ZideStore [5759]: SNS disabled.
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> Appointments.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> Contacts.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> EvoConnect.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> PrefsUI.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> Projects.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> RSS.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> Tasks.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| register ZideStore product:
> WCAP.zsp
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| vMem Size check enabled:
> shutting down app when vMem > 200 MB
> Apr 28 21:05:39 ZideStore [5759]: |ZideStore| WOHttpAdaptor listening on
> address <InetSocketAddress: *:23000>
> Apr 28 21:05:49 ZideStore [5759]: WOCompoundElement: pool embedding is on.
> Apr 28 21:05:49 ZideStore [5759]: WOCompoundElement: id logging is on.
> 127.0.0.1 - - [28/Apr/2004:21:05:49 GMT] "GET /zidestore/ HTTP/1.1" 200
566
> 3.959 - - 9M
> Apr 28 21:05:52 ZideStore [5759]: |ZideStore| ERROR: cannot fetch logins,
no
> cmdctx!
> 127.0.0.1 - - [28/Apr/2004:21:05:52 GMT] "GET /zidestore/weblogin
HTTP/1.1"
> 401 0 0.026 - - 8K
> Apr 28 21:05:53 ZideStore [5759]: |ZideStore| cannot create userfolder,
not
> a login name: 'weblogin'
> Apr 28 21:05:53 ZideStore [5759]: |ZideStore| cannot create userfolder,
not
> a login name: 'weblogin'
> Apr 28 21:05:53 ZideStore [5759]: |ZideStore| cannot create userfolder,
not
> a login name: 'weblogin'
> 127.0.0.1 - - [28/Apr/2004:21:05:53 GMT] "GET /zidestore/weblogin
HTTP/1.1"
> 404 42 1.148 - - 2M
> ----------------------------------------------------------------------
> apache/error.log
> ----------------------------------------------------------------------
> [Wed Apr 28 21:28:05 2004] [error] [client 10.0.0.1] File does not exist:
> /var/www/images/homepage.jpg
> ----------------------------------------------------------------------
> httpd.conf:
> ----------------------------------------------------------------------
> ##OpenGroupware>>>
> LoadModule ngobjweb_module
> /usr/lib/opengroupware.org/WebServer/ngobjweb_1.3.29.so
> <LocationMatch "^/OpenGroupware/*">
> SetHandler ngobjweb-adaptor
> SetAppPort 20000
> </LocationMatch>
> <LocationMatch "^/agenda/*">
> SetHandler ngobjweb-adaptor
> SetAppPort 20000
> </LocationMatch>
> <LocationMatch "^/zidestore/*">
> SetHandler ngobjweb-adaptor
> SetAppPort 23000
> </LocationMatch>
> Alias /OpenGroupware.woa/WebServerResources/
> /usr/lib/opengroupware.org/WebServerResources/
> Alias /ArticleImages /usr/lib/opengroupware.org/news
> Alias /zidestore/so/images
> /usr/lib/opengroupware.org/WOApps/ZideStore.woa/WebServerResources
> ##<<<OpenGroupware
> ----------------------------------------------------------------------
>
> -- 
> OpenGroupware.org Users
> users@opengroupware.org
> http://mail.opengroupware.org/mailman/listinfo/users
>


From users@opengroupware.org  Thu Apr 29 11:30:14 2004
From: users@opengroupware.org (Adam Tauno Williams)
Date: Thu, 29 Apr 2004 06:30:14 -0400
Subject: [OGo-Users] Project attributes
In-Reply-To: <200404281557.i3SFvqo8001364@butan126.server4free.de>
References: <200404281557.i3SFvqo8001364@butan126.server4free.de>
Message-ID: <1083234614.3389.27.camel@localhost.localdomain>

> > 1) While editing the attributes of a file I in a project see a reference to
> > http://www.skyrix.com/namespaces/project-document:

Perhaps they have to do with -
http://docs.opengroupware.org/Members/helge/OGoPublisher/SKYOBJ/view
- but I haven't seen any documentation that refers to that page.
 
> > What these attributes are used for?
> > 2) What the Links tabsheet of the Project/Contact/Enterprise is used 
> > for? There are reference od "related links" + "type"

These correspond to entries in the obj_link table.  Apparently the core
logic for this has been implemented but there is no interface for
utilizing the feature in the web interface, the XML-RPC API, or
Zidestore.  So at this point, the "links" tabs are nothing.

http://docs.opengroupware.org/Members/helge/Logic/objectlinking/view

But there is -
http://docs.opengroupware.org/Members/elements/Link/view


From users@opengroupware.org  Thu Apr 29 14:28:06 2004
From: users@opengroupware.org (Jason Flatt)
Date: Thu, 29 Apr 2004 06:28:06 -0700
Subject: [OGo-Users] Remote Access of an OGo Server . . .
In-Reply-To: <1083233163.3389.10.camel@localhost.localdomain>
References: <200404282201.29032.jason@flattfamily.com> <1083233163.3389.10.camel@localhost.localdomain>
Message-ID: <200404290628.06827.jason@flattfamily.com>

On Wednesday 28 April 2004 10:58 pm, Charles Duffy wrote:
> On Thu, 2004-04-29 at 00:01, Jason Flatt wrote:
> > 1)  Am I supposed to be able to remotely access the OGo server via Apache
> > w/o having my host/domain/IP/whatever information in the startup options?
>
> Yes. You should only need to have the IP of your Apache server in the
> OGo startup options.
>

On Thursday 29 April 2004 3:06 am, Adam Tauno Williams wrote:
>
> Then point your browser at http://{hostname}/OpenGroupware/
>
> If your trying to go to http://{hostname}:20000.... DON'T.

Adam and Charles,

Both of you gave me hints on what to check this morning, and my server gave me 
a slightly different error than I had seen last night.

It may have been partly the port number I was logging into, but I'm not sure.  
I was trying so many different things, that I don't remember which different 
ways I tried to log into the server.  To complicate matters, the router to 
our server is setup to receive requests from one port number and forward them 
to port 80 on the server.

Ultimately, I think I needed the name of the server in the startup, rather 
than "localhost".  It wasn't until I tried to log in this morning that I saw 
the errors denying access to the server itself.  When I changed that, I got 
right in.  I thought that using 'localhost' would be enough, but I guess not.

Thank you both Adam and Charles for responding and providing the clues to get 
it working correctly.

-- 
Jason Flatt (jason @ flattfamily . com)
Father of five (http://www.flattfamily.com/)
Linux user (http://www.sourcemage.org/)
IRC Nick: Oadae  Channels: #sourcemage, #lvlug  Server: irc.freenode.net

-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS/IT d(-) s+:- a>++++ C++$(+++) UL++++ P(+) L+++ E- W++ N+@ o? K? w-- O? 
M-- V PS- PE+ Y+ PGP@ t 5+ X R tv--() b+@ DI+@ D+++ G e h---- r+++ y++++
------END GEEK CODE BLOCK------

From users@opengroupware.org  Thu Apr 29 14:32:51 2004
From: users@opengroupware.org (Helge Hess)
Date: Thu, 29 Apr 2004 15:32:51 +0200
Subject: [OGo-Users] Project attributes
In-Reply-To: <c6go3l$j4m$1@sea.gmane.org>
References: <c6go3l$j4m$1@sea.gmane.org>
Message-ID: <B6633395-99E1-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 25, 2004, at 6:13 PM, Olivier Hallot wrote:
> 1) While editing the attributes of a file I in a project see a 
> reference to
> http://www.skyrix.com/namespaces/project-document:
> What these attributes are used for?

Well, properties can be put into namespaces (or lets call it "property 
sets" which might be a better word for that), which you can usually 
ignore. The namespace above is the default namespace for custom 
document properties.

The property editor in OGo is IMHO pretty much broken from an UI point 
of view and needs serious cleanup.

> 2) What the Links tabsheet of the Project/Contact/Enterprise is used 
> for? There are reference od "related links" + "type"

This is currently only used in the Palm synchronization for storing 
links between conflicting records.

But: we found someone who sponsors some work on that module, this is 
work in progress and probably will be completed next week.

best regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Thu Apr 29 15:00:37 2004
From: users@opengroupware.org (ravi)
Date: Thu, 29 Apr 2004 10:00:37 -0400
Subject: [OGo-Users] Remote Access of an OGo Server . . .
In-Reply-To: <1083233163.3389.10.camel@localhost.localdomain>
References: <200404282201.29032.jason@flattfamily.com> <1083233163.3389.10.camel@localhost.localdomain>
Message-ID: <40910A85.3080904@exitleft.org>


for those facing remote access problems, or problems with the link in
calendar notification email being "localhost", one thing that helped me
was to make sure that (a) i use ngobjweb and (b) the following lines in
httpd.conf are commented out, if present:

> #ProxyPass /OpenGroupware http://localhost:20000/OpenGroupware
> #ProxyPassReverse /OpenGroupware htttp://localhost:20000/OpenGroupware
> #ProxyPass /OpenGroupware.woa http://localhost:20000/OpenGroupware.woa
> #ProxyPassReverse /OpenGroupware.woa htttp://localhost:20000/OpenGroupware.woa
> #ProxyPass /OpenGroupware.org http://localhost:20000/OpenGroupware.org
> #ProxyPassReverse /OpenGroupware.org htttp://localhost:20000/OpenGroupware.org

YMMV.

	--ravi

From users@opengroupware.org  Thu Apr 29 18:23:58 2004
From: users@opengroupware.org (Justin Fletcher)
Date: Thu, 29 Apr 2004 12:23:58 -0500
Subject: [OGo-Users] missing directory config in reuqest
Message-ID: <200404291223.58297.justin.fletcher@murraystate.edu>

My new install of OpenGroupware seems to be working properly and 
without errors when I connect directly to:
http://localhost:20000/OpenGroupware
But I am having problems with Apache 1.3.29 and nbogjweb.  The 
ngobjweb module appears to be loading ok, if only in that there are 
no errors or warnings when Apache is started.  But when I try to 
connect to:
http://localhost/OpenGroupware/
I get an "Internal Server Error", and this in the apache error_log:
[Thu Apr 29 11:50:58 2004] [error] (2)No such file or directory: 
missing directory config in request ...
I have added the following lines to my httpd.conf:
LoadModule ngobjweb_module /etc/apache/modules/ngobjweb_1.2.29.so

 AddModule ngobjweb_module.c

 <LocationMatch "^/OpenGroupware/*">
 SetHandler ngobjweb-adaptor
 SetAppPort 20000
 </LocationMatch>

 Alias /OpenGroupware.woa/WebServerResources/ \
   /home/justin/OGo/WebServerResources/
(the above is actually all on one line)
as per the documentation.

I have searched through the mailing list and through Google, but have 
been unable to find a solution.  I did find a question that mentioned 
this error but the user was getting a warning when starting apache, 
and the reply mentioned a broken module with no information on how to 
fix it, so I am unable to determine if I have a broken module or what 
I would do to fix it if I did.

I have hunted through the ngobjweb code and tracked down the error 
message in handler.c to this 'if' statement:
if (r->per_dir_config == NULL) {
in the:
static ngobjweb_dir_config *_getConfig(request_rec *r) {
function, but am not familiar enough with the software or the setup to 
figure out why r->per_dir_config is NULL, and what to do to fix it.

Any help/pointers/info would be much appreciated.

Many thanks,
-Justin

From users@opengroupware.org  Thu Apr 29 20:57:37 2004
From: users@opengroupware.org (Justin Fletcher)
Date: Thu, 29 Apr 2004 14:57:37 -0500
Subject: [OGo-Users] missing directory config in reuqest
In-Reply-To: <200404291223.58297.justin.fletcher@murraystate.edu>
References: <200404291223.58297.justin.fletcher@murraystate.edu>
Message-ID: <200404291457.37267.justin.fletcher@murraystate.edu>

On Thursday April 29 2004 12:23 pm, Justin Fletcher wrote:
> My new install of OpenGroupware seems to be working properly and
> without errors when I connect directly to:
> http://localhost:20000/OpenGroupware
> But I am having problems with Apache 1.3.29 and nbogjweb.  The
> ngobjweb module appears to be loading ok, if only in that there are
> no errors or warnings when Apache is started.  But when I try to
> connect to:
> http://localhost/OpenGroupware/
> I get an "Internal Server Error", and this in the apache error_log:
> [Thu Apr 29 11:50:58 2004] [error] (2)No such file or directory:
> missing directory config in request ...
> Many thanks,
> -Justin
Replying to my own post:

I compiled ngobjweb like this 'apxs -c *.c'  Renamed the generated .so 
file to to correct name, and it seems to be working now...
Maybe something in the way the GNUmakefile is compiling it created 
problems on my system?

-Justin

From users@opengroupware.org  Thu Apr 29 20:59:44 2004
From: users@opengroupware.org (Brian Zammit)
Date: Thu, 29 Apr 2004 19:59:44 -0000
Subject: [OGo-Users] opengroupware sys v init script change
Message-ID: <20040429195944.A50E53C46@sabroncas001.systemsaligned.com>

Hello list,

It seems the toasterz sys V init scripts are starting ogo before postgresql and
httpd on fedora core 1 systems, and I would suspect other sys v systems. This
prevents ogo from starting on reboot of the system.

Proposed solution to this bug:

On existing systems, you have to run:
chkconfig --del opengroupware

Then change the following line in /etc/init.d/opengroupware from:
# chkconfig: 2345 75 25

To:
# chkconfig: 235 99 15

And run:
chkconfig --add opengroupware


It may be useful to get the toasterz scripts changed to include this change as
well, assuming it doesn't break anything in the process :)


-- 
Brian

__________________________
Brian Zammit     Consultant

Systems Aligned Inc.
www.systemsaligned.com
__________________________


From users@opengroupware.org  Fri Apr 30 00:26:49 2004
From: users@opengroupware.org (Kelley G)
Date: Thu, 29 Apr 2004 16:26:49 -0700
Subject: [OGo-Users] opengroupware sys v init script change
In-Reply-To: <20040429195944.A50E53C46@sabroncas001.systemsaligned.com>
References: <20040429195944.A50E53C46@sabroncas001.systemsaligned.com>
Message-ID: <40918F39.2010101@toasterz.com>

Brian Zammit wrote:

>Hello list,
>
>It seems the toasterz sys V init scripts are starting ogo before postgresql and
>httpd on fedora core 1 systems, and I would suspect other sys v systems. This
>prevents ogo from starting on reboot of the system.
>
>Proposed solution to this bug:
>
>On existing systems, you have to run:
>chkconfig --del opengroupware
>
>Then change the following line in /etc/init.d/opengroupware from:
># chkconfig: 2345 75 25
>
>To:
># chkconfig: 235 99 15
>
>And run:
>chkconfig --add opengroupware
>
>
>It may be useful to get the toasterz scripts changed to include this change as
>well, assuming it doesn't break anything in the process :)
>
>
>  
>
will change the chkconfig line tomorrow.
thanks.

-- 

kelley g

oooooooooooooooooooooooooo
http://toasterz.com
http://exchangekiller.com
oooooooooooooooooooooooooo


From users@opengroupware.org  Fri Apr 30 00:39:42 2004
From: users@opengroupware.org (Kelley G)
Date: Thu, 29 Apr 2004 16:39:42 -0700
Subject: [OGo-Users] opengroupware sys v init script change
In-Reply-To: <20040429195944.A50E53C46@sabroncas001.systemsaligned.com>
References: <20040429195944.A50E53C46@sabroncas001.systemsaligned.com>
Message-ID: <4091923E.3000706@toasterz.com>

Brian Zammit wrote:

>Hello list,
>
>It seems the toasterz sys V init scripts are starting ogo before postgresql and
>httpd on fedora core 1 systems, and I would suspect other sys v systems. This
>prevents ogo from starting on reboot of the system.
>
>Proposed solution to this bug:
>
>On existing systems, you have to run:
>chkconfig --del opengroupware
>
>Then change the following line in /etc/init.d/opengroupware from:
># chkconfig: 2345 75 25
>
>To:
># chkconfig: 235 99 15
>
>And run:
>chkconfig --add opengroupware
>
>
>It may be useful to get the toasterz scripts changed to include this change as
>well, assuming it doesn't break anything in the process :)
>
>
>  
>
i went ahead and made the changes without considering further community 
comments. :)
http://toasterz.com/ogo/docs/opengroupware
thanks again.
enjoy,

-- 

kelley g

oooooooooooooooooooooooooo
http://toasterz.com
http://exchangekiller.com
oooooooooooooooooooooooooo


From users@opengroupware.org  Fri Apr 30 03:36:56 2004
From: users@opengroupware.org (matt hatfield)
Date: Thu, 29 Apr 2004 22:36:56 -0400
Subject: [OGo-Users] Mandrake 9.2 install help
Message-ID: <4091BBC8.4010401@concrete-donkey.us>

Hello,

    I am trying to experiment with opengroupware but I am having some 
problems. I am trying to use the install instructions that I found here 
http://docs.opengroupware.org/Members/ffrouin/Procedures/EN/OGoMD92/view
but several of the packages are giving errors dealing with users and 
groups that don't exist. I tried adding the user and group manually, the 
install completes now however, the path seems not to be set for the 
user. I do set and get /home/opengroupware/bin is in the path but the 
directory does not exist, so I am wondering if anyone else has any 
experience with this or knows of a problem with the rpms. Thanks in advance.

Matt

From users@opengroupware.org  Fri Apr 30 06:45:05 2004
From: users@opengroupware.org (Kelley G)
Date: Thu, 29 Apr 2004 22:45:05 -0700
Subject: [OGo-Users] Mandrake 9.2 install help
In-Reply-To: <4091BBC8.4010401@concrete-donkey.us>
References: <4091BBC8.4010401@concrete-donkey.us>
Message-ID: <4091E7E1.7040900@toasterz.com>

matt hatfield wrote:

> Hello,
>
>    I am trying to experiment with opengroupware but I am having some 
> problems. I am trying to use the install instructions that I found 
> here 
> http://docs.opengroupware.org/Members/ffrouin/Procedures/EN/OGoMD92/view
> but several of the packages are giving errors dealing with users and 
> groups that don't exist. I tried adding the user and group manually, 
> the install completes now however, the path seems not to be set for 
> the user. I do set and get /home/opengroupware/bin is in the path but 
> the directory does not exist, so I am wondering if anyone else has any 
> experience with this or knows of a problem with the rpms. Thanks in 
> advance.
>
> Matt

path for opengroupware user should be /opt or /usr/bin.
read further the docs and the list archives.

-- 

kelley g

oooooooooooooooooooooooooo
http://toasterz.com
http://exchangekiller.com
oooooooooooooooooooooooooo


From users@opengroupware.org  Fri Apr 30 09:31:47 2004
From: users@opengroupware.org (marc)
Date: Fri, 30 Apr 2004 10:31:47 +0200
Subject: [OGo-Users] compiling sope (install on gentoo)
Message-ID: <c6t2ti$srs$1@sea.gmane.org>

Im following the build how-to on OGo's site. And have come to sope, but
this one will not compile.

Only thing I get is this:

EONull+JS.m:3:2: warning: #import is obsolete, use an #ifndef wrapper in
the header file
In file included from EONull+JS.m:4:
../common.h:4:24: warning: js/jsapi.h: No such file or directory
../common.h:5:24: warning: js/jsobj.h: No such file or directory
../common.h:6:25: warning: js/jsutil.h: No such file or directory
../common.h:7:24: warning: js/jsfun.h: No such file or directory
../common.h:8:26: warning: js/jsarray.h: No such file or directory
../common.h:19:39: warning: extensions/objc-runtime.h: No such file or
directory
EONull+JS.m:8: error: syntax error before "jsval"
make[3]: *** [shared_debug_obj/ix86/linux-gnu/gnu-gnu-gnu/EONull+JS.o]
Error 1
make[2]: *** [CoreJS.all.subproject.variables] Error 2
make[1]: *** [libNGJavaScript.all.library.variables] Error 2
make: *** [internal-all] Error 2



And I have installe the spidermonkey,  The SKYRiX Libraries for XML
Processing and The SKYRiX Core libraries.

But the SOPE will not.

Any HELP??????


From users@opengroupware.org  Fri Apr 30 13:13:54 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 30 Apr 2004 14:13:54 +0200
Subject: [OGo-Users] compiling sope (install on gentoo)
In-Reply-To: <c6t2ti$srs$1@sea.gmane.org>
References: <c6t2ti$srs$1@sea.gmane.org>
Message-ID: <D92529D6-9A9F-11D8-8F9A-000393BBAFF6@opengroupware.org>

On Apr 30, 2004, at 10:31 AM, marc wrote:
> EONull+JS.m:3:2: warning: #import is obsolete, use an #ifndef wrapper 
> in
> the header file

You can ignore that. You might want to upgrade your compiler, as 
#import was "undeprecated".

> In file included from EONull+JS.m:4:
> ../common.h:4:24: warning: js/jsapi.h: No such file or directory

This is a clear sign that you did not properly install SpiderMonkey as 
coming with OGo.

> And I have installe the spidermonkey

No, something went wrong here. See above, the compiler doesn't find the 
SpiderMonkey header files.

Greets
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Fri Apr 30 13:25:28 2004
From: users@opengroupware.org (marc)
Date: Fri, 30 Apr 2004 14:25:28 +0200
Subject: [OGo-Users] Re: compiling sope (install on gentoo)
In-Reply-To: <D92529D6-9A9F-11D8-8F9A-000393BBAFF6@opengroupware.org>
References: <c6t2ti$srs$1@sea.gmane.org> <D92529D6-9A9F-11D8-8F9A-000393BBAFF6@opengroupware.org>
Message-ID: <c6tgjo$tsn$1@sea.gmane.org>

Then why can I compile the SKYRiX Core Libraries??? Don't they use 
spidermonkey???

I used the spidermonkey from mozilla. Not the one from OGo's site. Do I 
have to use them??
The spidermonkey I have installed works fin.



Helge Hess wrote:
> On Apr 30, 2004, at 10:31 AM, marc wrote:
> 
>> EONull+JS.m:3:2: warning: #import is obsolete, use an #ifndef wrapper in
>> the header file
> 
> 
> You can ignore that. You might want to upgrade your compiler, as #import 
> was "undeprecated".
> 
>> In file included from EONull+JS.m:4:
>> ../common.h:4:24: warning: js/jsapi.h: No such file or directory
> 
> 
> This is a clear sign that you did not properly install SpiderMonkey as 
> coming with OGo.
> 
>> And I have installe the spidermonkey
> 
> 
> No, something went wrong here. See above, the compiler doesn't find the 
> SpiderMonkey header files.
> 
> Greets
>   Helge


From users@opengroupware.org  Fri Apr 30 09:32:07 2004
From: users@opengroupware.org (=?ISO-8859-1?Q?Frank_N=F8rvig?=)
Date: Fri, 30 Apr 2004 10:32:07 +0200
Subject: [OGo-Users] OpenGroupware on Gentoo
Message-ID: <c6t2rt$tit$1@sea.gmane.org>

Hello,

Does anyone here know a good guide to installing on Gentoo Linux?

Regards,
Frank Nørvig


From users@opengroupware.org  Fri Apr 30 14:28:47 2004
From: users@opengroupware.org (Justin Fletcher)
Date: Fri, 30 Apr 2004 08:28:47 -0500
Subject: [OGo-Users] OpenGroupware on Gentoo
In-Reply-To: <c6t2rt$tit$1@sea.gmane.org>
References: <c6t2rt$tit$1@sea.gmane.org>
Message-ID: <200404300828.47617.justin.fletcher@murraystate.edu>

On Friday April 30 2004 3:32 am, Frank N=F8rvig wrote:
> Hello,
>
> Does anyone here know a good guide to installing on Gentoo Linux?
>
> Regards,
> Frank N=F8rvig

I followed the instructions given for building from the source tree,=20
then the regular installed instructions without problems.  The only=20
exception was ngobjweb, which I had to compile with 'apxs -c *.c',=20
rename the generated .so file to ngobjweb_1.3.29.so, and move it into=20
the directory I specified in /etc/apache/conf/apache.conf (the=20
GNUmakefile seemed to generate a broken module.  Not sure why).
It was pretty straight forward.

=2DJustin

From users@opengroupware.org  Fri Apr 30 20:25:05 2004
From: users@opengroupware.org (Helge Hess)
Date: Fri, 30 Apr 2004 21:25:05 +0200
Subject: [OGo-Users] Re: compiling sope (install on gentoo)
In-Reply-To: <c6tgjo$tsn$1@sea.gmane.org>
References: <c6t2ti$srs$1@sea.gmane.org> <D92529D6-9A9F-11D8-8F9A-000393BBAFF6@opengroupware.org> <c6tgjo$tsn$1@sea.gmane.org>
Message-ID: <15AF487C-9ADC-11D8-BC8A-00039340AF4A@opengroupware.org>

On 30.04.2004, at 14:25, marc wrote:
> Then why can I compile the SKYRiX Core Libraries??? Don't they use 
> spidermonkey???

No, they don't.

> I used the spidermonkey from mozilla. Not the one from OGo's site. Do 
> I have to use them??

I think this would be best, yes. Otherwise you need to patch the 
include pathes so that it finds your own SpiderMonkey version.

regards,
   Helge
-- 
http://docs.opengroupware.org/Members/helge/
OpenGroupware.org


From users@opengroupware.org  Fri Apr 30 22:05:18 2004
From: users@opengroupware.org (Charles Bodley)
Date: Fri, 30 Apr 2004 17:05:18 -0400
Subject: [OGo-Users] install dependencies error
Message-ID: <000001c42ef6$d8443e00$3800000a@20th>

This is a multi-part message in MIME format.

------=_NextPart_000_0001_01C42ED5.51329E00
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit

I'm having problems installing on fedora core. I originally attempted
install on redhat 9 but fubar'ed my system so I reformatted and went
with fedora core. All the rpm's installed except the Postgres server
which fails with a libcom_err.so.3 dependency error. I researched it and
there are conflicting fixes. One person says install the redhat 9
Kerberos packages, another says just symlink to libcom_err.so.2. Has
anyone else had this problem and what is the correct fix.

------=_NextPart_000_0001_01C42ED5.51329E00
Content-Type: text/html;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

<html xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns=3D"http://www.w3.org/TR/REC-html40">

<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">


<meta name=3DProgId content=3DWord.Document>
<meta name=3DGenerator content=3D"Microsoft Word 10">
<meta name=3DOriginator content=3D"Microsoft Word 10">
<link rel=3DFile-List href=3D"cid:filelist.xml@01C42ED5.50062BF0">
<!--[if gte mso 9]><xml>
 <o:OfficeDocumentSettings>
  <o:DoNotRelyOnCSS/>
 </o:OfficeDocumentSettings>
</xml><![endif]--><!--[if gte mso 9]><xml>
 <w:WordDocument>
  <w:SpellingState>Clean</w:SpellingState>
  <w:GrammarState>Clean</w:GrammarState>
  <w:DocumentKind>DocumentEmail</w:DocumentKind>
  <w:EnvelopeVis/>
  <w:Compatibility>
   <w:BreakWrappedTables/>
   <w:SnapToGridInCell/>
   <w:WrapTextWithPunct/>
   <w:UseAsianBreakRules/>
  </w:Compatibility>
  <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
 </w:WordDocument>
</xml><![endif]-->
<style>
<!--
 /* Style Definitions */
 p.MsoNormal, li.MsoNormal, div.MsoNormal
	{mso-style-parent:"";
	margin:0in;
	margin-bottom:.0001pt;
	mso-pagination:widow-orphan;
	font-size:12.0pt;
	font-family:"Times New Roman";
	mso-fareast-font-family:"Times New Roman";}
a:link, span.MsoHyperlink
	{color:blue;
	text-decoration:underline;
	text-underline:single;}
a:visited, span.MsoHyperlinkFollowed
	{color:purple;
	text-decoration:underline;
	text-underline:single;}
span.EmailStyle17
	{mso-style-type:personal-compose;
	mso-style-noshow:yes;
	mso-ansi-font-size:10.0pt;
	mso-bidi-font-size:10.0pt;
	font-family:Arial;
	mso-ascii-font-family:Arial;
	mso-hansi-font-family:Arial;
	mso-bidi-font-family:Arial;
	color:windowtext;}
span.SpellE
	{mso-style-name:"";
	mso-spl-e:yes;}
@page Section1
	{size:8.5in 11.0in;
	margin:1.0in 1.25in 1.0in 1.25in;
	mso-header-margin:.5in;
	mso-footer-margin:.5in;
	mso-paper-source:0;}
div.Section1
	{page:Section1;}
-->
</style>
<!--[if gte mso 10]>
<style>
 /* Style Definitions */=20
 table.MsoNormalTable
	{mso-style-name:"Table Normal";
	mso-tstyle-rowband-size:0;
	mso-tstyle-colband-size:0;
	mso-style-noshow:yes;
	mso-style-parent:"";
	mso-padding-alt:0in 5.4pt 0in 5.4pt;
	mso-para-margin:0in;
	mso-para-margin-bottom:.0001pt;
	mso-pagination:widow-orphan;
	font-size:10.0pt;
	font-family:"Times New Roman";}
</style>
<![endif]-->
</head>

<body lang=3DEN-US link=3Dblue vlink=3Dpurple =
style=3D'tab-interval:.5in'>

<div class=3DSection1>

<p class=3DMsoNormal><font size=3D2 face=3DArial><span =
style=3D'font-size:10.0pt;
font-family:Arial'>I&#8217;m having problems installing on fedora core. =
I
originally attempted install on <span class=3DSpellE>redhat</span> 9 but =
<span
class=3DSpellE>fubar&#8217;ed</span> my system so I reformatted and went =
with
fedora core. All the rpm&#8217;s installed except the Postgres server =
which
fails with a <span class=3DSpellE>libcom_err.so.3</span> dependency =
error. I
researched it and there are conflicting fixes. One person says install =
the <span
class=3DSpellE>redhat</span> 9 Kerberos packages, another says just =
<span
class=3DSpellE>symlink</span> to <span =
class=3DSpellE>libcom_err.so.2</span>. Has
anyone else had this problem and what is the correct =
fix.<o:p></o:p></span></font></p>

</div>

</body>

</html>

------=_NextPart_000_0001_01C42ED5.51329E00--